Date   
Re: Licence Multipsk

Patrick Lindecker
 

Hello Mauro,

 

I have not received email from your email address. Either your provider or mine refuses to transmit the email, for any reason (it occurs often).

 

Try again with the same address or from another address. We must be able to exchange emails before I send you the user key (via an email).

 

73

Patrick

 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Mauro
Envoyé : dimanche 3 février 2019 12:34
À : multipsk@groups.io
Objet : [multipsk] Licence Multipsk

 

 Hi ,

i'm sorry but I can not contact the author in order to purchase the full license

Thanks in advance
Best regards
73!
IK2GFT
I2-1510
Mauro




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: Multipsk not seeing my rtl-sdr dongle, why?

Patrick Lindecker
 

In your Multipsk directory, have you a “RTL_TCP” sub-directory.

 

What is displayed when you click on “RTL and mode selection”?

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Francesco Lancellotta
Envoyé : samedi 2 février 2019 11:49
À : multipsk@groups.io
Objet : [multipsk] Multipsk not seeing my rtl-sdr dongle, why?

 

My multipsk doesn't see my dongle and if I click on rtl-sdr button then a pop up window comes up saying no rtlsdr.dll BUT this damn files are in the multipsk directory!!! 
What's wrong with this software?? Is there anyone who can help?? I tried to post this morning too but I don't understand how this system works  




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: C-band (INMARSAT 4A-F4)

Patrick Lindecker
 

Thanks Steinar for the information. So I note "1.8m" for 4A-F4 (it would be worst...)

73
Patrick

-----Message d'origine-----
De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Steinar LA5VNA
Envoyé : dimanche 3 février 2019 14:05
À : multipsk@groups.io
Objet : Re: [multipsk] C-band (INMARSAT 4A-F4)

Hi Patrick

Yes it is a C1W-PLL lnb, but not the lite version.

https://www.dropbox.com/s/7ftywghd75wb0q8/20190203_115702.jpg?dl=0

The dish is 1.8 m in diameter, focal Length 67,50 cm

LA5VNA Steinar





Den 02.02.2019 23:47, skrev Patrick Lindecker:

Hello Steinar,



TKS for the information. So you pertain to the small “club” of the C
band listeners ☺

Could you remind us the diameter of your dish. Moreover, the LNBF does
not seem to be a C1W-PLL, is it?



73

Patrick



De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de
Steinar LA5VNA
Envoyé : samedi 2 février 2019 20:23
À : multipsk@groups.io
Objet : [multipsk] C-band (INMARSAT 4A-F4)



Hi all

Here is my latest capture of aero . My dish is pointing to INMARSAT
4A-F4 @ 25° East.

https://www.dropbox.com/s/cvovud8y5dasnpd/c-band.JPG?dl=0

Dish:

https://www.dropbox.com/s/erlr62t8h7hndgy/20190119_164337.jpg?dl=0

Software: Multipsk v 4.38.1 and SDR# 1.0.0.1700

SDR: Airspy R2

LA5VNA Steinar


Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le
logiciel antivirus Avast.
www.avast.com







---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus

Re: Licence Multipsk

Ralf Bender
 

Hi Mauro,

I'm sure Patrick will contact / answer shortly ;-)

73s
Ralf 

Re: Multipsk 4.38.2 - Test version 1 about serial ports (numbers 10 and above)

Ivan Valentin
 

Ok Patrick

Thanks for information.

73
KP3IV / Ivan

 

 

From: multipsk@groups.io [mailto:multipsk@groups.io] On Behalf Of Patrick Lindecker
Sent: Friday, February 01, 2019 2:38 PM
To: multipsk@groups.io
Subject: Re: [multipsk] Multipsk 4.38.2 - Test version 1 about serial ports (numbers 10 and above)

 

Hello Ivan,

 

No, FT8 will not be integrated.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Ivan Valentin
Envoyé : jeudi 31 janvier 2019 02:40
À : multipsk@groups.io
Objet : Re: [multipsk] Multipsk 4.38.2 - Test version 1 about serial ports (numbers 10 and above)

 

Greetings Patrick

 

it will be possible to integrate the FT8 mode to the very very Excellent “”Multipsk Soft.””

It would be excellent as it has the JT65 that works very well.

