Date   

2m default frequency...

"Jeffrey P. Nast" <jpnast@...>
 

Noticed in VBdigi that the 2m default frequency is 144.144 with the
tone at 144.145.

Not sure about your radios, but I can't tune to 144.144 because my 2m
radio only allows 5kHz steps... closest I can get it 144.145.

I deleted the default and put in my own. Perhaps change the default?

Thank you!!!!
-Jeff Nast
KCØMKS


Re: 2m default frequency...

larrytkc@...
 

Jeff,
 
My FT897d only does 5 kHz steps in the FM mode, the reference to 144.144 is for SSB mode. The lower part of 2M is usually reserved for CW/SSB modes. Try your rig using USB (or DIG) mode - BTW using a simplex freq @... in FM mode, works great and brings in a lot more Hams that don't have SSB capability.
Perhaps in the future we can try some "0 region" 80/40 M VBdigi? It might prove interesting to check out.
 
73 & GL on the waterfall,
Larry kb0emb
KC metro
 
In a message dated 1/11/2008 12:33:23 AM Central Standard Time, jpnast@....us writes:
Noticed in VBdigi that the 2m default frequency is 144.144 with the
tone at 144.145.

Not sure about your radios, but I can't tune to 144.144 because my 2m
radio only allows 5kHz steps... closest I can get it 144.145.

I deleted the default and put in my own. Perhaps change the default?

Thank you!!!!
-Jeff Nast
KCØMKS
 




Start the year off right. Easy ways to stay in shape in the new year.


Re: Setting up Sylpheed account

"Bill - N8ET" <n8et@...>
 

Hi Skip -

I am actually using gmail and PSKmail...

My problem with PSKmail is getting communications between PSKmail and
Sylpheed set up - I assume that the same sort of setup takes place for
NBEMS.

I can see the e-mails coming thru PSKmail, but they never seem to make it
to Sylpheed - I assume because some file pointer or path is not set correctly
somewhere...



>
Bill,

From this page:

http://help. channels.aol.com/kjump.adp?articleId=217449

E-mail Application Setup Basics
Setting up access to the AOL® or AIM® Mail servers is simple, and the
settings are similar for most e-mail applications.

The basic information that you need to setup using IMAP and POP3 is as
follows:

a.. Your e-mail address is screenname@... or screenname@....
b.. Be sure to include the @... or @... suffix.
c.. The incoming mail (POP) server address is: imap.aol.com and
imap.aim.com for IMAP and pop.aol.com or pop.aim.com for POP3.
d.. Check the box for Leaving messages on the server.
e.. The outgoing mail (SMTP) server address is: smtp.aol.com or
smtp.aim.com, port: 587.
f.. Your user name is your AOL or AIM screen name.
g.. Your password is your AOL® or AIM® password.

73, Skip KH6TY

----- Original Message -----
From: "Bill - N8ET" <n8et@...>
To: "Ed" <autek@...>; <NBEMSham@...>
Sent: Thursday, January 10, 2008 6:10 PM
Subject: Re: [NBEMSham] Setting up Sylpheed account

Hi Ed -

I was about to ask the same question of some folks for PSKmail, so I am
quietly watching this list for someone to hopefully answer.





seelyev wrote:
Could someone go thru the settings for a new email account on
Sylpheed. In particular, what do I input for "Server information" I'm
using a home computer and aol.

Thanks
Do you by chance have a callsign ????

Ed W3NR

--
73 - Bill - N8ET
Kanga US
www.kangaus.com
419-423-4604 (Kanga)
419-423-5643 (home)

------------------------------------------------ ----------

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.0/1216 - Release Date: 1/9/2008
10:16 AM

--
73 - Bill - N8ET
Kanga US
www.kangaus.com
419-423-4604 (Kanga)
419-423-5643 (home)


Re: Setting up Sylpheed account

"kh6ty" <hteller@...>
 

Bill,

From this page:

http://help.channels.aol.com/kjump.adp?articleId=217449

E-mail Application Setup Basics
Setting up access to the AOL� or AIM� Mail servers is simple, and the settings are similar for most e-mail applications.

