Date   
flrig 1.3.49.08 posted

Dave
 

flrig 1.3.49.07 posted

Dave
 

Re: Linux Macro File Transfer

Ed W3NR
 

Seems like a lot of extra work when a simple copy/paste works.

Ed W3NR

Re: Linux Macro File Transfer

Ron
 

Lynn,

Use a thumb drive and copy the macros on the Windows PC C:\USERS\(your sign on)\fldigi.files\ to your Linux PC /home/(your sign on)/.fldigi/macros folder. The problem I've found is the Macros on the Linux machine show up with ^M as line endings. It will still work but it's confusing. There is a program called unix2dos that will change these line endings.

73, Ron NY3J

On 2/18/20 7:16 PM, Lynn DeHart wrote:
I am looking for a way to transfer my Windoes Macro file into a Raspberry Pi Fldigi sysstem. Any suggestions?

Re: Linux Macro File Transfer

Jon - K7RMZ
 

VNC has a file transfer feature that works great. Either Raspi-config or apt-get will get VNC installed on your pi.

Re: Linux Macro File Transfer

Ed W3NR
 

On 2/18/20 7:16 PM, Lynn DeHart wrote:
I am looking for a way to transfer my Windoes Macro file into a Raspberry Pi Fldigi sysstem. Any suggestions?
_._,_._,_

Be easy with a USB stick.

Ed W3NR

Linux Macro File Transfer

 

I am looking for a way to transfer my Windoes Macro file into a Raspberry Pi Fldigi sysstem. Any suggestions?

flrig-1.3.49.06 posted

Dave
 

At http://www.w1hkj.com/alpha/flrig/

Update to flrig documentation:

Date:   Tue Feb 18 10:23:48 2020 -0600

    Doc Update
   
      * add location and descriptions of configuration and data files

    mat file aging
   
      * add aging for freq-mode list files (.mat)

    KX3
   
      * Change default if_shift for digital modes to 1500

    Slider controls
   
      * bug fix - disallow UI slider changes when volume muted
      * bug fix - do not transfer data to xcvr on event FL_LEAVE
      * correct slider behavior using mouse wheel

    IC7100
   
      * add
        - ref adjust
        - calibrate table for power out

    mkappbundle
   
      * modified 'version' to include patch number

    User Command Buttons
   
      * Add SHIFT and CONTROL usage to all command buttons
        - allows user to assign on/off etc usage to a single
          command button.

    FTdx9000D
   
      * remap power i/o to 5...200 W
      * correct vfoB selection
      * corect width selection

    FTdx101MP
   
      * add FTdx101MP class based off of FTdx101D

    Yaesu tuner
   
      * change get/set tuner methods for these xcvrs
        - FT991, FT991A

    Commands
   
      * correct indexing error

73, David, W1HKJ

flrig test version 1.3.49.05

Dave
 

Posted at http://www.w1hkj.com/alpha/flrig/

Date:   Sat Feb 15 00:07:00 2020 -0600

  Slider controls
    * bug fix - disallow UI slider changes when volume muted
    * bug fix - do not transfer data to xcvr on event FL_LEAVE

  IC7100
    * add
      - ref adjust
      - calibrate table for power out

  mkappbundle
    * modified 'version' to include patch number

  User Command Buttons
    * Add SHIFT and CONTROL usage to all command buttons
      - allows user to assign on/off etc usage to a single command button.

  FTdx9000D
    * remap power i/o to 5...200 W
    * correct vfoB selection
    * corect width selection

  FTdx101MP
    * add FTdx101MP class based off of FTdx101D

  Yaesu tuner
    * change get/set tuner methods for these xcvrs
      - FT991, FT991A

  Commands
    * correct indexing error

73, David, W1HKJ


Re: Raspberry Pi based remote operation article in March 2020 QST

Dave
 

DONE

Dave

On 2/7/20 2:04 PM, Harry Bloomberg wrote:
I wrote a short article on remote operation using NoMachine, Fldigi/Flrig, and a Raspberry Pi that has been published in March QST.  I've attached a copy below.  Links to more detailed documentation may be found at http://www.w1hkj.com/W3YJ/ .

Thanks to Dave W1HKJ for the space on his ftp server and for all the fine work he's done with his team on the entire NBEMS suite.

It's been suggested that I also crosspost this to the winfldigi group.  I'm trying to cut down on the number of emails I receive and I do not belong to that list, could somebody please forward my article and link there?

73,
Harry Bloomberg W3YJ

Raspberry Pi based remote operation article in March 2020 QST

Harry Bloomberg
 

I wrote a short article on remote operation using NoMachine, Fldigi/Flrig, and a Raspberry Pi that has been published in March QST.  I've attached a copy below.  Links to more detailed documentation may be found at http://www.w1hkj.com/W3YJ/ .

