Date   
Re: Problem with FLDIGI Input.

Dave
 

Ed,

You can try this alpha version of fldigi, 4.1.02.44 posted at http://www.w1hkj.com/alpha/fldigi/

The pop-up message dialogs do not capture keyboard activity in this version.

David

Re: WHERE CAN I DOWNLOAD FLDIGI 4.1.02.27 WX FIX VERSION

kerry
 

Hi Ed,  I assumed this was a newer version as the WX feature that was lost works on this version.  Is there a newer version that the wx feature works on...…...Kerry 

latest version fldigi with wx fix

kerry
 

Hello, WA2NAN here.  I'm looking for the latest fldigi version available with the wx fix.  The latest at source forge does not have the fix.  Where can I download the latest working version?....tnx….Kerry-WA2NAN

Re: WHERE CAN I DOWNLOAD FLDIGI 4.1.02.27 WX FIX VERSION

Ed W3NR
 

On 4/10/19 8:51 AM, kerry wrote:
Hi Ed,  I assumed this was a newer version as the WX feature that was lost works on this version.  Is there a newer version that the wx feature works on...…...Kerry 
_._,_._,_


http://www.w1hkj.com/alpha/fldigi/

Ed W3NR

OS X install dmg's for G4 motorola processor #build

Dave
 

The results of the poll of users on Apple OS-X computers is closed.  Only one person responded as still using the G4 dmg distributions, but with the ability to compile from source.  I expect to release updates to fldigi, flrig and fllog this weekend, but without a G4 dmg.   This will save me several hours in release preparation.  I will still entertain special requests to build specific programs for the G4 target machine.

73, David, W1HKJ

Re: FLAMP New feature idea - maybe

Aaron Jones
 

has anyone played around with FSQ in FLDIG?  It has some options for directed messaging and "allcall" broadcast messaging, ironically I'd say "similar to JS8Call" but it's clear JS8 call modeled itself after FSQCall which was also integrated or functionally adopted into FLDIGI.  I'd love to see that FSQ op mode allow variations in OPmode but with the same "directed" and "non-directed" messaging.  Add in some integration to FLAMP or FLMSG and you are getting pretty close to some store and forward capabilities. 

Any thoughts along those lines since the previous posts in this thread?

Re: FLAMP New feature idea - maybe

AD5XJ, KEN
 

aaron

See my post from Mar 30.

New postings for fldigi, flrig and fllog

Dave
 

Please review the readme.txt file associated with each program.

The links below are for direct access to the W1HKJ download pages.

The Source Forge files pages have also been updated.


FLDIGI:
FLRIG:

FLLOG:


Direct access is also available to other W1HKJ programs using these URL links:


Report any download problems, or program issues back to this forum.

Note that a ppc.dmg has not been created for this update.  Users needing an OS-X disc image file for the Motorola G4 processor will have to request the same from me at my return address.

73, David, W1HKJ



CW Interface

Robie
 

All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F

Re: CW Interface

Lee Garner
 

Hi Robby, at hamprojects.info. not a secure site.
Mortty is a Do-It-Yourself construction project that provides a miniature enclosure and a computing platform for K0SM’s TinyFSK RTTY Keyer software or K3NG’s CW Keyer software. It optionally can be configured to run W1HKJ’s nanoIO software using fldigi.  


On Sat, Apr 13, 2019 at 10:07 AM Robie <ruler55@...> wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)

Re: CW Interface

Lee Garner
 

I mean....Robie


On Sat, Apr 13, 2019 at 10:16 AM Lee Garner via Groups.Io <Wa0uig=gmail.com@groups.io> wrote:
Hi Robby, at hamprojects.info. not a secure site.
Mortty is a Do-It-Yourself construction project that provides a miniature enclosure and a computing platform for K0SM’s TinyFSK RTTY Keyer software or K3NG’s CW Keyer software. It optionally can be configured to run W1HKJ’s nanoIO software using fldigi.  

On Sat, Apr 13, 2019 at 10:07 AM Robie <ruler55@...> wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)

Re: CW Interface

Ed W3NR
 

On 4/13/19 11:06 AM, Robie wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F
_._,_._,_


http://www.w1hkj.com/FldigiHelp/nanoIO_page.html

I tested this using the nanoIO

Ed W3NR

Re: CW Interface

Robie
 

Lee,

Thanks for the feedback.  Yes, I'm aware of the info you provided.  I have an assembled MORTTY that is loaded with the sketch that emulates WinKeyer.  It works with FLDIGI, but only if I manually reassign the port to which the mortty is connected and reconnect it each time I start FLDIGI.  Is this expected behavior with this sketch installed?

