Linux Debian Stretch, fldigi 4.1.00 built from source (flarq being included within fldigi)

Please test this combination flamp-2.2.05.02.tar.gz flamp-2.2.05.02_setup.exe fldigi-4.1.02.02.tar.gz

What versions are you running. Are you using Windows, Linix or Apple?

The beacon period is set? I think the default is 60 seconds. My flarq has a countdown timer next to the beacon/button and seems to work. Are you seeing flarq hang? If so I'd suggest the

When I start beaconing, FLARC sends a beacon to FLDIGI and FLDIGI sends the beacon. My issue is that the beacon status goes to 'Beaconing' but never beacons again and can not be turned off. Any help

The problem is that the Digital USB mode provides a narrow “sweet spot”. Bring up the “F” menu and find Shift and Width. Set Shift to 1200 (maximum) Set Width to 2400 That’s what works

HI there, Yep, I wish I was paying more attention to the series of events that fixed it, but it is working now. Thanks again, -bh k3tfm

Hi This may not make much sense but maybe just entering and leaving the setup area and looking around, not even clicking anything and then saving again curred it. Just a thought. Marty kd8bj

Might the rig have DSP set differently (e.g., Width & Shift) for different modes?

Hi there, The modem and sound card is internal to the FT-991A. Reading the manual they say that for data mode the rig must be in data mode. That said, I saw that I could transmit but I saw that on the

without knowing the rig personally I would say data mode automatically adds filtering to cut out the outsides of the band. You can work in the waterfall in data mode or see the full spectrum in

I don’t the run rig control. I use the front congtrols on the radio, FT-920. Anyway, sound's like you have it "fixed", even if you really don't understand "what" did it! Onward and upward!

Thanks for the response. I’ve read the manuals to no avail and thought that’s why I’d ask here for some help. Based on another response talking about notch filter I went and checked that which

Thank you for the reply. Notch filter is OFF in the plain SSB modes (Non data) and is not an option when DATA-xSB is selected. What I don’t understand right now is that it started working … when I

I have an older plain FT-991… your answer is in the menus. You can select the data mode bandwidth there. If I was at my radio I could assist further but I’m not… The manual is your friend.

Just had our first 1 hour interval without rain and thunderstorms in the past 48 hours. I tested flamp 2.2.04 and fldigi 4.1.01 with multiple file transfers. Both running on Linux Mint 18.3 /

What radio are you using? Do you have any notch filtering set up???

Good evening. I am new to fldigi this may just be a newbie thing. fldigi v4.1.00 Rig: Yaesu FT-991a OS: MAC OS X 10.13.6 Digi Mode: BPSK31 With the FT-991a mode set to DATA-LSB (or DATA-USB) the width

There does seem to be something amiss here. On the first transmission of an 8PSK1200F file the headers were completely missed. The second transmission using 8PSK1000F skipped blocks as shown... <DATA

I will test here running a multifile flamp transmission. Dave