Date   
flrig 1.3.46 posted

Dave
 

Posted at www.w1hkj.com/files

and at Source Forge.  Source Forge git repository master branch updated to 1.3.46.

flrig 1.3.46

  Maintenance release, includes following changes from 1.3.45

  ic7200 test
    * add get/set trace statements to test start/stop work flow

  KX3
    * update to KX3 class backend
    * added support for KXPA100 power out query

  FTdx101D
    * add new transceiver class

  auto_on_off
    * change auto on to be first event in transceiver get/set sequence

  FT-450 / FT-450D
    * Comment out 3 second "wait for rig startup "
    * Move auto on before initialize() and check()
      - insures check can return true during initialization.
    * Correct set/get methods for
      - tune
      - preamp
      - attenuator

  IC F8101
    * Add backend for F8101 commercial transceiver
      - for use in Dominic emergency network
    * Change PTT to control audio in, Mic / Aux
    * add correct conversions for volume level
    * Add shutdown sequence:
      - return to memory / scan mode
    * Correct set mode CAT string
    * Add controls:
      - Preamp / attenuator
      - NB on/off
      - Speech processor on/off
      - Noise Reduction on/off
    * Add BW controls - pending resolution of CAT
      command access
    * update Smeter / POmeter mapping

  Split Tune button
    * split tune button into on/off and manual tune
    * add on/off and manual tune methods to:
      - FT1000.cxx, FT2000.cxx, FT450.cxx, FT450D.cxx
      - FT5000.cxx, FT891.cxx, FT950.cxx, FTdx1200.cxx
      - FTdx3000.cxx, FTdx9000.cxx
      - IC703.cxx, IC7100.cxx, IC7200.cxx, IC7300.cxx
      - IC746.cxx, IC756PRO2.cxx, IC756PRO3.cxx, IC7600.cxx
      - IC7610.cxx, IC9100.cxx, K2
      - Kenwood xcvrs with tune capability

  support
    * update to compression, mic gain, and power control
      initialization.  add missing conditional statements

  TS870S
    * Change class to use base class KENWOOD vice rigbase
    * change get/set split to use generic KENWOOD CAT strings
    * add has_rfgain_control, has_ifshift_control

  Read VFO A
    * Fix error in support.cxx

  MacOS high-DPI
    * enable high-DPI on macOS and Microphone on macOS 10.14
      - enable highDPI on retina display
      - request microphone usage on macOS 10.14 (mojave)

  timeops
    * fix for OS-X Xcode < 7.2

  Fix FT-450 split
    * FT-450 doesn't have separate Tx / Rx split commands.
      - changed FR; to FT;


73, David, W1HKJ

Re: Rcvd Msgs

Dave
 

On 7/22/19 10:44 AM, Mike Cohen wrote:
NBEMS Team,
Follow up to my question and your replies:
Checking or unchecking Transfer direct to executing flmsg made no difference.
Uninstalled fldigi 4.1.05 and installed previous versions back 4.1.02 and still no change.
Uninstalled flmsg 4.0.10 and installed previous versions back to 4.0.8 and checking / un-checking made the difference.
Updated fldigi to 4.1.05 and with flmsg 4.0.8, checking / un-checking made the difference.
Using 64 bit Windows 10 Home, Version 1803.
Will stay with flmsg 4.0.8 until cause of issue is resolved.
Thanks, as always, for all your help and guidance.
73,
Mike - AD4MC

Re: Rcvd Msgs

Mike Cohen
 

NBEMS Team,
Follow up to my question and your replies:
Checking or unchecking Transfer direct to executing flmsg made no difference.
Uninstalled fldigi 4.1.05 and installed previous versions back 4.1.02 and still no change.
Uninstalled flmsg 4.0.10 and installed previous versions back to 4.0.8 and checking / un-checking made the difference.
Updated fldigi to 4.1.05 and with flmsg 4.0.8, checking / un-checking made the difference.
Using 64 bit Windows 10 Home, Version 1803.
Will stay with flmsg 4.0.8 until cause of issue is resolved.
Thanks, as always, for all your help and guidance.
73,
Mike - AD4MC

On Wed, Jul 17, 2019 at 11:18 AM Mike Cohen <ad4mc.mike@...> wrote:  
NBEMS Team,

A long time ago there was no Rcvd Msgs popup and new instances of flmsg would open with each received message.  Then Rcvd Msgs was created and all new messages were listed in Rcvd Msgs, but no new instances were opened.  The North Fulton (GA) ARES (NFARES) has members who strongly like one or the other.  With the latest versions of fldigi and flmsg, we cannot find the setting(s) that will enable Rcvd Msgs to populate without opening additional instances of flmsg.  (Yes, we have read the manual, but have missed it if it is there. ;-)  If there is an option to select using Rcvd Msgs without opening separate instances of flmsg, please let us know.