I could modify the MORTTY (small physical change required to support nanoIo) and install the nanoio sketch.  However, I'm not interested in that approach at this time.

Robie-AJ4F

On Sat, Apr 13, 2019 at 3:28 PM Lee Garner <Wa0uig@...> wrote:
I mean....Robie

On Sat, Apr 13, 2019 at 10:16 AM Lee Garner via Groups.Io <Wa0uig=gmail.com@groups.io> wrote:
Hi Robby, at hamprojects.info. not a secure site.
Mortty is a Do-It-Yourself construction project that provides a miniature enclosure and a computing platform for K0SM’s TinyFSK RTTY Keyer software or K3NG’s CW Keyer software. It optionally can be configured to run W1HKJ’s nanoIO software using fldigi.  

On Sat, Apr 13, 2019 at 10:07 AM Robie <ruler55@...> wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)

Re: CW Interface

Lee Garner
 

So it works with FLDIGI, but won't load the correct audio port on FLDIGI boot?


On Sat, Apr 13, 2019 at 11:02 AM Robie <ruler55@...> wrote:
Lee,

Thanks for the feedback.  Yes, I'm aware of the info you provided.  I have an assembled MORTTY that is loaded with the sketch that emulates WinKeyer.  It works with FLDIGI, but only if I manually reassign the port to which the mortty is connected and reconnect it each time I start FLDIGI.  Is this expected behavior with this sketch installed?

I could modify the MORTTY (small physical change required to support nanoIo) and install the nanoio sketch.  However, I'm not interested in that approach at this time.

Robie-AJ4F

On Sat, Apr 13, 2019 at 3:28 PM Lee Garner <Wa0uig@...> wrote:
I mean....Robie

On Sat, Apr 13, 2019 at 10:16 AM Lee Garner via Groups.Io <Wa0uig=gmail.com@groups.io> wrote:
Hi Robby, at hamprojects.info. not a secure site.
Mortty is a Do-It-Yourself construction project that provides a miniature enclosure and a computing platform for K0SM’s TinyFSK RTTY Keyer software or K3NG’s CW Keyer software. It optionally can be configured to run W1HKJ’s nanoIO software using fldigi.  

On Sat, Apr 13, 2019 at 10:07 AM Robie <ruler55@...> wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)

Re: CW Interface

Robie
 

Lee,

Not the audio port, the virtual serial port (USB connection).

Robie -  AJ4F

On Sat, Apr 13, 2019 at 4:09 PM Lee Garner <Wa0uig@...> wrote:
So it works with FLDIGI, but won't load the correct audio port on FLDIGI boot?

On Sat, Apr 13, 2019 at 11:02 AM Robie <ruler55@...> wrote:
Lee,

Thanks for the feedback.  Yes, I'm aware of the info you provided.  I have an assembled MORTTY that is loaded with the sketch that emulates WinKeyer.  It works with FLDIGI, but only if I manually reassign the port to which the mortty is connected and reconnect it each time I start FLDIGI.  Is this expected behavior with this sketch installed?

I could modify the MORTTY (small physical change required to support nanoIo) and install the nanoio sketch.  However, I'm not interested in that approach at this time.

Robie-AJ4F

On Sat, Apr 13, 2019 at 3:28 PM Lee Garner <Wa0uig@...> wrote:
I mean....Robie

On Sat, Apr 13, 2019 at 10:16 AM Lee Garner via Groups.Io <Wa0uig=gmail.com@groups.io> wrote:
Hi Robby, at hamprojects.info. not a secure site.
Mortty is a Do-It-Yourself construction project that provides a miniature enclosure and a computing platform for K0SM’s TinyFSK RTTY Keyer software or K3NG’s CW Keyer software. It optionally can be configured to run W1HKJ’s nanoIO software using fldigi.  

On Sat, Apr 13, 2019 at 10:07 AM Robie <ruler55@...> wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)

Re: CW Interface

Lee Garner
 

Ok, good info. It's the virtual USB/Serial interface - recognized and accessed but does not stay selected in the GUI.


On Sat, Apr 13, 2019 at 12:59 PM Robie <ruler55@...> wrote:
Lee,

Not the audio port, the virtual serial port (USB connection).

