Date   
Re: Bug in Clock?

Philip
 

I can confirm I can see the bug here.
Philip G7JUR

RSP2 decoding with VB cable

Michael Dawson
 

Hi,

Took me a while to figure this out.

This is to report my SDR play RSP2 rx running with HDSDR is decoding using VB cable and MultiPSK.

The VAC cable is only required when running SDR Uno software.

Mike.

Re: Bug in Clock?

David J Taylor
 

Could I ask a novice's question about this?

Are you using the clock function just for fun, or to set the PC's time?

If the latter, you really should consider using NTP which is free, and available for Windows (and other OSes). See:

https://www.satsignal.eu/ntp/setup.html

You can get timekeeping well under a millisecond:

https://www.satsignal.eu/mrtg/performance_ntp.php#windows-stratum-1

There's no way I would consider setting the PC's clock off a broadcast time signal these days (but I have have radio clocks throughout the house), but perhaps that's just me! Comparing it with NTP to see propagation effects is another matter, though.

Cheers,
David
--
SatSignal Software - Quality software for you
Web: http://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv

Re: Bug in Clock?

Patrick Lindecker
 

Thanks Ralf. The file is perfect.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Ralf Bender
Envoyé : jeudi 7 février 2019 23:07
À : multipsk@groups.io
Objet : Re: [multipsk] Bug in Clock?

 

Will this be ok?
Is about 3 minutes. 35 MB:
https://www.dropbox.com/s/p7igsoyyykaryt8/Audacity_20190207_2153Z.wav?dl=0
With wrong day as result. Should be day "7", is "14".




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: Bug in Clock?

Ralf Bender
 

Will this be ok?
Is about 3 minutes. 35 MB:
https://www.dropbox.com/s/p7igsoyyykaryt8/Audacity_20190207_2153Z.wav?dl=0
With wrong day as result. Should be day "7", is "14".

Re: Bug in Clock?

Patrick Lindecker
 

Hello Ralf,

 

Could you make a WAV recording for several minutes (with the best signal possible). With the real day and the wrong day, it will be easier to fix. Thanks.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Ralf Bender via Groups.Io
Envoyé : jeudi 7 février 2019 22:17
À : multipsk@groups.io
Objet : [multipsk] Bug in Clock?

 

Hi Patrick,

I think there is a bug in CLOCK with time sync on BBC. I use the actual version 1.11.7.
I tried it a few days before at 31 January and got 01 February as decode result. Next day, I decode it again and it was correct.  At this point I thought I did something wrong the day before.

Today I got "14" as day, when I decode the signal. I tried it serveral times in USB and LSB. Always with the same wrong result for the day.



Is it a bug or did I something wrong or send they really wrong data?
73, Ralf 

Attachments:




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Bug in Clock?

Ralf Bender
 

Hi Patrick,

I think there is a bug in CLOCK with time sync on BBC. I use the actual version 1.11.7.
I tried it a few days before at 31 January and got 01 February as decode result. Next day, I decode it again and it was correct.  At this point I thought I did something wrong the day before.

Today I got "14" as day, when I decode the signal. I tried it serveral times in USB and LSB. Always with the same wrong result for the day.



Is it a bug or did I something wrong or send they really wrong data?
73, Ralf 

Re: API or source license

Patrick Lindecker
 

Hello Yile,

 

The source is outside the license. The license just frees several functions  (mainly professional modes).

However, decoded data can be transferred via a TCP/IP link or via a file to a exterior application.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Yile Ku
Envoyé : jeudi 7 février 2019 18:23
À : multipsk@groups.io
Objet : [multipsk] API or source license

 

If we are developing our own application and want to use Multipsk, is there an API or can one license the source?

 

Thanks

Y-




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


API or source license

Yile Ku
 

If we are developing our own application and want to use Multipsk, is there an API or can one license the source?

Thanks
Y-

Re: How to purchase ?

Patrick Lindecker
 

Hello Jem,

 

>How does one purchase this fantastic ( Argos-3 decoding ) software ?