The basic information that you need to setup using IMAP and POP3 is as follows:

a.. Your e-mail address is screenname@... or screenname@....
b.. Be sure to include the @... or @... suffix.
c.. The incoming mail (POP) server address is: imap.aol.com and imap.aim.com for IMAP and pop.aol.com or pop.aim.com for POP3.
d.. Check the box for Leaving messages on the server.
e.. The outgoing mail (SMTP) server address is: smtp.aol.com or smtp.aim.com, port: 587.
f.. Your user name is your AOL or AIM screen name.
g.. Your password is your AOL� or AIM� password.

73, Skip KH6TY

----- Original Message -----
From: "Bill - N8ET" <n8et@...>
To: "Ed" <autek@...>; <NBEMSham@...>
Sent: Thursday, January 10, 2008 6:10 PM
Subject: Re: [NBEMSham] Setting up Sylpheed account


Hi Ed -

I was about to ask the same question of some folks for PSKmail, so I am
quietly watching this list for someone to hopefully answer.





seelyev wrote:
Could someone go thru the settings for a new email account on
Sylpheed. In particular, what do I input for "Server information" I'm
using a home computer and aol.

Thanks
Do you by chance have a callsign ????

Ed W3NR

--
73 - Bill - N8ET
Kanga US
www.kangaus.com
419-423-4604 (Kanga)
419-423-5643 (home)


--------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.0/1216 - Release Date: 1/9/2008 10:16 AM


Re: Setting up Sylpheed account

"Bill - N8ET" <n8et@...>
 

Hi Ed -

I was about to ask the same question of some folks for PSKmail, so I am
quietly watching this list for someone to hopefully answer.


seelyev wrote:
Could someone go thru the settings for a new email account on
Sylpheed. In particular, what do I input for "Server information" I'm
using a home computer and aol.

Thanks
Do you by chance have a callsign ????

Ed W3NR

--
73 - Bill - N8ET
Kanga US
www.kangaus.com
419-423-4604 (Kanga)
419-423-5643 (home)


Re: Setting up Sylpheed account

Ed <autek@...>
 

seelyev wrote:
Could someone go thru the settings for a new email account on Sylpheed. In particular, what do I input for "Server information" I'm using a home computer and aol.
Thanks
Do you by chance have a callsign ????


Ed W3NR


Setting up Sylpheed account

"seelyev" <SeelyF@...>
 

Could someone go thru the settings for a new email account on
Sylpheed. In particular, what do I input for "Server information" I'm
using a home computer and aol.

Thanks


NBEMS 1.0.02.1 posted

w1hkj <w1hkj@...>
 

Please read the ChangeLog page for details. Also check the flarq help page for information on changes.

If you just testing vbdigi and not flarq you do not need this upgrade as is for changes to flarq.

http://www.w1hkj.com/NBEMS

73, Dave, W1HKJ


Re: Hardware Connections

"R. Kevin Stover" <rkstover@...>
 

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Sam,

Basically you are correct.

If you are going to be in this for any length of time you should
consider getting a interface like the rigblaster, rascals, microkeyer,
etc....They totally isolate the computer from the radio and provide all
the switching which is necessary.


Sam Saladino wrote:
| Software is installed and appears to be working well. Before moving
| on I want to make sure I understand what hardware connections must be
| made between the radio and computer.
|
|>From the "SPEAKER OUT" of the radio goes to the "MICROPHONE IN" of the
| sound card. This is accomplished with a patch cord with proper
| connectors on each end. (Yes/No?)
|
| The "MICROPHONE IN" of the radio goes to the "SPEAKER OUT" of the
| sound card. Also accomplished with a patch cord and proper connectors
| on each end. (Yes/No?)
|
| The PTT circuit of the radio can be controlled either through using
| one of the Serial Ports of the computer, or separate manual switch or
| manual Send/Receive switch on radio. (Yes/No?)
|
| Questions...
|
| 1. The mode on the radio is set to SSB?
| 2. Is there anything else that has to be connected between the
| connections from radio (mic/speaker) and connections to computer to
| the sound card other than the patch cords? Or anything you'd
| recommend to prevent RF getting into the computer during transmit
| along the patch cords? ie ferrite beads, cores, or anything else?
|
| I'm pretty much a newbie to this facet of Ham Radio and the only thing
| I've done in the past is receive a variety of digital signals on my
| computer using the soundcard, but never attempted to transmit. Any
| and all suggestions and help are appreciated. Thanks.
|
| 73s
| Sam NW9T
|
|
|
|
|
|
|
|
| ------------------------------------------------------------------------
|
| No virus found in this incoming message.
| Checked by AVG.
| Version: 7.5.516 / Virus Database: 269.17.13/1211 - Release Date:
1/6/2008 11:57 AM