Robie -  AJ4F

On Sat, Apr 13, 2019 at 4:09 PM Lee Garner <Wa0uig@...> wrote:
So it works with FLDIGI, but won't load the correct audio port on FLDIGI boot?

On Sat, Apr 13, 2019 at 11:02 AM Robie <ruler55@...> wrote:
Lee,

Thanks for the feedback.  Yes, I'm aware of the info you provided.  I have an assembled MORTTY that is loaded with the sketch that emulates WinKeyer.  It works with FLDIGI, but only if I manually reassign the port to which the mortty is connected and reconnect it each time I start FLDIGI.  Is this expected behavior with this sketch installed?

I could modify the MORTTY (small physical change required to support nanoIo) and install the nanoio sketch.  However, I'm not interested in that approach at this time.

Robie-AJ4F

On Sat, Apr 13, 2019 at 3:28 PM Lee Garner <Wa0uig@...> wrote:
I mean....Robie

On Sat, Apr 13, 2019 at 10:16 AM Lee Garner via Groups.Io <Wa0uig=gmail.com@groups.io> wrote:
Hi Robby, at hamprojects.info. not a secure site.
Mortty is a Do-It-Yourself construction project that provides a miniature enclosure and a computing platform for K0SM’s TinyFSK RTTY Keyer software or K3NG’s CW Keyer software. It optionally can be configured to run W1HKJ’s nanoIO software using fldigi.  

On Sat, Apr 13, 2019 at 10:07 AM Robie <ruler55@...> wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)

Re: CW Interface

Robie
 

Correct!

Robie - AJ4F

On Sat, Apr 13, 2019 at 6:15 PM Lee Garner <Wa0uig@...> wrote:
Ok, good info. It's the virtual USB/Serial interface - recognized and accessed but does not stay selected in the GUI.

On Sat, Apr 13, 2019 at 12:59 PM Robie <ruler55@...> wrote:
Lee,

Not the audio port, the virtual serial port (USB connection).

Robie -  AJ4F

On Sat, Apr 13, 2019 at 4:09 PM Lee Garner <Wa0uig@...> wrote:
So it works with FLDIGI, but won't load the correct audio port on FLDIGI boot?

On Sat, Apr 13, 2019 at 11:02 AM Robie <ruler55@...> wrote:
Lee,

Thanks for the feedback.  Yes, I'm aware of the info you provided.  I have an assembled MORTTY that is loaded with the sketch that emulates WinKeyer.  It works with FLDIGI, but only if I manually reassign the port to which the mortty is connected and reconnect it each time I start FLDIGI.  Is this expected behavior with this sketch installed?

I could modify the MORTTY (small physical change required to support nanoIo) and install the nanoio sketch.  However, I'm not interested in that approach at this time.

Robie-AJ4F

On Sat, Apr 13, 2019 at 3:28 PM Lee Garner <Wa0uig@...> wrote:
I mean....Robie

On Sat, Apr 13, 2019 at 10:16 AM Lee Garner via Groups.Io <Wa0uig=gmail.com@groups.io> wrote:
Hi Robby, at hamprojects.info. not a secure site.
Mortty is a Do-It-Yourself construction project that provides a miniature enclosure and a computing platform for K0SM’s TinyFSK RTTY Keyer software or K3NG’s CW Keyer software. It optionally can be configured to run W1HKJ’s nanoIO software using fldigi.  

On Sat, Apr 13, 2019 at 10:07 AM Robie <ruler55@...> wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)

Re: CW Interface

Lee Garner
 

Ok! Are you FLDigi Windows based? and tell us what you have tried so far.


On Sat, Apr 13, 2019 at 1:17 PM Robie <ruler55@...> wrote:
Correct!

Robie - AJ4F

On Sat, Apr 13, 2019 at 6:15 PM Lee Garner <Wa0uig@...> wrote:
Ok, good info. It's the virtual USB/Serial interface - recognized and accessed but does not stay selected in the GUI.

On Sat, Apr 13, 2019 at 12:59 PM Robie <ruler55@...> wrote:
Lee,

Not the audio port, the virtual serial port (USB connection).

Robie -  AJ4F

On Sat, Apr 13, 2019 at 4:09 PM Lee Garner <Wa0uig@...> wrote:
So it works with FLDIGI, but won't load the correct audio port on FLDIGI boot?