 

Tnx
73
Ivan / KP3IV

 

 

From: multipsk@groups.io [mailto:multipsk@groups.io] On Behalf Of Patrick Lindecker
Sent: Wednesday, January 30, 2019 7:37 PM
To: multipsk@groups.io
Subject: [multipsk] Multipsk 4.38.2 - Test version 1 about serial ports (numbers 10 and above)

 

Hello to all,

 

The 4.38.1 version introduces a regression bug about serial port (for numbers >=10) that I fixed in this test version 4: http://f6cte.free.fr/MULTIPSK_4_38_2_test_version_1.zip

 

Paste this address in your Internet Explorer or equivalent. Download the file.
Extract the ZIP file and replace the “official” Multipsk.exe with this test version. Before, make a copy of the “official” Multipsk.exe, in case of.

 

73

Patrick

 

 


Image removed by sender. Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com

 

Re: C-Band

Rinaldo
 

Thanks Patrick for your quick reply.
Rinaldo

Licence Multipsk

Mauro
 

 Hi ,
i'm sorry but I can not contact the author in order to purchase the full license
Thanks in advance
Best regards
73!
IK2GFT
I2-1510
Mauro

Multipsk not seeing my rtl-sdr dongle, why?

Francesco Lancellotta <flancellotta@...>
 

My multipsk doesn't see my dongle and if I click on rtl-sdr button then a pop up window comes up saying no rtlsdr.dll BUT this damn files are in the multipsk directory!!! 
What's wrong with this software?? Is there anyone who can help?? I tried to post this morning too but I don't understand how this system works  

Please help me with rtl-sdr v3 dongle and Multipsk #Beginner

Francesco Lancellotta <flancellotta@...>
 

I installed sdr# and my dongle works perfectly (well, the sdrsharp crashes on exit but...) but when I try to use Multipsk it makes me almost crying in frustration. I launch multipsk and select rtl/sdr key but in doing so a warning message appears saying there is a missing rtlsdr.dll file or some others dll. I checked the directory and inside there's the rtlsdr.dll SO why is it not recognising my dongle? Please help, I have been looking all over the internet but people don't give much help, they just say "I had the missing sdr-rtl problem, then solved" but this doesn't help at all.
Francesco

 
 

Re: C-band (INMARSAT 4A-F4)

Steinar LA5VNA
 

Hi Patrick

Yes it is a C1W-PLL lnb, but not the lite version.

https://www.dropbox.com/s/7ftywghd75wb0q8/20190203_115702.jpg?dl=0

The dish is 1.8 m in diameter, focal Length 67,50 cm

LA5VNA Steinar





Den 02.02.2019 23:47, skrev Patrick Lindecker:

Hello Steinar,



TKS for the information. So you pertain to the small “club” of the C
band listeners ☺

Could you remind us the diameter of your dish. Moreover, the LNBF does
not seem to be a C1W-PLL, is it?



73

Patrick



De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de
Steinar LA5VNA
Envoyé : samedi 2 février 2019 20:23
À : multipsk@groups.io
Objet : [multipsk] C-band (INMARSAT 4A-F4)



Hi all

Here is my latest capture of aero . My dish is pointing to INMARSAT
4A-F4 @ 25° East.

https://www.dropbox.com/s/cvovud8y5dasnpd/c-band.JPG?dl=0

Dish:

https://www.dropbox.com/s/erlr62t8h7hndgy/20190119_164337.jpg?dl=0

Software: Multipsk v 4.38.1 and SDR# 1.0.0.1700

SDR: Airspy R2

LA5VNA Steinar


Avast logo   

L'absence de virus dans ce courrier électronique a été vérifiée par le
logiciel antivirus Avast.
www.avast.com

Re: INMARSAT C-Band Channels

Paul Gulliver
 

Hi Chris

Of course you are quite right, I'm receiving Alphasat 4F4 at 25deg East, apologies for the confusion

Paul



On 02/02/2019 at 22:57, Chris van Lint <chrisvanlint@...> wrote:
Hi Paul,

Are you sure you are decoding signals from Inmarst 4F1? 

