|
Quisk Version 4.2.0 May 2022 2 messages
I added a patch from Jaroslav, OK2JRQ, to improve compatibility with Hamlib. I removed the Python function set_transmit_mode() because it seems to be unused. I fixed a lockup problem that happens when
I added a patch from Jaroslav, OK2JRQ, to improve compatibility with Hamlib. I removed the Python function set_transmit_mode() because it seems to be unused. I fixed a lockup problem that happens when
|
By
jimahlstrom
·
|
|
ALSA Problems.... 3 messages
Hi Jim, et. al., I am finding that pulseaudio is messing up the sound card data before it gets to quisk. I have verified this using gnuradio, and quisk. The issue is if I pick 96 kHz pulseaudio seems
Hi Jim, et. al., I am finding that pulseaudio is messing up the sound card data before it gets to quisk. I have verified this using gnuradio, and quisk. The issue is if I pick 96 kHz pulseaudio seems
|
By
Rob Frohne (KL7NA)
·
|
|
Quisk Version 4.1.96 May 2022 16 messages
These changes were suggested by Neil, G4BRK. I fixed the bug that touching the CW key in SSB mode locked up Quisk in transmit mode. All the Record/Play file names on the Config/Config screen were alre
These changes were suggested by Neil, G4BRK. I fixed the bug that touching the CW key in SSB mode locked up Quisk in transmit mode. All the Record/Play file names on the Config/Config screen were alre
|
By
jimahlstrom
·
|
|
No Sampling offset evident in the C-Media Electronics Inc. USB sound card with USB ID 0043
Well, my sound card seems fine. See the plot below and the gnuradio layout that generated it. at 48 kHz sample rate. I fed mono output of the built-in audio to the stereo input of the card I was testi
Well, my sound card seems fine. See the plot below and the gnuradio layout that generated it. at 48 kHz sample rate. I fed mono output of the built-in audio to the stereo input of the card I was testi
|
By
Rob Frohne (KL7NA)
·
|
|
Quisk Hamlib answer zero as frequency when asked using rigctl 31 messages
I run Quisk 4.1.93 on Windows 10 to control a HL2 and are trying to get JS8Call 2.2.0 to work with Quisk and Hamlib 4.4. I should admit I'm a completely newbie when it comes to Hamlib. I think it is a
I run Quisk 4.1.93 on Windows 10 to control a HL2 and are trying to get JS8Call 2.2.0 to work with Quisk and Hamlib 4.4. I should admit I'm a completely newbie when it comes to Hamlib. I think it is a
|
By
Björn (SM0SBL)
·
|
|
DSP Options for Audio IF SDR Receivers 4 messages
Hi Jim, et. al, Are there options in quisk for the following? Magnitude and phase I/Q adjustments that work as a function of frequency te to provide a different correction for -fs/2<f<fs/2, or is it f
Hi Jim, et. al, Are there options in quisk for the following? Magnitude and phase I/Q adjustments that work as a function of frequency te to provide a different correction for -fs/2<f<fs/2, or is it f
|
By
Rob Frohne (KL7NA)
·
|
|
Quisk command line arguments? 3 messages
Hi, Is there a command line argument for quisk that would force quisk to allow you to pick the radio file? I should fix my radio file, but I have one that communicates over serial, and if there is no
Hi, Is there a command line argument for quisk that would force quisk to allow you to pick the radio file? I should fix my radio file, but I have one that communicates over serial, and if there is no
|
By
Rob Frohne (KL7NA)
·
|
|
Quisk with Ubuntu 22.04 4 messages
Hi Guys, I installed quisk with $ python -m pip install --upgrade quisk and it installed okay, but I get these problems with widgets and the guy doesn't draw correctly. Traceback (most recent call las
Hi Guys, I installed quisk with $ python -m pip install --upgrade quisk and it installed okay, but I get these problems with widgets and the guy doesn't draw correctly. Traceback (most recent call las
|
By
Rob Frohne (KL7NA)
·
|
|
Some observations when contesting using Quisk 7 messages
Hi All, I've been enjoying using and HL2 and Quisk driving my transverter stack in the 70cm to 3cm + contest in Europe this weekend.My normal rig is a K3 and the Quisk/HL2 combination has a few operat
Hi All, I've been enjoying using and HL2 and Quisk driving my transverter stack in the 70cm to 3cm + contest in Europe this weekend.My normal rig is a K3 and the Quisk/HL2 combination has a few operat
|
By
neil whiting
·
|
|
Problems of connection with Hermes Lite 2 11 messages
I have been using for some months without problem Quisk with my Hermes Lite 2 directly connected by an ethernet cable to my computer. A few days ago both failed to connect. I tried to connect HL2 to S