- --
R. Kevin Stover, AC�H
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHgh1b11jxjloa2wsRAtqnAJsFRoTGketZLvxH1PJYMixJgPpbfACgq8ws
oXjkdmm4YrsPeSKKvNlDTiQ=
=NP60
-----END PGP SIGNATURE-----


Re: Hardware Connections

"David Freese" <w1hkj@...>
 

--- In NBEMSham@..., "Sam Saladino" <ortracr@...> wrote:

Software is installed and appears to be working well. Before moving
on I want to make sure I understand what hardware connections must be
made between the radio and computer.

From the "SPEAKER OUT" of the radio goes to the "MICROPHONE IN" of the
sound card. This is accomplished with a patch cord with proper
connectors on each end. (Yes/No?)
Yes if you are using a notebook computer? On a desktop system you
should use LINE-IN to prevent overdriving the sound card.

The "MICROPHONE IN" of the radio goes to the "SPEAKER OUT" of the
sound card. Also accomplished with a patch cord and proper connectors
on each end. (Yes/No?)
OK, sound cards also have a LINE-OUT. Use LINE-OUT if it is available.

The PTT circuit of the radio can be controlled either through using
one of the Serial Ports of the computer, or separate manual switch or
manual Send/Receive switch on radio. (Yes/No?)
Manual T/R will never be fast enough for digital communications. You
should use a T/R switch that is toggled by RTS if possible. You can
also use the VOX on the transceiver.

Questions...

1. The mode on the radio is set to SSB?
USB for all communications including RTTY.

2. Is there anything else that has to be connected between the
connections from radio (mic/speaker) and connections to computer to
the sound card other than the patch cords? Or anything you'd
recommend to prevent RF getting into the computer during transmit
along the patch cords? ie ferrite beads, cores, or anything else?
If you experience RFI then isolation transformers should be used
between the radio and the computer; on both audio lines. Better yet
you can purchase a suitable digital interface that already has the
audio isolation and PTT circuitry.

73, Dave, W1HKJ


Re: FLarq

"R. Kevin Stover" <rkstover@...>
 

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Thanks Ed.

73


Ed wrote:

| Available here:
|
| http://www.w1hkj.com/flarq_main.html
|
| Ed W3NR

- --
R. Kevin Stover, AC�H
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHghqv11jxjloa2wsRAiDhAJwNDGh9fTlGboR2Rp2AhgzeCQVsxwCfcSe7
sYhhp1DQ8CS0OixfWoYmAI8=
=zDYT
-----END PGP SIGNATURE-----


Hardware Connections

"Sam Saladino" <ortracr@...>
 

Software is installed and appears to be working well. Before moving
on I want to make sure I understand what hardware connections must be
made between the radio and computer.

From the "SPEAKER OUT" of the radio goes to the "MICROPHONE IN" of the
sound card. This is accomplished with a patch cord with proper
connectors on each end. (Yes/No?)

The "MICROPHONE IN" of the radio goes to the "SPEAKER OUT" of the
sound card. Also accomplished with a patch cord and proper connectors
on each end. (Yes/No?)

The PTT circuit of the radio can be controlled either through using
one of the Serial Ports of the computer, or separate manual switch or
manual Send/Receive switch on radio. (Yes/No?)

Questions...

