Topics

flrig 1.3.29 posted

Dave
 

At http://www.w1hkj.com

and Source Forge

Version 1.3.29

  * Maintenance release

  TS990 update

    * Enable MON on/off for TX monitoring
    * Set / Read SWR & ALC
    * Replace all atoi(...) code with fm_decimal(p, n)

  FT817

    * added code to read vfo B state
    * added 5 watt power scale
    * added undocumented read vfo A/B state
    0x00 0x55 0x00 0x00 0xBB
    * Implement undocumented CAT command BD to read
    PWR, SWR and ALC
    * Prevent flrig from making changes to xcvr vfo
    mode etc. when memory channel usage detected
    - display MEMORY on flrig main display when
      so detected
    * disabled POWER control on wide and touch UI

  Xcvr Init

    * cleaned up init code to provide improved code readability
    * added test for two vfos to VFO initialization

  k3 kx3

    * code change needed to read K3/KX3 meters

  AGC button

    * set button illumination to user color selection

  initial bandwidth

    * retain xcvr bandwidth when changing modes via xmlrpc server
    command

  BCD/Decimal conversions

    * change parameter passing to string vice sz pointer.
    - 64 bit compiles were passing null strings when contents
      of original substr returned values were similar to "00 40" !

  Missing tooltips

    * Added tooltips for S-meter, CW-wpm

  Polling

    * Add set all for meters & operating controls

  TS480SAT update

    * Update to NR, AN, and Squelch controls
    * Change default baud rate to 57600

  FT817 metering

    * Enable S-meter and Power-out metering

  Exchange-Equalize AB

    * Implement Exchange CAT command for Icom xcvrs
    - 718, 706MKIIG
    - 746, 746PRO, 756, 756PRO2, 756PRO3
    - 7000, 7100, 7200, 7300, 7410, 7600, 7800
    - 910, 9100

  IC7300 update

    * all updates combined effort of KB1OIQ and W1HKJ
    * change mode set/get methods
    * correct various command strings
    * added AGC, OFF, FAST, MED, SLO
    * add IF shift function using upper/lower passband tuning commands.
    - IF shift slider range changes to +/- BW/2 as bandwidth
      is selected.
    - IF shift slider always increments by 50 Hz
    * added tooltips to VOX and Compression controls

  PCR1000 update

    * correction to IF Shift control method
    * corrected various text strings

  IC7200 mods

    * modify set_split method
    * add get_split, can_split methods
    * add IF shift function using upper/lower passband
    tuning commands.
    - IF shift slider range changes to +/- BW/2 as bandwidth
      is selected.
    - IF shift slider always increments by 50 Hz
    * correct logic for queA / queB processing

73, David
W1HKJ