On Sat, Apr 13, 2019 at 11:02 AM Robie <ruler55@...> wrote:
Lee,

Thanks for the feedback.  Yes, I'm aware of the info you provided.  I have an assembled MORTTY that is loaded with the sketch that emulates WinKeyer.  It works with FLDIGI, but only if I manually reassign the port to which the mortty is connected and reconnect it each time I start FLDIGI.  Is this expected behavior with this sketch installed?

I could modify the MORTTY (small physical change required to support nanoIo) and install the nanoio sketch.  However, I'm not interested in that approach at this time.

Robie-AJ4F

On Sat, Apr 13, 2019 at 3:28 PM Lee Garner <Wa0uig@...> wrote:
I mean....Robie

On Sat, Apr 13, 2019 at 10:16 AM Lee Garner via Groups.Io <Wa0uig=gmail.com@groups.io> wrote:
Hi Robby, at hamprojects.info. not a secure site.
Mortty is a Do-It-Yourself construction project that provides a miniature enclosure and a computing platform for K0SM’s TinyFSK RTTY Keyer software or K3NG’s CW Keyer software. It optionally can be configured to run W1HKJ’s nanoIO software using fldigi.  

On Sat, Apr 13, 2019 at 10:07 AM Robie <ruler55@...> wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)

Re: CW Interface

Robie
 

Lee,

Here's some info that will help you understand what I'm doing and what is happening:

1. I use windows 10 operating system.
2. I use N1MM + for contesting and DXLabs as my master logging program
3. I use a WinKeyer for my logging program to rig CW interface - all programs
4. I built a MORTTY to evaluate as a possible replacement for the winkeyer due to its small size and lower cost. I have successfully used it with N1MM+ and DXLabs
5. The "sketch" that is loaded into my MORTTY is a "winkeyer emulator" as I understand. It is named CW Keyer sketch on the MORTTY web page.
6, N1MM+ and DXLabs recognize the MORTTY as a "winkeyer" and work well
7. I am evaluating FLDIGI (4.0.02) as a possible program to put in my "tool kit" of ham radio software. I saw that FLDIGI will connect to a winkeyer, so I figured that it would recognize my MORTTY like the other programs do, so I tried it. and have some issues.
8. With FLDIGI configured for winkeyer on COM 3, I get the following on startup of the program
image.png

9. I close the window that shows this message and  open configure/operating/winkeyer and find that the port has been set to NONE

10. I change NONE to COM 3, press connect and  close

11. the MORTTY responds properly and sends CW correctly. Macros, keyboard CW and speed control all work properly.

12.  I have to repeat steps 8-11 each time I open FLDIGI.

Please let me know if you have any questions,

Robie - AJ4F


On Sun, Apr 14, 2019 at 7:24 AM Lee Garner <Wa0uig@...> wrote:
Ok! Are you FLDigi Windows based? and tell us what you have tried so far.

On Sat, Apr 13, 2019 at 1:17 PM Robie <ruler55@...> wrote:
Correct!

Robie - AJ4F

On Sat, Apr 13, 2019 at 6:15 PM Lee Garner <Wa0uig@...> wrote:
Ok, good info. It's the virtual USB/Serial interface - recognized and accessed but does not stay selected in the GUI.

On Sat, Apr 13, 2019 at 12:59 PM Robie <ruler55@...> wrote:
Lee,

Not the audio port, the virtual serial port (USB connection).

Robie -  AJ4F

On Sat, Apr 13, 2019 at 4:09 PM Lee Garner <Wa0uig@...> wrote:
So it works with FLDIGI, but won't load the correct audio port on FLDIGI boot?

On Sat, Apr 13, 2019 at 11:02 AM Robie <ruler55@...> wrote:
Lee,

Thanks for the feedback.  Yes, I'm aware of the info you provided.  I have an assembled MORTTY that is loaded with the sketch that emulates WinKeyer.  It works with FLDIGI, but only if I manually reassign the port to which the mortty is connected and reconnect it each time I start FLDIGI.  Is this expected behavior with this sketch installed?

I could modify the MORTTY (small physical change required to support nanoIo) and install the nanoio sketch.  However, I'm not interested in that approach at this time.

Robie-AJ4F

On Sat, Apr 13, 2019 at 3:28 PM Lee Garner <Wa0uig@...> wrote:
I mean....Robie

On Sat, Apr 13, 2019 at 10:16 AM Lee Garner via Groups.Io <Wa0uig=gmail.com@groups.io> wrote:
Hi Robby, at hamprojects.info. not a secure site.
Mortty is a Do-It-Yourself construction project that provides a miniature enclosure and a computing platform for K0SM’s TinyFSK RTTY Keyer software or K3NG’s CW Keyer software. It optionally can be configured to run W1HKJ’s nanoIO software using fldigi.  