Thanks and 73,
Mike - AD4MC (for NFARES)

2b. 
Re: Rcvd Msgs 
From: Ron
Date: Wed, 17 Jul 2019 12:00:27 EDT 

Mike,

In Fldigi, Configure, Miscellaneous, NBEMS, if you check the box labled Transfer direct to executing flmsg, each flmsg that you receive will appear in a list without opening each one. If you uncheck this box then each Flmsg you receive without errors will open up in a new window.



73, Ron NY3J


 Attachments:
View/Reply Online | Reply To Group | Reply To Sender | Mute Topic | Top ^ | New Topic
2c. 
Re: Rcvd Msgs 
From: Al Womelsdorf
Date: Wed, 17 Jul 2019 15:03:20 EDT 

An interesting wrinkle to this is if you do not check this box, then every (correct) message will open a new instance of flmsg, as Ron states. However, if yo DO have it checked, the the FIRST message received will open one (1) instance of flmsg, and populate it with the message. The second received message will open the Rcvd Msgs window, and enter the message in that window. Further messages will not open any more windows, and will add to the list in Rcvd Msgs. Note that the first message received is not in the list (Rcvd Msgs) at all, so if you view a different message, and then wish to go back to the first message, you are out of luck and have to open a file browser of some kind. If, however, you had manually opened an instance of flmsg before any messages are received, then ALL messages get listed in the Rcvd Msgs window. Also note that for some reason, configuring fldigi to automatically start flmsg (like it does for flamp) does not work (Bug?).

My personal preference would be for fldigi to (optionally) open flmsg, just like flamp, and then all messages will get listed in the Rcvd Msgs window and can be viewed at will.

73,  Al  KD2PNR


Re: Rcvd Msgs

Al Womelsdorf
 

Thanks Dave, it has been a while since I tried it, and as of 4.1.05.04 (at least, if not before) it is working perfectly.

73,
Al  KD2PNR

flmsg alpha 4.0.10.04 posted

Dave
 

Includes following changes from 4.0.10

  Time table
    * Correct Olivia entries in time table to correspond with ADIF naming convention

  fltk-params
    * Change expert dialog to allow resizing
      . using -g WxH+X+Y command line parameter
      . by corner drag resize
      . flmsg remembers position and size between executions, unless the -g parameter is invoked.
    * Scrolling widgets do not resize.  The fltk scroll widget does not resize internal widgets

  fldigi online
    * correct timing for flmsg/fldigi online keep-alive

Confirmed that autostart of flmsg works correctly on Windows-10, Linux and OS-X. 

73, David, W1HKJ


Re: Rcvd Msgs

Mike Cohen
 

Ron, Al and Dave,

Thank you very much for your quick responses.

73,

Mike - AD4MC

Re: Rcvd Msgs

Dave
 

Autostart of flmsg does work correctly.  You must have something configured wrong.



David, W1HKJ

Re: FLMsg Olivia

Dave
 

Confirmed the problem with dropping Olivia from the modem pick table in flmsg.  Corrected and will publish an alpha shortly.

David, W1HKJ

On 7/17/19 12:58 PM, Ron via Groups.Io wrote:
David,

If you have Sync modem to fldigi checked in the Flmsg configuration then it will send it with Olivia 8/500 if you have that selected in Fldigi even though it doesn't show in Flmsg. I just tried it and it will work.

73, Ron NY3J

On 7/17/19 1:51 PM, David Paquette via Groups.Io wrote:
FLMsg no longer gives me the option to send via Olivia 8/500. In bad conditions Olivia will get thru where MSFK will not. Olivia is our backup when band conditions will not allow the faster MFSK32 speed.??


David M. Paquette
989-321-1606


On Wednesday, July 17, 2019, 01:46:52 PM EDT, David Paquette via Groups.Io <sail4fun06@...> wrote:


It does show in FLDigi but not FLMsg...


David M. Paquette
989-321-1606


On Wednesday, July 17, 2019, 10:50:32 AM EDT, Ed W3NR <autek@...> wrote:


On 7/17/19 9:54 AM, David Paquette via Groups.Io wrote:
What happen to Olivia 8/500? it doesn't appear in the selection anymore.

