OK David. I plan to transmit the MFSK Wide modes this weekend on Shortwave Radiogram. In the meantime, the audio for the experiment is here

Kim, Be sure to notify your listener audience if you decide to include the MFSK wide modes in an HF/AM broadcast. Those mode are only in 4.1.15.05 and higher. These

Fldigi 4.1.15.05 works fine on my W10 machine. I do have a question though. This has been going on for many versions for me. When I put a call in the call box and I click on the QRZ globe, it brings

Found my way to Window Defender Exclusions (never had to use it before), and now 4.1.15.05 is installed, and it opens. Looking forward to trying the MFSK Wide modes. Thanks Dave.

Kim, I just downloaded and tested 4.1.15.05 on a Dell Latitude Notebook, Windows 10 Professional, 64 bit. Windows Defender did require specific download and install

Neil, W0NRP, I may be answering the wrong question but this has been my experience with HF sound card and VHF sound card settings using a signalink. On HF you put the radio

Dave, On my Windows 10 PC, I am unable to execute fldigi-4.1.15.05_setup.exe Fldigi-4.1.15_setup.exe opens OK. Thanks Kim KD9XB

Ok, got AndFlmsg up and running again. For what it is worth, it took adding the "FTP plug in" to "Total Commander," the phone's file manager. The Google file manager seemed stymied. Why this worked,

http://www.w1hkj.com/alpha/fldigi fldigi-4.1.15.05.tar.gz fldigi-4.1.15.05_i386.dmg fldigi-4.1.15.05_setup.exe

Thanks Vince, Good to hear. Might then be the model of phone I am using, Nokia 3.1. 73, KIMBR Ole

Addendum; tested an older 6" Samsung tablet: AndFlmsg opened and the tablet connected to Windows 10 with no problem. Thus wondering whether something is askew with Android 10. After the update from

I have Android 10 (updated Friday) on a Galaxy S10e with no issues.

The update, if of interest, was from Android 9 to Android 10.

Hi John, Whatever the Android OS update yesterday did to my phone appears to have blocked; AndFlmsg settings for location (thus not allowing the app to open), connecting to the desktop to reload

Hi John, Apologies for the late reply. The above looks familiar. However, my phone updated its Android operating system and a number of things now do not work, including AndFlmsg. The phone refuses

Hi Dave, could you pls take a look to signlal browser in CW? It still present running QSOs on wrong frequeny. This Example a QSO on 3530, correctly shown in waterfall as 3529+1000 but in signal

Every signal generated by fldigi will have a peak-to-peak audio signal that is equal to or less than the "Tune" signal. If you follow the advice of Harry or John using the tune

You're right...it's been a while since I've done NBEMS on VHF/UHF FM. Slightly lower audio level than voice is indeed the best. And a deviation meter is just not needed. 73, Harry W3YJ

Hi All, To adjust audio-levels for FM you can listen to your own voice-signal through a scanner and adjust your digital-Tx-audio to be slightly quieter than voice (to prevent overdriving). Better to

My opinion as somebody who used to conduct a ton of NBEMS training... Getting the modulation perfectly set on VHF/UHF FM isn't worth the time and trouble. Adjust so that the transmitted NBEMS audio