On Sat, Apr 13, 2019 at 10:07 AM Robie <ruler55@...> wrote:
All,

I'm a new user and would like to know it if FLDIGI supports the MORTTY device for a CW interface?

Robie - AJ4F



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)



--
Lelia Garner |  WA0UIG
ARRL IA Section Manager
ARRL IA Section Traffic Manager
Net Manager Iowa Traffic and Emergency Net (ITEN)
3970 kHz Sunday 2300 UTC (6 PM CDT)
wa0uig@...
319-213-3539 (c)

Re: CW Interface

Dave
 

The sketch is not completely emulating the WinKeyer.  It should echo the sent data string.

This is the auto startup exchange between fldigi 4.1.02 and a real WinKeyer (version 3.1):

I: WKCW_connect: WKCW_connect(ON)
I: close_wkeyer: WKEY RESET :  0x00 0x01
I: close_wkeyer: HOST CLOSE :  0x00 0x03
I: WK_start_wkey_serial:
Serial port:
  Port     : /dev/cu.usbserial-A600e2pL
  Baud     : 1200
  Stopbits : 2
  Timeout  : 1
  DTR      : true
  RTS/CTS  : false
I: open_wkeyer: NULL_CMD :  0x13 0x13 0x13
I: WK_sendString: Sent 2: 00 01
I: WK_sendString: Sent 3: 13 13 13
I: open_wkeyer: ECHO_TEST :  0x00 0x04 0x55
I: WK_sendString: Sent 3: 00 04 55
I: WK_echo_test: passed echo test
I: open_wkeyer: Echo response in 38 msec
I: open_wkeyer: HOST_OPEN :  0x00 0x02
I: WK_sendString: Sent 2: 00 02
I: load_defaults:
      mode register .... c4
      CW speed ......... 24
      side tone ........ 6
      weight ........... 50
      lead in time ..... 0
      tail time ........ 0
      min wpm .......... 10
      rng wpm .......... 25
      first ext ........ 0
      key comp ......... 0
      farnsworth wpm ... 0
      paddle setpoint .. 50
      dit dah ratio .... 50
      pin config ....... 4
      don't care ....... 255
      hex string .......  0x0f 0xc4 0x18 0x06 0x32 0x00 0x00 0x0a 0x19 0x00 0x00 0x00 0x32 0x32 0x04 0xff
I: WK_sendString: Sent 16: 0F C4 18 06 32 00 00 0A 19 00 00 00 32 32 04 FF
I: load_defaults: SET_SPEED_POT :  0x05 0x0a 0x19 0xff
I: WK_sendString: Sent 4: 05 0A 19 FF
I: load_defaults: SETWPM 24 :  0x02 0x18
I: WK_sendString: Sent 2: 02 18
I: load_defaults:
      mode register .... c4
      CW speed ......... 24
      side tone ........ 6
      weight ........... 50
      lead in time ..... 0
      tail time ........ 0
      min wpm .......... 10
      rng wpm .......... 25
      first ext ........ 0
      key comp ......... 0
      farnsworth wpm ... 0
      paddle setpoint .. 50
      dit dah ratio .... 50
      pin config ....... 4
      don't care ....... 255
      hex string .......  0x0f 0xc4 0x18 0x06 0x32 0x00 0x00 0x0a 0x19 0x00 0x00 0x00 0x32 0x32 0x04 0xff
I: WK_sendString: Sent 16: 0F C4 18 06 32 00 00 0A 19 00 00 00 32 32 04 FF
I: load_defaults: SET_SPEED_POT :  0x05 0x0a 0x19 0xff
I: WK_sendString: Sent 4: 05 0A 19 FF
I: load_defaults: SETWPM 24 :  0x02 0x18
I: WK_sendString: Sent 2: 02 18
I: WKCW_init: GET_SPEED_POT :  0x07
I: WK_sendString: Sent 1: 07
I: WKCW_init: SET_WPM 24 :  0x02 0x18
I: WK_sendString: Sent 2: 02 18
I: WKCW_init: SET_SPEED_POT :  0x05 0x0a 0x19 0xff
I: WK_sendString: Sent 4: 05 0A 19 FF
I: WKCW_init: GET_SPEED_POT :  0x07
I: WK_sendString: Sent 1: 07

73, David, W1HKJ