Look under UI > Visible modes

Ed W3NR



Re: Rcvd Msgs

Al Womelsdorf
 

An interesting wrinkle to this is if you do not check this box, then every (correct) message will open a new instance of flmsg, as Ron states. However, if yo DO have it checked, the the FIRST message received will open one (1) instance of flmsg, and populate it with the message. The second received message will open the Rcvd Msgs window, and enter the message in that window. Further messages will not open any more windows, and will add to the list in Rcvd Msgs. Note that the first message received is not in the list (Rcvd Msgs) at all, so if you view a different message, and then wish to go back to the first message, you are out of luck and have to open a file browser of some kind. If, however, you had manually opened an instance of flmsg before any messages are received, then ALL messages get listed in the Rcvd Msgs window. Also note that for some reason, configuring fldigi to automatically start flmsg (like it does for flamp) does not work (Bug?).

My personal preference would be for fldigi to (optionally) open flmsg, just like flamp, and then all messages will get listed in the Rcvd Msgs window and can be viewed at will.

73,  Al  KD2PNR

Re: FLMsg Olivia

Ron
 

David,

If you have Sync modem to fldigi checked in the Flmsg configuration then it will send it with Olivia 8/500 if you have that selected in Fldigi even though it doesn't show in Flmsg. I just tried it and it will work.

73, Ron NY3J

On 7/17/19 1:51 PM, David Paquette via Groups.Io wrote:
FLMsg no longer gives me the option to send via Olivia 8/500. In bad conditions Olivia will get thru where MSFK will not. Olivia is our backup when band conditions will not allow the faster MFSK32 speed.??


David M. Paquette
989-321-1606


On Wednesday, July 17, 2019, 01:46:52 PM EDT, David Paquette via Groups.Io <sail4fun06@...> wrote:


It does show in FLDigi but not FLMsg...


David M. Paquette
989-321-1606


On Wednesday, July 17, 2019, 10:50:32 AM EDT, Ed W3NR <autek@...> wrote:


On 7/17/19 9:54 AM, David Paquette via Groups.Io wrote:
What happen to Olivia 8/500? it doesn't appear in the selection anymore.

Look under UI > Visible modes

Ed W3NR


Re: FLMsg Olivia

David Paquette
 

FLMsg no longer gives me the option to send via Olivia 8/500. In bad conditions Olivia will get thru where MSFK will not. Olivia is our backup when band conditions will not allow the faster MFSK32 speed. 


David M. Paquette
989-321-1606


On Wednesday, July 17, 2019, 01:46:52 PM EDT, David Paquette via Groups.Io <sail4fun06@...> wrote:


It does show in FLDigi but not FLMsg...


David M. Paquette
989-321-1606


On Wednesday, July 17, 2019, 10:50:32 AM EDT, Ed W3NR <autek@...> wrote:


On 7/17/19 9:54 AM, David Paquette via Groups.Io wrote:
What happen to Olivia 8/500? it doesn't appear in the selection anymore.

Look under UI > Visible modes

Ed W3NR

Re: FLMsg Olivia

David Paquette
 

It does show in FLDigi but not FLMsg...


David M. Paquette
989-321-1606


On Wednesday, July 17, 2019, 10:50:32 AM EDT, Ed W3NR <autek@...> wrote:


On 7/17/19 9:54 AM, David Paquette via Groups.Io wrote:
What happen to Olivia 8/500? it doesn't appear in the selection anymore.

Look under UI > Visible modes

Ed W3NR

Re: Rcvd Msgs

Ron
 

Mike,

In Fldigi, Configure, Miscellaneous, NBEMS, if you check the box labled Transfer direct to executing flmsg, each flmsg that you receive will appear in a list without opening each one. If you uncheck this box then each Flmsg you receive without errors will open up in a new window.



73, Ron NY3J


On 7/17/19 11:18 AM, Mike Cohen wrote:
NBEMS Team,

A long time ago there was no Rcvd Msgs popup and new instances of flmsg would open with each received message.?? Then Rcvd Msgs was created and all new messages were listed in Rcvd Msgs, but no new instances were opened.?? The North Fulton (GA) ARES (NFARES) has members who strongly like one or the other.?? With the latest versions of fldigi and flmsg, we cannot find the setting(s) that will enable Rcvd Msgs to populate without opening additional instances of flmsg.?? (Yes, we have read the manual, but have missed it if it is there. ;-)?? If there is an option to select using Rcvd Msgs without opening separate instances of flmsg, please let us know.

Thanks and 73,
Mike - AD4MC (for NFARES)

Re: FLMsg Olivia

Gilbert Kauffmann
 

Olivia used to be the best mode for us years ago..However, it seems that it has been replaced 
in PA...  We tried many modes under different conditions and Olivia always was a best mode...   K3CC



-----Original Message-----
From: Bruce Bohannon WA1YZN <ham.bo@...>
To: nbems <nbems@groups.io>
Sent: Wed, Jul 17, 2019 10:42 am
Subject: Re: [nbems] FLMsg Olivia

Hello, it is still in my version 4.1.04.11 and it works.


