Multipsk 4.45.1 Test version 1 - M20 radiosonde decoding


Patrick Lindecker
 

Hello to all,

 

This test version 1 mainly proposes the new M20 radiosonde decoding: http://f6cte.free.fr/MULTIPSK_4_45_1_test_version_1.zip

 

Paste this address in your Internet Explorer or equivalent. Download the file.
Extract the ZIP file and replace the “official” Multipsk.exe with this test version. Before, make a copy of the “official” Multipsk.exe, in case of. It is also proposed new help manuals (chm files).

 

The main improvement of MULTIPSK 4.45.1 is the following:

 

M20 radiosondes decoding

 

The new M20 radiosonde is an improved version of the M10 model. The M20 and the M10 radiosondes share the same description. However, there are differences between addresses of the pieces of information.

 

Note: Multipsk decodes the radiosonde position but not the telemetry (temperature, pressure etc).

 

This mode is available for licencied copies, only (otherwise, the decoding is stopped after 5 minutes).

 

Other improvements:

·                     For BPSK, QPSK, PSKR, PSK63F and MFSK modes, it is proposed a UTF8 characters decoding function (only in RX, not in TX, and limited to 2 characters). The "UTF8" button must be pushed, in case of UTF8 (Fldigi) transmission, i.e. if odd double characters appear instead of accented characters.

·                     Improvement of the RX/TX screen resizing.

·                     Possibility of a 4 times bigger waterfall or spectrum ("x 4" button).

·                     The receiver maximum frequency managed by Multipsk via Commander moves from 4.16 GHz to 24.3 GHz.

 

Thanks for reports on this forum.

 

73

Patrick

 

 

 

 

 


Fred Albertson
 

Hi Patrick,

Thanks for continually improving your great software.

I can no try all aspects, but the waterfall and screen sizing are good.

Great day,

Fred


Glenn Blum
 

Patrick,

I love the 4x waterfall. Thank you very much.

73s,

Glenn

Kd5dga6725

 

Sent from Mail for Windows 10

 


From: multipsk@groups.io <multipsk@groups.io> on behalf of Patrick Lindecker <f6cte@...>
Sent: Tuesday, February 23, 2021 1:42:47 PM
To: multipsk@groups.io <multipsk@groups.io>
Subject: [multipsk] Multipsk 4.45.1 Test version 1 - M20 radiosonde decoding
 

Hello to all,

 

This test version 1 mainly proposes the new M20 radiosonde decoding: http://f6cte.free.fr/MULTIPSK_4_45_1_test_version_1.zip

 

Paste this address in your Internet Explorer or equivalent. Download the file.
Extract the ZIP file and replace the “official” Multipsk.exe with this test version. Before, make a copy of the “official” Multipsk.exe, in case of. It is also proposed new help manuals (chm files).

 

The main improvement of MULTIPSK 4.45.1 is the following:

 

M20 radiosondes decoding

 

The new M20 radiosonde is an improved version of the M10 model. The M20 and the M10 radiosondes share the same description. However, there are differences between addresses of the pieces of information.

 

Note: Multipsk decodes the radiosonde position but not the telemetry (temperature, pressure etc).

 

This mode is available for licencied copies, only (otherwise, the decoding is stopped after 5 minutes).

 

Other improvements:

·                     For BPSK, QPSK, PSKR, PSK63F and MFSK modes, it is proposed a UTF8 characters decoding function (only in RX, not in TX, and limited to 2 characters). The "UTF8" button must be pushed, in case of UTF8 (Fldigi) transmission, i.e. if odd double characters appear instead of accented characters.

·                     Improvement of the RX/TX screen resizing.

·                     Possibility of a 4 times bigger waterfall or spectrum ("x 4" button).

·                     The receiver maximum frequency managed by Multipsk via Commander moves from 4.16 GHz to 24.3 GHz.

 

Thanks for reports on this forum.

 

73

Patrick