without knowing the rig personally I would say data mode automatically adds filtering to cut out the outsides of the band. You can work in the waterfall in data mode or see the full spectrum in

Hi there, The modem and sound card is internal to the FT-991A. Reading the manual they say that for data mode the rig must be in data mode. That said, I saw that I could transmit but I saw that on the

Might the rig have DSP set differently (e.g., Width & Shift) for different modes?

Hi This may not make much sense but maybe just entering and leaving the setup area and looking around, not even clicking anything and then saving again curred it. Just a thought. Marty kd8bj

HI there, Yep, I wish I was paying more attention to the series of events that fixed it, but it is working now. Thanks again, -bh k3tfm

The problem is that the Digital USB mode provides a narrow “sweet spot”. Bring up the “F” menu and find Shift and Width. Set Shift to 1200 (maximum) Set Width to 2400 That’s what works

When I start beaconing, FLARC sends a beacon to FLDIGI and FLDIGI sends the beacon. My issue is that the beacon status goes to 'Beaconing' but never beacons again and can not be turned off. Any help

The beacon period is set? I think the default is 60 seconds. My flarq has a countdown timer next to the beacon/button and seems to work. Are you seeing flarq hang? If so I'd suggest the

What versions are you running. Are you using Windows, Linix or Apple?

Please test this combination flamp-2.2.05.02.tar.gz flamp-2.2.05.02_setup.exe fldigi-4.1.02.02.tar.gz

Linux Debian Stretch, fldigi 4.1.00 built from source (flarq being included within fldigi)

Hi there, That was it …. VERY MUCH APPRECIATED !! Mine seems to reset on power cycle, but no big deal I suppose … Thanks again and take care !! -bh k3tfm

Thank you for letting me join the group. I am having a couple of issues with this version. 1: WX no longer works . 2: When I change frequency from 40m to 20m the Frq box stays in 40m making it

Being worked on. What are you using for rig control ? Use the drop down. Ed W3NR

Ed, I am not using any rig control. I never got it to work with my Ten-Tec Jupiter. I am connected to radio via SignalLink USB. I just not that savvy to figure out how to make any of the rig controls

I was the alpha tester when the jupiter was added to flrrig and it worked perfectly, so I don't know what problem you had. Without rig control it must be done manually. Is this a

Ed I don’t know anything about flrrig. There was no information from Ten-Tec or anyone else. So would you like to help me with that? I have been doing it manually and it wasn’t a problem. I got

Dave, I tried that version and it didn't resolve the issues I had from previous one. WX issue was one and I see you are working on that and Frq box doesn't change from 40m to 20m when I change to 20m

Good evening. --- Fldigi 4.1.0.0 MAC OS High Sierra 10.13.6 Tsql: 2.4.3 — When I try to use Fldigi to automatically update LoTW I get an error that says that the mode is missing, In this case

Not realizing that the Help -> “Check for updates” doesn’t actually check for updates since it kept tell me that no updates are available. I manually found a v4.1.01 that says it fixes this