Bruce WA1YZN

On 7/17/2019 9:54 AM, David Paquette via Groups.Io wrote:
What happen to Olivia 8/500? it doesn't appear in the selection anymore.

Rcvd Msgs

Mike Cohen
 

NBEMS Team,

A long time ago there was no Rcvd Msgs popup and new instances of flmsg would open with each received message.  Then Rcvd Msgs was created and all new messages were listed in Rcvd Msgs, but no new instances were opened.  The North Fulton (GA) ARES (NFARES) has members who strongly like one or the other.  With the latest versions of fldigi and flmsg, we cannot find the setting(s) that will enable Rcvd Msgs to populate without opening additional instances of flmsg.  (Yes, we have read the manual, but have missed it if it is there. ;-)  If there is an option to select using Rcvd Msgs without opening separate instances of flmsg, please let us know.

Thanks and 73,
Mike - AD4MC (for NFARES)

Re: FLMsg Olivia

Ed W3NR
 

On 7/17/19 9:54 AM, David Paquette via Groups.Io wrote:
What happen to Olivia 8/500? it doesn't appear in the selection anymore.

Look under UI > Visible modes

Ed W3NR

Re: FLMsg Olivia

Bruce Bohannon WA1YZN
 

Hello, it is still in my version 4.1.04.11 and it works.


Bruce WA1YZN

On 7/17/2019 9:54 AM, David Paquette via Groups.Io wrote:
What happen to Olivia 8/500? it doesn't appear in the selection anymore.

FLMsg Olivia

David Paquette
 

What happen to Olivia 8/500? it doesn't appear in the selection anymore.

Re: FLMSG Default File Name: ICS 213 form - Response function

Ole Helgerson KI7MBR
 

Hi Sarah,

For what its worth, the other day I transmitted a test ICS 213 from my ht (Easy Digi + Android phone) to the Alinco mobile (audio connection, Samsung tablet perched atop the radio).  The message showed up on the tablet.

A response was added and it was then transmitted back to the ht.  It came through ok.

The return file _did_ have a different file name;  "Copy_of_KI7MBR...." indicating a reply.  This is based on the "SENT" file list in the Samsung.  I deleted the received file on the phone  (ooops).

Hope this is helpful.  73 KI7MBR Ole


On Thu, Jul 11, 2019 at 8:11 PM Randy <rpratt@...> wrote:

If his windows 10 works like mine that is the answer.  There is anyone’s guess what will be pasted, added, or changed and when or where it will appear.

 

Sent from Mail for Windows 10

 

From: Sarah
Sent: Thursday, July 11, 2019 6:23 PM
To: nbems@groups.io
Subject: [nbems] FLMSG Default File Name: ICS 213 form - Response function

 

Greetings FLMSG / NBEMS users:  I'm perplexed by something that happened in a recent NBEMS net and hope someone can explain what happened.

Original Message:  sent on a standard FLMSG ICS 213 form, asked net participants to use the "Response" function on the form to provide information as a drill.  Participants were instructed to rename the FLMSG file containing their response, (i.e.,click on the Response tab of the form, type a response, give the file a new name then send it to the net.)

Reply Message:  One of the participants isn't sure what he did to save or name the file he transmitted in response.  The file he transmitted came through with the file name:  [his call sign][date][time].213reply

Please note the word 'reply' added to the file name extension.
How did this happen?  The operator swears he didn't manually type in the word reply.  I caught it and asked him immediately after he transmitted the message.  However I cannot replicate this ('reply' being added to file extension) in tests sending messages back and forth between two computers.  Any ideas any of you have would be welcome!

 

Re: Problem with nanoIO in fldigi ver4.1.05

Vlad Boyko
 

Thank you.
Let me know, if you need testing.


On Wed, Jul 10, 2019 at 12:00 PM Dave <w1hkj@...> wrote:
Hello Vlad,

Sorry to take a few days in reply.  The Arduino build system was the last to be installed on my new development machine.

The PTT control on the nanoCW configuration page does not alter the PTT signal on the interface board, just the CAT command for PTT.  I can change that behavior.

I am investigating the keyer Iambic-A/B disconnect.

David

On 7/4/19 10:20 PM, Vlad Boyko wrote:
Hi there,
I installed fldigi ver4.1.05 on Ubuntu 19.04.
Everything is working fine, except some problems with nanoCW modem.
feature "disable PTT" is not working
It is impossible to change keyer type. Only default lambic-A is working.
Is it any external settings to make it work, or it is valid bug?

Thank you

Vlad, de W6BVB