Thank you for the reply. Notch filter is OFF in the plain SSB modes (Non data) and is not an option when DATA-xSB is selected. What I don’t understand right now is that it started working … when I

Thanks for the response. I’ve read the manuals to no avail and thought that’s why I’d ask here for some help. Based on another response talking about notch filter I went and checked that which

I don’t the run rig control. I use the front congtrols on the radio, FT-920. Anyway, sound's like you have it "fixed", even if you really don't understand "what" did it! Onward and upward!

without knowing the rig personally I would say data mode automatically adds filtering to cut out the outsides of the band. You can work in the waterfall in data mode or see the full spectrum in

Hi there, The modem and sound card is internal to the FT-991A. Reading the manual they say that for data mode the rig must be in data mode. That said, I saw that I could transmit but I saw that on the

Might the rig have DSP set differently (e.g., Width & Shift) for different modes?

Hi This may not make much sense but maybe just entering and leaving the setup area and looking around, not even clicking anything and then saving again curred it. Just a thought. Marty kd8bj

HI there, Yep, I wish I was paying more attention to the series of events that fixed it, but it is working now. Thanks again, -bh k3tfm

The problem is that the Digital USB mode provides a narrow “sweet spot”. Bring up the “F” menu and find Shift and Width. Set Shift to 1200 (maximum) Set Width to 2400 That’s what works

When I start beaconing, FLARC sends a beacon to FLDIGI and FLDIGI sends the beacon. My issue is that the beacon status goes to 'Beaconing' but never beacons again and can not be turned off. Any help

The beacon period is set? I think the default is 60 seconds. My flarq has a countdown timer next to the beacon/button and seems to work. Are you seeing flarq hang? If so I'd suggest the

What versions are you running. Are you using Windows, Linix or Apple?

Please test this combination flamp-2.2.05.02.tar.gz flamp-2.2.05.02_setup.exe fldigi-4.1.02.02.tar.gz

Linux Debian Stretch, fldigi 4.1.00 built from source (flarq being included within fldigi)

Hi there, That was it …. VERY MUCH APPRECIATED !! Mine seems to reset on power cycle, but no big deal I suppose … Thanks again and take care !! -bh k3tfm

Thank you for letting me join the group. I am having a couple of issues with this version. 1: WX no longer works . 2: When I change frequency from 40m to 20m the Frq box stays in 40m making it

Being worked on. What are you using for rig control ? Use the drop down. Ed W3NR

Ed, I am not using any rig control. I never got it to work with my Ten-Tec Jupiter. I am connected to radio via SignalLink USB. I just not that savvy to figure out how to make any of the rig controls

I was the alpha tester when the jupiter was added to flrrig and it worked perfectly, so I don't know what problem you had. Without rig control it must be done manually. Is this a

Ed I don’t know anything about flrrig. There was no information from Ten-Tec or anyone else. So would you like to help me with that? I have been doing it manually and it wasn’t a problem. I got