Irregular, but continuous, flicker on waterfall after download of v45.3 multipsk. Receiving and decoding incoming signal OK. Any thoughts anyone? Arthur G7IKG

I also have a very annoying Waterfall Flicker on all modes when running MultiPSK V4.45.2 on my Windows 10 Computer. There is no flicker problem in any of my other digital COMM programs that have Water

Is it possible to decode AIS and ADS-B say on two separate SDRs and display on one map/chart without internet access?

A question for Patrick VDL2 decoding is also usefull to test 137 Mz NOAA antenna. I have just a little demand. When the plane location is not filled in the frame we have "Position (+/- 3') et altitude

Hello to all, The article in the subject has been published in the « Radioamateur France » magazine at the beginning of August. For the ones interested, you can download this paper here : · http://f6c

I have a couple of questions about decoding Inmarsat signals using Multipsk. I am using an RSP1A with Virtual Audio Cable. Can Multipsk decode IsatM2M signals and if so how do I do so? I can decode AR

Hello Patrick, I'm unable to connect SpotCollector 8.9.2 with Multipsk 4.45.3. Commander 15.2 is also started. As always when I start Multipsk. I think I have made all configuration steps like in the

Hello to all Spanish speakers, Joaquin (EB4Z) has translated in Spanish, the document about the way to do QR Code in SSTV B/W24: “Utilización del código QR en SSTV submodo B/W 24”. This PDF is attache

New release of MULTIPSK (4.45.3) Pour les francophones: la version en français de ce message se trouve sur mon site (http://f6cte.free.fr). Il suffit de cliquer sur le lien "Principales modifications

Hello all, as I can receive very well NOAA APT pictures with Multipsk, is there any sw capable of editing the BMP-saved pictures enhancing and improving the quality with e.g. false colors, IR channel

VDL2_Ground_Stations.txt Multipsk file last update 1850 GS = 1842 + 8 duplicate codes of South Korea. September 5, 2021 Note: same code ranges 1050xA to 1054xA (total 32 codes) are used by USA and Sou

Hello to all, This test version 1 mainly proposes the insertion of a QR Code in a picture in SSTV (sub-mode B/W24): http://f6cte.free.fr/MULTIPSK_4_45_3_test_version_1.zip Paste this address in your I

As the display of the email is not very good (☺) relatively to the use of the QR Code, I have transformed the two texts (English and French) in 2 papers downloadable there: · http://f6cte.free.fr/Use_

Hello to all, Below it will found the updated list of RS ID, with the new RSID-EOT for “End Of Transmission”, to re-enable a squelch or notify a completion of transfer, for example (used by Fldigi). U

Hello to all, For those interested by a TCP/IP interface with SDRplay and TNT receivers, I have updated Multipsk to support these interfaces ("SDR play" and "rtl_tcp.exe" buttons in the Configuration

Hello All: Just upgrading to latest MultiPSK (4.39.4) . I just noticed that I can no longer decode VDL2 from my SDR Duo receiver. I am able to decode ACARS just fine. Anybody have suggestions or worki

Hi, Since a couple of weeks I try to copy EPIRB relays on ca 1544.1 MHz. I copied a number of them but the majority of the location coordinates are either wrong or highly unlikely. Is it a decoding is

For a while now, when I want to use rtl-sdr on multipsk I have had to use DLL. However This week, I have been unable to get them working using the Config Screen. Anyone know why? Thanks. Arthur G7IKG

I'm attempting to have MPSK decode, three virtual receivers in SDRuno. Each receiver output is set to the same virtual cable, so that, MPSK sees only that virtual audio cable (don't know if there's a

Email supposed sent yesterday… De : Patrick Lindecker [mailto:f6cte@...] Envoyé : dimanche 4 juillet 2021 12:14 À : 'Patrick Lindecker' Objet : SAQ Grimeton (Sweden) today - Sainte-Assise Hello to all