For the license, simply send me an email (f6cte@...). I will give you the conditions.

Note: there is 5 mn of free use to test the reception (each time you start Multipsk).

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Jeremy Church
Envoyé : mercredi 6 février 2019 22:13
À : multipsk@groups.io
Objet : [multipsk] How to purchase ?

 

Hi all,

 

How does one purchase this fantastic ( Argos-3 decoding ) software ?

 

Many thanks,

 

Jem.

 




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: How to purchase ?

Dick
 

I am sure the Help will tell you :-)

 

Cheers,

Dick

 

Van: multipsk@groups.io [mailto:multipsk@groups.io] Namens Jeremy Church
Verzonden: Wednesday, February 6, 2019 22:13
Aan: multipsk@groups.io
Onderwerp: [multipsk] How to purchase ?

 

Hi all,

 

How does one purchase this fantastic ( Argos-3 decoding ) software ?

 

Many thanks,

 

Jem.

How to purchase ?

Jeremy Church
 

Hi all,

How does one purchase this fantastic ( Argos-3 decoding ) software ?

Many thanks,

Jem.

Re: Test version not using VDL2 station list #aero

Patrick Lindecker
 

>Is there a limitation on the size of the file?  Mine currently has over 500 lines.

The limit is 1000 lines in the last version, but it can be extended in the next versions,  in case of need.

 

73

Patrick

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de David Stark
Envoyé : jeudi 7 février 2019 00:27
À : multipsk@groups.io
Objet : Re: [multipsk] Test version not using VDL2 station list #aero

 

Is there a limitation on the size of the file?  Mine currently has over 500 lines.




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: Test version not using VDL2 station list #aero

David Stark
 

Is there a limitation on the size of the file?  Mine currently has over 500 lines.

Re: Test version not using VDL2 station list #aero

James C Miller <Cameojcm@...>
 

Could someone share a map for multipsk that references just new York state USA
Thank you
 



On February 6, 2019, at 3:07 PM, Patrick Lindecker <f6cte@...> wrote:


Hello Dave,

 

I checked with the last version (4.38.2). There is no special problem.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de David Stark
Envoyé : mercredi 6 février 2019 14:45
À : multipsk@groups.io
Objet : [multipsk] Test version not using VDL2 station list #aero

 

Since I installed the test version of 4.38, MultiPSK no longer reads data from the VDL2 ground stations file.

-Dave, NF2G




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: Test version not using VDL2 station list #aero

Patrick Lindecker
 

Hello Dave,

 

I checked with the last version (4.38.2). There is no special problem.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de David Stark
Envoyé : mercredi 6 février 2019 14:45
À : multipsk@groups.io
Objet : [multipsk] Test version not using VDL2 station list #aero

 

Since I installed the test version of 4.38, MultiPSK no longer reads data from the VDL2 ground stations file.

-Dave, NF2G




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Test version not using VDL2 station list #aero

David Stark
 

Since I installed the test version of 4.38, MultiPSK no longer reads data from the VDL2 ground stations file.

-Dave, NF2G

Re: Settings for ic7300

James C Miller <Cameojcm@...>
 

No...I am not
  Can you send me the link for that
  Thanks
  Hopefully it will work on a win 7 system



On February 5, 2019, at 10:26 AM, Andrew OBrien <k3ukandy@...> wrote:


How are you setting this up? I use Commander with Multipsk since it works seamlessly with Multipsk , then just pick the 7300 in Commander .  Let me know if you are not using Commander.

Re: Settings for ic7300

Andrew OBrien
 

How are you setting this up? I use Commander with Multipsk since it works seamlessly with Multipsk , then just pick the 7300 in Commander .  Let me know if you are not using Commander.

Settings for ic7300

James C Miller <Cameojcm@...>
 

Can someone post the PTT settings to use multipsk with an icom7300.
I am able to receive and decode and transmit manually,,but can't get the auto PTT to configure.