Thanks to Dave W1HKJ for the space on his ftp server and for all the fine work he's done with his team on the entire NBEMS suite.

It's been suggested that I also crosspost this to the winfldigi group.  I'm trying to cut down on the number of emails I receive and I do not belong to that list, could somebody please forward my article and link there?

73,
Harry Bloomberg W3YJ

Re: fldigi install error

Brian T Schmidt
 

NIce


On Tue, Feb 4, 2020 at 7:25 PM Dave <w1hkj@...> wrote:

No Brian, I have to stay close to home.

Dave

On 2/4/20 5:26 PM, Brian T Schmidt wrote:
yes...just re-downloaded original file.

Re ran setup again and is working...

Fresh image of Cinnamon 19.3 and hour ago.

Loaded flrig and got that working..

Had to rerun fldigi a second time and now it is working...weird.

Thanks Dave

Are you going to be a Hamcation?

NI0P

Brian

Re: fldigi install error

Dave
 

No Brian, I have to stay close to home.

Dave

On 2/4/20 5:26 PM, Brian T Schmidt wrote:
yes...just re-downloaded original file.

Re ran setup again and is working...

Fresh image of Cinnamon 19.3 and hour ago.

Loaded flrig and got that working..

Had to rerun fldigi a second time and now it is working...weird.

Thanks Dave

Are you going to be a Hamcation?

NI0P

Brian

Re: fldigi install error

Brian T Schmidt
 

yes...just re-downloaded original file.

Re ran setup again and is working...

Fresh image of Cinnamon 19.3 and hour ago.

Loaded flrig and got that working..

Had to rerun fldigi a second time and now it is working...weird.

Thanks Dave

Are you going to be a Hamcation?

NI0P

Brian

Re: fldigi install error

Dave
 

Did you follow the build wiki to a "t"?  http://www.w1hkj.com/doku/doku.php?id=howto:building_on_debian-ubuntu-mint

David


fldigi install error

Brian T Schmidt
 

Can someone help me with this? Lots for erros during fldigi install on Mint Linux