1. The mode on the radio is set to SSB?
2. Is there anything else that has to be connected between the
connections from radio (mic/speaker) and connections to computer to
the sound card other than the patch cords? Or anything you'd
recommend to prevent RF getting into the computer during transmit
along the patch cords? ie ferrite beads, cores, or anything else?

I'm pretty much a newbie to this facet of Ham Radio and the only thing
I've done in the past is receive a variety of digital signals on my
computer using the soundcard, but never attempted to transmit. Any
and all suggestions and help are appreciated. Thanks.

73s
Sam NW9T


Re: NBEM &TS2000 TRINIDAD & TOBAGO

w1hkj <w1hkj@...>
 

julienmervyn wrote:


I have installed the NBEM on a Toshiba 9100 and as well a dell gx 240
the receive is great on psk31 and rtty looking at Egypt on my water
fall as Serbian ,Russia my receive is great but TX it seems no one is
copying me for the amount of stations i call in the last 2 days no
response.

I have been playing around with a ts2000 but i check over the set up
step by step the radio showing TX but no power out i put the radio on
mixw and multipsk great both TX and Rx but on NBEM not getting out any
one have this problem working the ts 2000.

Julien
9Z4FZ.


vbdigi requires both the Rx and the Tx audio to be on the same sound card.  Are you perhaps trying to use 2 sound cards?

Dave


Re: NBEM &TS2000 TRINIDAD & TOBAGO

Ed <autek@...>
 

julienmervyn wrote:
I have installed the NBEM on a Toshiba 9100 and as well a dell gx 240 the receive is great on psk31 and rtty looking at Egypt on my water fall as Serbian ,Russia my receive is great but TX it seems no one is copying me for the amount of stations i call in the last 2 days no response. I have been playing around with a ts2000 but i check over the set up step by step the radio showing TX but no power out i put the radio on mixw and multipsk great both TX and Rx but on NBEM not getting out any one have this problem working the ts 2000. Julien 9Z4FZ.

Julien, you did setup the PTT in NBEMS as described here:

http://www.w1hkj.com/vbdigi-help/vbdigi.html


Ed W3NR


NBEM &TS2000 TRINIDAD & TOBAGO

"julienmervyn" <9z4fz@...>
 

I have installed the NBEM on a Toshiba 9100 and as well a dell gx 240
the receive is great on psk31 and rtty looking at Egypt on my water
fall as Serbian ,Russia my receive is great but TX it seems no one is
copying me for the amount of stations i call in the last 2 days no
response.

I have been playing around with a ts2000 but i check over the set up
step by step the radio showing TX but no power out i put the radio on
mixw and multipsk great both TX and Rx but on NBEM not getting out any
one have this problem working the ts 2000.

Julien
9Z4FZ.


Re: FLarq

Ed <autek@...>
 

R. Kevin Stover wrote:
I've got fldigi, fllogbook, and sylpheed installed on my Ubuntu partition. I need to know where I get flarq for Linux. Do I need to install PSKMail?
TIA
73
AC0H

Available here:

http://www.w1hkj.com/flarq_main.html

Ed W3NR


FLarq

"R. Kevin Stover" <rkstover@...>
 

I've got fldigi, fllogbook, and sylpheed installed on my Ubuntu
partition. I need to know where I get flarq for Linux. Do I need to
install PSKMail?

TIA

73

AC0H


missing link

w1hkj <w1hkj@...>
 

Just to be sure. I uninstalled NBEMS from the XYL's computer. Went to www.w1hkj.com/NBEMS and downloaded the current NBEMS file and did an install. All of the current versions are intact.

Dave


Re: 30M testing

Tom Peterson <tom@...>
 

Check 10.137, there's been a group playing there for 2 days now. Go to http://www.obriensweb.com/sked/ and select Digitalradio at the top of the page, they're using that to organize things while they experiment.

73
de
KC9ECI


Re: NBEMS-1.0.02 posted

w1hkj <w1hkj@...>
 

I just checked the link on all 4 of my computers and it seems intact. Did you need to refresh your browser?

Dave