Re: INMARSAT C-Band Channels

Chris van Lint
 

Hi Paul,

Are you sure you are decoding signals from Inmarst 4F1?  I am decoding 4F1, which is located over central Papua New Guinea and I would have thought the foot print is well beyond your geographical location.  With regards to mitigating the effects of satellite movement, it might be worth considering other means of maintaining the maximum signal possible, in circumstances were we have little or no control over dish movement.  Such measures include using low loss coax, minimising coax cable length and using quality connectors properly fitted.

Cheers,

Chris


At 07:18 PM 2/02/2019, you wrote:
Hi Fred,
First, thanks for the Inmarsat frequency list, very interesting, regarding AOR-E the list corresponds with my list very well :)
My location is Southern UK and I receive C band from AOR-E (3F5) and L band from Alphasat (4F1) although on occasions I turn my helix around and get L band from AOR-E.

Regarding reception of C band, you should be able to get good usable data from AOR-E using a 1.2m dish whilst Inmarsat are still using a series 3 satellite - the series 4 seems to have much lower power transponders and require a 1.8m or greater dish.
Here in the UK I'm using a 1.1m offset dish for AOR-E and getting good data and feeding Plane Plotter with the data.

My C-Band data displayed on VRS https://flic.kr/p/PcEMvP
My dish setup  https://flic.kr/p/2c6rxra


Cheers,

Paul

Re: C-band (INMARSAT 4A-F4)

Patrick Lindecker
 

Hello Steinar,

 

TKS for the information. So you pertain to the small “club” of the C band listeners

Could you remind us the diameter of your dish. Moreover, the LNBF does not seem to be a C1W-PLL, is it?

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Steinar LA5VNA
Envoyé : samedi 2 février 2019 20:23
À : multipsk@groups.io
Objet : [multipsk] C-band (INMARSAT 4A-F4)

 

Hi all

Here is my latest capture of aero . My dish is pointing to INMARSAT 4A-F4 @ 25° East.

https://www.dropbox.com/s/cvovud8y5dasnpd/c-band.JPG?dl=0

Dish:

https://www.dropbox.com/s/erlr62t8h7hndgy/20190119_164337.jpg?dl=0

Software: Multipsk v 4.38.1 and SDR# 1.0.0.1700

SDR: Airspy R2

LA5VNA Steinar




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


C-band (INMARSAT 4A-F4)

Steinar LA5VNA
 

Hi all

Here is my latest capture of aero . My dish is pointing to INMARSAT 4A-F4 @ 25° East.

https://www.dropbox.com/s/cvovud8y5dasnpd/c-band.JPG?dl=0

Dish:

https://www.dropbox.com/s/erlr62t8h7hndgy/20190119_164337.jpg?dl=0

Software: Multipsk v 4.38.1 and SDR# 1.0.0.1700

SDR: Airspy R2

LA5VNA Steinar

Re: INMARSAT C-Band Channels

Patrick Lindecker
 

Hello Fred,

 

Nice, you will not miss room in your “garden”…

 

>between 40 and 50 degrees elevation.

That’s an advantage. In Paris, 3F5 is at 11° and so it is difficult not to have something between your dish and the satellite.

 

>I'm planning on using a Titanium C-Band LNBF C1W-PLL LNB. 
The C1W-PLL seems to be the best LNBF for this use. However, read this paper:

http://planeplotter.pbworks.com/w/file/fetch/121429833/C-Band_LNB_Mod-word.pdf

However, Hervé and Paul don’t seem to have problems, even if they have not modified their C1W-PLL.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Fred Albertson
Envoyé : samedi 2 février 2019 17:15
À : multipsk@groups.io
Objet : Re: [multipsk] INMARSAT C-Band Channels

 

Hi, All,

Thanks Paul and the rest of you for your comments on L-Band,
and your prompting me to try C-Band.  I'll get there.  And, yes,
Patrick, I have a "garden."  It is an 8 acre hay field and my look
angle to most of the satellites in question is between 40 and 50
degrees elevation. A good spot.

I'm planning on using a Titanium C-Band LNBF C1W-PLL LNB. 
Any comments?

Thanks,

Fred



 




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: INMARSAT C-Band Channels

Paul Gulliver
 

Fred,

HaHa, a 8 acre field, well you should be able to manage a 10m motorised dish on that - Seriously with the satellites at 40-50 deg elevation you should be ok with a 1.2m dish, at my location AOR-E varies between 11 and 17degrees

The LNB you suggest is a good one, it's the LNB recommended by the Plane Plotter group.

