1. Nbems
  2. Topics

Raspberry Pi: fldigi and flmsg not working together on receive #raspberrypi #fldigi #flmsg

Ron NY3J
 

Jerry, if you check transfer it opens just a list of messages. You have to have a blank flmsg open before you receive one. I don't have open in browser checked because it will open the browser and hide fldigi. I like to open the browser after I receive the message. I don't think you have to have that tab open.

Ron NY3J

On 11/2/22 08:31, Jerry Davis wrote:

Ron,
 
 
I had Open message folder and
I had "Transfer direct to executing flmsg" checked, so I unchecked both of those.
 
Is there a problem if I have open with flmsg and open in browser both checked at the same time?
 
Also, I went into chromium and created a tab with 127.0.0.1:8080 (and it came up with "Custom Form not posted"
Do I need to keep that tab open to receive the form
 
Jerry

----
Extra Ham Operator: WF5W
Registered Linux User: 275424
Raspberry Pi and 3D designer

The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka!" but "That's funny...". - Isaac. Asimov
 
 
Sent: Wednesday, November 02, 2022 at 7:17 AM
From: "Ron NY3J via groups.io" <rwenig@...>
To: nbems@groups.io
Subject: Re: [nbems] Raspberry Pi: fldigi and flmsg not working together on receive #raspberrypi #fldigi #flmsg
Jerry,

In Fldigi, Configure Dialog, Misc, NBEMS interface, make sure you enable the interface, and open with flmsg are checked and it points to the flmsg program. Here's an example of my configuration.



Also, in Flmsg make sure you are in expert mode.



73, Ron NY3J
 
On 11/2/22 08:06, Jerry Davis wrote:
I have latest versions of flmsg and fldigi installed and configured.
I have flgmsg coming up with autostart - and it works fine.

Our club was testing our 2m capability with MT63-500L

Someone sent a MSG and I saw the [WRAP} .... message come across.
My compatriots who were on Windows (flmsg or their browser came up automatically and showed the message in a nice form)
My Rpi did not.

I also looked at the NBEMS files directory, and have seen NO received files at all!

I've done a lsof -i -P -n | grep LISTEN, and it shows that ports 7362 and 8080 are both in listen mode

Is there anything else that I need to do to have this happen? Getting windows is NOT an option, y'all!

Jerry WF5W
 

Jerry Davis
 

Ron,
 
 
I had Open message folder and
I had "Transfer direct to executing flmsg" checked, so I unchecked both of those.
 
Is there a problem if I have open with flmsg and open in browser both checked at the same time?
 
Also, I went into chromium and created a tab with 127.0.0.1:8080 (and it came up with "Custom Form not posted"
Do I need to keep that tab open to receive the form
 
Jerry

----
Extra Ham Operator: WF5W
Registered Linux User: 275424
Raspberry Pi and 3D designer

The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka!" but "That's funny...". - Isaac. Asimov

 
 
Sent: Wednesday, November 02, 2022 at 7:17 AM
From: "Ron NY3J via groups.io" <rwenig@...>
To: nbems@groups.io
Subject: Re: [nbems] Raspberry Pi: fldigi and flmsg not working together on receive #raspberrypi #fldigi #flmsg
Jerry,

In Fldigi, Configure Dialog, Misc, NBEMS interface, make sure you enable the interface, and open with flmsg are checked and it points to the flmsg program. Here's an example of my configuration.



Also, in Flmsg make sure you are in expert mode.



73, Ron NY3J
 
On 11/2/22 08:06, Jerry Davis wrote:
I have latest versions of flmsg and fldigi installed and configured.
I have flgmsg coming up with autostart - and it works fine.

Our club was testing our 2m capability with MT63-500L

Someone sent a MSG and I saw the [WRAP} .... message come across.
My compatriots who were on Windows (flmsg or their browser came up automatically and showed the message in a nice form)
My Rpi did not.

I also looked at the NBEMS files directory, and have seen NO received files at all!

I've done a lsof -i -P -n | grep LISTEN, and it shows that ports 7362 and 8080 are both in listen mode

Is there anything else that I need to do to have this happen? Getting windows is NOT an option, y'all!

Jerry WF5W
 

Ron NY3J
 

Jerry,

In Fldigi, Configure Dialog, Misc, NBEMS interface, make sure you enable the interface, and open with flmsg are checked and it points to the flmsg program. Here's an example of my configuration.



Also, in Flmsg make sure you are in expert mode.



73, Ron NY3J

On 11/2/22 08:06, Jerry Davis wrote:

I have latest versions of flmsg and fldigi installed and configured.
I have flgmsg coming up with autostart - and it works fine.

Our club was testing our 2m capability with MT63-500L

Someone sent a MSG and I saw the [WRAP} .... message come across.
My compatriots who were on Windows (flmsg or their browser came up automatically and showed the message in a nice form)
My Rpi did not.

I also looked at the NBEMS files directory, and have seen NO received files at all!

I've done a lsof -i -P -n | grep LISTEN, and it shows that ports 7362 and 8080 are both in listen mode

Is there anything else that I need to do to have this happen? Getting windows is NOT an option, y'all!

Jerry WF5W

Jerry Davis
 

I have latest versions of flmsg and fldigi installed and configured.
I have flgmsg coming up with autostart - and it works fine.

Our club was testing our 2m capability with MT63-500L

Someone sent a MSG and I saw the [WRAP} .... message come across.
My compatriots who were on Windows (flmsg or their browser came up automatically and showed the message in a nice form)
My Rpi did not.

I also looked at the NBEMS files directory, and have seen NO received files at all!

I've done a lsof -i -P -n | grep LISTEN, and it shows that ports 7362 and 8080 are both in listen mode

Is there anything else that I need to do to have this happen? Getting windows is NOT an option, y'all!

Jerry WF5W

1 - 4 of 4