soundcard/sound.cxx: In constructor ‘SoundPort::SoundPort(const char*, const char*)’:
soundcard/sound.cxx:1262:2: error: ‘req_sample_rate’ was not declared in this scope
  req_sample_rate = 0;
  ^~~~~~~~~~~~~~~
soundcard/sound.cxx:1262:2: note: suggested alternative: ‘resample_write’
  req_sample_rate = 0;
  ^~~~~~~~~~~~~~~
  resample_write
soundcard/sound.cxx: In member function ‘virtual int SoundPort::Open(int, int)’:
soundcard/sound.cxx:1372:29: error: ‘req_sample_rate’ was not declared in this scope
  int old_sample_rate = (int)req_sample_rate;
                             ^~~~~~~~~~~~~~~
soundcard/sound.cxx:1372:29: note: suggested alternative: ‘old_sample_rate’
  int old_sample_rate = (int)req_sample_rate;
                             ^~~~~~~~~~~~~~~
                             old_sample_rate
soundcard/sound.cxx: In member function ‘virtual size_t SoundPort::Read(float*, size_t)’:
soundcard/sound.cxx:1552:20: error: ‘req_sample_rate’ was not declared in this scope
  sd[0].src_ratio = req_sample_rate / (sd[0].dev_sample_rate * (1.0 + rxppm / 1e6));
                    ^~~~~~~~~~~~~~~
soundcard/sound.cxx:1552:20: note: suggested alternative: ‘resample_write’
  sd[0].src_ratio = req_sample_rate / (sd[0].dev_sample_rate * (1.0 + rxppm / 1e6));
                    ^~~~~~~~~~~~~~~
                    resample_write
soundcard/sound.cxx: In member function ‘virtual size_t SoundPort::resample_write(float*, size_t)’:
soundcard/sound.cxx:1719:6: error: ‘req_sample_rate’ was not declared in this scope
  if (req_sample_rate != sd[1].dev_sample_rate || progdefaults.TX_corr != 0) {
      ^~~~~~~~~~~~~~~
soundcard/sound.cxx:1719:6: note: suggested alternative: ‘resample_write’
  if (req_sample_rate != sd[1].dev_sample_rate || progdefaults.TX_corr != 0) {
      ^~~~~~~~~~~~~~~
      resample_write
soundcard/sound.cxx: In member function ‘void SoundPort::src_data_reset(unsigned int)’:
soundcard/sound.cxx:1806:21: error: ‘req_sample_rate’ was not declared in this scope
   sd[0].src_ratio = req_sample_rate / (sd[0].dev_sample_rate * (1.0 + rxppm / 1e6));
                     ^~~~~~~~~~~~~~~
soundcard/sound.cxx:1806:21: note: suggested alternative: ‘resample_write’
   sd[0].src_ratio = req_sample_rate / (sd[0].dev_sample_rate * (1.0 + rxppm / 1e6));
                     ^~~~~~~~~~~~~~~
                     resample_write
soundcard/sound.cxx:1816:74: error: ‘req_sample_rate’ was not declared in this scope
 src_data->src_ratio = sd[1].dev_sample_rate * (1.0 + txppm / 1e6) / req_sample_rate;
                                                                     ^~~~~~~~~~~~~~~
soundcard/sound.cxx:1816:74: note: suggested alternative: ‘resample_write’
 src_data->src_ratio = sd[1].dev_sample_rate * (1.0 + txppm / 1e6) / req_sample_rate;
                                                                     ^~~~~~~~~~~~~~~
                                                                          resample_write
In file included from ./config.h:589:0,
                 from soundcard/sound.cxx:27:
soundcard/sound.cxx:1821:10: error: ‘req_sample_rate’ was not declared in this scope
      MAX(req_sample_rate, sd[dir].dev_sample_rate) /
          ^
./include/util.h:46:26: note: in definition of macro ‘MAX’
 #    define MAX(a, b) (((a) > (b)) ? (a) : (b))
                          ^
soundcard/sound.cxx:1821:6: note: in expansion of macro ‘MAX’
      MAX(req_sample_rate, sd[dir].dev_sample_rate) /
      ^~~
soundcard/sound.cxx:1821:10: note: suggested alternative: ‘resample_write’
      MAX(req_sample_rate, sd[dir].dev_sample_rate) /
          ^
./include/util.h:46:26: note: in definition of macro ‘MAX’
 #    define MAX(a, b) (((a) > (b)) ? (a) : (b))
                          ^
soundcard/sound.cxx:1821:6: note: in expansion of macro ‘MAX’
      MAX(req_sample_rate, sd[dir].dev_sample_rate) /
      ^~~
soundcard/sound.cxx: In member function ‘void SoundPort::init_stream(unsigned int)’:
soundcard/sound.cxx:1962:34: error: ‘req_sample_rate’ was not declared in this scope
   if (sd[dir].dev_sample_rate != req_sample_rate)
                                  ^~~~~~~~~~~~~~~
soundcard/sound.cxx:1962:34: note: suggested alternative: ‘resample_write’
   if (sd[dir].dev_sample_rate != req_sample_rate)
                                  ^~~~~~~~~~~~~~~
                                  resample_write
soundcard/sound.cxx: In member function ‘double SoundPort::find_srate(unsigned int)’:
soundcard/sound.cxx:2124:7: error: ‘req_sample_rate’ was not declared in this scope
   if (req_sample_rate == *i || (*sd[dir].idev)->defaultSampleRate == *i)
       ^~~~~~~~~~~~~~~
soundcard/sound.cxx:2124:7: note: suggested alternative: ‘resample_write’
   if (req_sample_rate == *i || (*sd[dir].idev)->defaultSampleRate == *i)
       ^~~~~~~~~~~~~~~
       resample_write
Makefile:7090: recipe for target 'soundcard/fldigi-sound.o' failed
make[3]: *** [soundcard/fldigi-sound.o] Error 1
make[3]: Leaving directory '/home/brian/Downloads/fldigi-4.1.09/src'
Makefile:8106: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '/home/brian/Downloads/fldigi-4.1.09/src'
Makefile:1667: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/home/brian/Downloads/fldigi-4.1.09/src'
Makefile:469: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1

Re: FLRIG an ICOM 7200 and a fresh image of Mint #flrig

Brian T Schmidt
 

Did fresh install again slowed down and flrig is working. Wrote notes. Don't know what the original issue was.

NI0P
Brian

Re: #flmsg #flmsg

Paolo Emanuelli
 

Thanks a lot Dave for prompt reply, I use Windows 10Pro on remote station.

this station is used by a group of local operators and some with low internet bandwidth.
So if it were possible to do default spectrum, it would be a good thing

Ciao Paolo

Re: FLRIG an ICOM 7200 and a fresh image of Mint #flrig

Brian T Schmidt
 

I think I might have found a solution. Need to dupilcate the fix to verify. Was a folder permission issue possible. The folder that had the silican labs file..

Brian

Re: FLRIG an ICOM 7200 and a fresh image of Mint #flrig

Brian T Schmidt
 

UPDATE.

reimaged computer again since it only took my a few minutes. Did updates. Only other software I have installed is flrig but I installed it with Software manager this time so I have an older version installed and still having the same issue. Also change the USB cable just to make sure and no difference.

Is there some security in Mint 19.3 that might be blocking it?

NI0P

Brian