I have been using for some months without problem Quisk with my Hermes Lite 2 directly connected by an ethernet cable to my computer. A few days ago both failed to connect. I tried to connect HL2 to S
|
By
Pierre FK8IH
·
|
|
Quisk Version 4.1.95 May 2022
This is a minor release to fix a Midi issue. There is now a separate item on the radio Keys screen to control the Midi PTT toggle. I started to add support for my IO Board. But since the IO board is n
This is a minor release to fix a Midi issue. There is now a separate item on the radio Keys screen to control the Midi PTT toggle. I started to add support for my IO Board. But since the IO board is n
|
By
jimahlstrom
·
|
|
Anyone using OS X and quisk? 9 messages
Hi All, Fifteen or twenty years ago when OS X was rather new I used to use quisk on OS X. Now I've switched to Linux, but I have some students who are using OS X. We are building sound card SDRs and i
Hi All, Fifteen or twenty years ago when OS X was rather new I used to use quisk on OS X. Now I've switched to Linux, but I have some students who are using OS X. We are building sound card SDRs and i
|
By
Rob Frohne (KL7NA)
·
|
|
Adding P25 TX & RX to Quisk 9 messages
Hi Jim If you fancy including it, I've had a bit of fun integrating P25 phase 1 TX & RX to quisk. Attached a document that explains what I have done and a zip file with the code in it. The receive is
Hi Jim If you fancy including it, I've had a bit of fun integrating P25 phase 1 TX & RX to quisk. Attached a document that explains what I have done and a zip file with the code in it. The receive is
|
By
dave.roberts@...
·
|
|
Quisk Version 4.1.94 April 2022 8 messages
This is a minor release to fix some Midi issues. The Config/Keys "PTT key toggle" item now controls the Midi PTT control as well as the hot key PTT. That is, it controls whether the Midi button must b
This is a minor release to fix some Midi issues. The Config/Keys "PTT key toggle" item now controls the Midi PTT control as well as the hot key PTT. That is, it controls whether the Midi button must b
|
By
jimahlstrom
·
|
|
audio distortion in 4.1.94 if NR is enabled 3 messages
hi, First of all I have to say that QUISK is far my favorite software for the Hermes Lite 2. Great audio, easy to operate. But, from version 4.1.94 the audio is terrible as soon I enable NR. Even if I
hi, First of all I have to say that QUISK is far my favorite software for the Hermes Lite 2. Great audio, easy to operate. But, from version 4.1.94 the audio is terrible as soon I enable NR. Even if I
|
By
Gerrit
·
|
|
Quisk Version 4.1.88 October 2021 5 messages
This version makes digital programs like WSJT-X easier to use. There is a button on the Config/Config screen to start WSJT-X. The default is "Never". Select "On startup" to start WSJT-X when Quisk sta
This version makes digital programs like WSJT-X easier to use. There is a button on the Config/Config screen to start WSJT-X. The default is "Never". Select "On startup" to start WSJT-X when Quisk sta
|
By
jimahlstrom
·
|
|
S-Meter calibration 7 messages
Hello, I am using QUISK 4.1.93 on a Raspberry PI with an RS-HFIQ SDR, which is a Softrock like design, using a Behringer UCA202 audio interface. I am struggling to calibrate the Signal level / S-Meter
Hello, I am using QUISK 4.1.93 on a Raspberry PI with an RS-HFIQ SDR, which is a Softrock like design, using a Behringer UCA202 audio interface. I am struggling to calibrate the Signal level / S-Meter
|
By
Joerg DB2OO
·
|
|
Adding a new kind of radio transceiver 11 messages
Hi, I'm the designer of a new transceiver module for the raspberry pi called "RadioHat". I've got some preliminary information about it including gerbers, documentations, schematics and test software
Hi, I'm the designer of a new transceiver module for the raspberry pi called "RadioHat". I've got some preliminary information about it including gerbers, documentations, schematics and test software
|
By
Mario Vano
·
|
|
Quisk conf.py Si570 QRP2000 6 messages
Hello everybody, I need to modify the .quisk_conf.py file in order to control the Si570BBB of my QRP2000 generator by sdr-kits.net https://www.sdr-kits.net/QRP2000-kits I want to use the QRP2000 gener
Hello everybody, I need to modify the .quisk_conf.py file in order to control the Si570BBB of my QRP2000 generator by sdr-kits.net https://www.sdr-kits.net/QRP2000-kits I want to use the QRP2000 gener
|
By
Iz Oos
·
|
|
HIFIBerry adc+dac with Quisk
Anyone try the hifiberry adc+dac with Quisk? thanks Tom AE5NF
Anyone try the hifiberry adc+dac with Quisk? thanks Tom AE5NF
|
By
Tom Flynn
·
|