Hi Patrick, Andrea, and Mike, I have been successful in getting the RSP - Multipsk link to operate in the I/Q mode at 192/16. A lot to configuring and testing, and an update of VAC to 4.64.0, now allo

I have a feeling the answer is no, but I'll ask - can MultiPSK accept an I/Q signal as input? Thanks....Mike

Hi Patrick, Andrea and Josef, I have been working on the "Laboratory" project to see what is causing the black lines in the LRPT pictures, and I have some (a little) data. I set up two independent str

Greetings, I am copying Pt Reyes station S9+10. with no QRM. I have the decoder set to automatic and save the picture after each picture is decoded. However, the back bar just will not automatically a

Ref: Notebook HP sous WINDOWS (16 Go RAM). j'ai changé de PC et ré-installé le logiciel de PatricK. Ça semble refonctionner, cependant : partant de la fenêtre normale de trafic et décodage, si on mini

HELLO every body. Multipsk cannot function because the line in of the sound car is in use by another program. Enable to know what is this program This message come even I change Realtek or cable VAC W

I'm new at communicating via 1200 baud packet and the International Space Station. As you can see by the attached screenshot, Multipsk works well for capturing the packet data. For those amateur opera

receiving a long ragchew it can be hard lots of long lines, can you set the line length or possibly add it to a future version.

I have yet to try Multipsk for Shortwave Radio Gram MFSK-32 decoding. Does Multipsk auto save pictures that are sent during the broadcast and which folder? Thanks, Glenn Blum Sent from Mail for Window

Hi Patrick, Please see the attached picture. The box circled in red never starts. Is there a button to push to start the decoding? Regards, George, NJ3H Redmond, Oregon USA

Patrick, I am now getting a waterfall for WWVB. Where do I put the cursor line? Please see the attached picture (WWVB.BMP). I have the Perseus set to 59.5 khz, USB. Regards, George On Thursday, Decemb

So nothing is happening in the "Reception of the time frame" box. Years ago with a different system I would see progress in this box. Thanks for the help. Regards, George, NJ3H Redmond, Oregon USA DMR

Greetings, When I run the Clock program I get the subject error message. Then it seems to run ok when I close the message. Why do I get this message? Regards, George, NJ3H Redmond, Oregon USA

Hi Patrick I am actually starting to test Multipsk in LPRT with my RTL/SDR key. I have still to improve the antenna system however in last passage I was able to get some 3800 frames which should sugge

Hi All, Please excuse the "daft laddie" question however, can MultiPSK be used to decode the telemetry from CAS-3G on 145.475 MHZ? The mode used is quoted as "9.6kbps, GMSK". Best Regards, Andy

Hello to all Ham and SWL, New release of MULTIPSK (4.44.1) Due to two annoying regression bugs on the 4.44 version, Multipsk has been updated with the 4.44.1 version. This version is available on http

Hi Patrick I just downloaded 4.44 and tested it with Funcube Pro+. The device is properly recognized (message in low part of screen) , I can set frequency and gain but no signal is detected (black wat

Hi Patrick, Andrea, Josef, et al, I had a nice daylight pass a few minutes ago, and I thought I would provide some data: The signal began to decode at a distance of 2300Km. Here are a sample of my PLL

How do I save the decoded text to a text file. For example decoding Stanag 4285 now. I would like to save all the decoded text. Regards, George

Hopefully someone can clarify this question for me. Using a Perseus SDR, which is always sending the received signal via VAC1 in addition to the default sound device. I have MultiPSK set for sound inp