Are you a member of the Plane Plotter group (PP), if not I suggest you join, plenty of advice on setting up C-band and you could join the rest of us in feeding PP and plot aircraft as they go across the oceans (new feeders are alway very welcome)



Cheers

Paul


On 02/02/2019 at 16:15, Fred Albertson <albertso@...> wrote:
Hi, All,

Thanks Paul and the rest of you for your comments on L-Band,
and your prompting me to try C-Band.  I'll get there.  And, yes,
Patrick, I have a "garden."  It is an 8 acre hay field and my look
angle to most of the satellites in question is between 40 and 50
degrees elevation. A good spot.

I'm planning on using a Titanium C-Band LNBF C1W-PLL LNB. 
Any comments?

Thanks,

Fred




Re: INMARSAT C-Band Channels

Fred Albertson
 

Hi, All,

Thanks Paul and the rest of you for your comments on L-Band,
and your prompting me to try C-Band.  I'll get there.  And, yes,
Patrick, I have a "garden."  It is an 8 acre hay field and my look
angle to most of the satellites in question is between 40 and 50
degrees elevation. A good spot.

I'm planning on using a Titanium C-Band LNBF C1W-PLL LNB. 
Any comments?

Thanks,

Fred



Re: C-Band

Roland Fechter
 

Hello, Rinaldo !

Any luck yet ?

Before freezing myself to death on my balcony and smashing my Gibertini 1.2 dish knowing the experience of those who already tried would be most valuable to me.

Regards,

Roland

Am 01.02.2019 um 19:09 schrieb Patrick Lindecker:

Hello Rinaldo,

 

I don’t think that it is possible to receive C-band from 4A-F4 with a 1.2 m dish. With perhaps a 2 or 2.5m dish (?). I tried to receive with a 1 m dish and I did not see these AERO signals (unfortunately). However if you have yet all the stuff, you can try.

 

You might see the many past messages about this subject  on this forum.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de ghinamor@...
Envoyé : vendredi 1 février 2019 17:45
À : multipsk@groups.io
Objet : [multipsk] C-Band

 

Hi All,

can anyboby help me? I am currently decoding and receiving with an excellent signal1200 and 10500 bauds transmissions from 4A-F4 satellite with a 0.80 m dish on a helical antenna, the receiver is an RTL-SDR.COM V3 or a Funcube dongle pro and lna NooElec SAWbird+ iO Barebones. Now I would like to receive the C-band using C1W-PLL Wideband with 1.20 m dish but I can only receive 4A-F4 signals because the antenna positioned on the balcony can only be oriented towards that satellite. Is it possible? I am in northwestern Italy.

Regards.

Rinaldo




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: INMARSAT C-Band Channels

Phil Walls
 

Same in Australia, seems like they all wander. I can only get readable results for roughly 12 hours..give or take an hour.

On Sat, Feb 2, 2019 at 10:09 PM Paul Gulliver <paulg1953@...> wrote:
Reception is not helped by the fact the elevation of the satellite (from the UK) changes around 7 degrees over a 12 hour period, this means even with a 1.1m dish the dish has to be re-focused 3 or 4 times over that 12 hour period to keep a usable signal. The larger the dish the more times it would have to be re-focused.

Paul



On 02/02/2019 at 09:30, Patrick Lindecker <f6cte@...> wrote:

Hello Paul and all,

 

Thanks for your links Paul. For all, note that with almost the same installation , I could not get 1200 bauds AERO data (from the close south of Paris). The necessary dish size must depend on the location.




--
"Learn to live with what you can't rise above"

Re: INMARSAT C-Band Channels

Paul Gulliver
 

Reception is not helped by the fact the elevation of the satellite (from the UK) changes around 7 degrees over a 12 hour period, this means even with a 1.1m dish the dish has to be re-focused 3 or 4 times over that 12 hour period to keep a usable signal. The larger the dish the more times it would have to be re-focused.

Paul



On 02/02/2019 at 09:30, Patrick Lindecker <f6cte@...> wrote:

Hello Paul and all,

 

Thanks for your links Paul. For all, note that with almost the same installation , I could not get 1200 bauds AERO data (from the close south of Paris). The necessary dish size must depend on the location.