Date   
VDL2LogStats

Stuart
 

Hi all,
 
I have just released VDL2LogStats v1.2. It can read a VDL2 log file generated by MultiPSK (English, French and Spanish), dumpvdl2 and vdlm2dec, and extracts and displays various statistics e.g. 
Number of Messages
Number of Uplink Messages
Number of Downlink Messages
Number of Acars messages,
Number of messages per hour
Number of messages per hour per frequency
List of received ground stations (in various orders)
List of aircraft logged
List of Destination Airports
Broadcast (GSIF) Messages received etc
 
See acars-vdl2@groups.io message #488. The zip file is available in the Files Section of acars-vdl2@groups.io.
If you are interested in VDL2 and not already a member, then I suggest you join the acars-vdl2@groups.io.
 
Regards
Stuart

Re: SSTV PIcture Lost??

Floyd Bixler
 

Tks for the help on this issue.  After multiple searches and looking for anything, I’ve pretty much come to the conclusion that this picture is no longer available.  I believe it was lost immediately after the ISS transmission ended (that’s when the picture disappeared).  The sstv_rx directory was also not created.

 

This probably all boils down to a permissions issue during installation.

 

I would have, however, expected some kind of error message from MultiPSK that the picture could not be stored and the option to put it somewhere else.  Maybe a change request??

 

Anyway, we have another chance to do this again in the next couple days (starting today) and we’ll see what happens this time.

 

73 and good luck with the pictures. I still got my award after the last one even though I could only submit half.

 

Floyd, DA1VF/WD8DUP

Re: SSTV PIcture Lost??

Shawnerz
 

You could do search at the root off the hard drive for *.jpg or *.bmp or whatever for the picture is stored in. It return a lot results. But it is better than nothing.
-Shawn

On Thursday, February 14, 2019, 8:19:02 AM CST, Floyd Bixler <wd8dup@...> wrote:


There is no SSTV_rx folder to be found.  When does this folder get created; at install or after the first picture received.  I would have expected an error message when the picture couldn’t be saved.

 

Does this picture still exist anywhere?

 

Tks for the help on this, 73, Floyd, DA1VF/WD8DUP

 

Sent from Mail for Windows 10

 

From: Patrick Lindecker
Sent: Wednesday, February 13, 2019 18:30
To: multipsk@groups.io
Subject: Re: [multipsk] SSTV PIcture Lost??

 

Hello Floyd,

 

>I am assuming that the directory is located in the C:\files directory, correct?

No, the  SSTV_rx sub-directory is in the Multipsk directory (as all the files and sub-directories of the Multipsk program).

 

73

Patrick

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : mercredi 13 février 2019 12:15
À : multipsk@groups.io
Objet : Re: [multipsk] SSTV PIcture Lost??

 

Noticed that “Auto Save” is on but there is not SSTV_rx directory.  Now the question is whether this directory is created during the install or if it gets created when the first picture is received.  I am assuming that the directory is located in the C:\files directory, correct?

 

Tks for the help.  I’m really hoping this picture is somewhere to be called up.  It was the best ISS download I’ve had to date.

 

Tks again.

 

73, Floyd DA1VF/WD8DUP

 

Sent from Mail for Windows 10

 

From: Patrick Lindecker
Sent: Monday, February 11, 2019 23:44
To: multipsk@groups.io
Subject: Re: [multipsk] SSTV PIcture Lost??

 

Hello Floyd,

 

IF « Auto Save » was pushed, the received pictures are in the sub-directory SSTV_RX.

If AutoSave was not pushed, could you tell us which SSTV commands were pushed.

 

73

Patrick

About the help in Multipsk:

- To bring up the text help (contextual sensitive one), click on the right button of the mouse, with the cursor over the mode button "SSTV", for example).
- Also use the button hints (wait a fraction of second over a button).

 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : samedi 9 février 2019 17:38
À : multipsk@groups.io
Objet : [multipsk] SSTV PIcture Lost??

 

Been working with different SSTV decoders and have a problem with MultiPSK.  I was receiving one of the best pictures from the ISS I've had in awhile,  But when the transmission was finished, the picture disappeared and is not to be found. 

I'm hoping someone can tell me where this picture went, if it's still retrievable, and how to avoid this in the future.

The picture history button is empty.

Tks.

Floyd DA1VF/WD8DUP

 

Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com

 

 

 

Re: SSTV PIcture Lost??

Richard Gagnon
 

Hi Floyd,  

          I tried to duplicate your problem with the lost SSTV image. I started MULTIPSK and selected decoded PSK31 and JT65 and then I tried SSTV.  Unfortunately
i could not  find a signal to generate an image. In the  QSO folder,  in the latest file I found the logs for PKS31 and JT65 and an entry for SSTV (but no image because I did not capture one.).  Check to see if the image is in this directory..
Good Luck

Richard, KU1P

Re: SSTV PIcture Lost??

Patrick Lindecker
 

Hello Floyd,

 

> There is no SSTV_rx folder to be found.

I just tried the SSTV function “Auto Save”. It works well. This folder is created the first time a picture is automatically (“Auto Save” On) or manually stored (with the “diskette”).

 

Try to receive a SSTV picture normally (“Synchro” On) and store it with the “diskette”. You must see that a SSTV_rx sub-folder is created.

If not, it is a problem of rights (something prevents the file creation). If the Multipsk program is under the C:\Programs file you must create a C:\MULTIPSK folder and copy-paste all the Multipsk files and sub-folders to this folder.

 

Try also to start Multipsk as Administrator.

 

>Does this picture still exist anywhere?

If the SSTV_RX sub-folder does not exist in the Multipsk folder, no.

 

73

Patrick

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : jeudi 14 février 2019 15:19
À : multipsk@groups.io
Objet : Re: [multipsk] SSTV PIcture Lost??

 

There is no SSTV_rx folder to be found.  When does this folder get created; at install or after the first picture received.  I would have expected an error message when the picture couldn’t be saved.

 

Does this picture still exist anywhere?

 

Tks for the help on this, 73, Floyd, DA1VF/WD8DUP

 

Sent from Mail for Windows 10

 

From: Patrick Lindecker
Sent: Wednesday, February 13, 2019 18:30
To: multipsk@groups.io
Subject: Re: [multipsk] SSTV PIcture Lost??

 

Hello Floyd,

 

>I am assuming that the directory is located in the C:\files directory, correct?

No, the  SSTV_rx sub-directory is in the Multipsk directory (as all the files and sub-directories of the Multipsk program).

 

73

Patrick

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : mercredi 13 février 2019 12:15
À : multipsk@groups.io
Objet : Re: [multipsk] SSTV PIcture Lost??

 

Noticed that “Auto Save” is on but there is not SSTV_rx directory.  Now the question is whether this directory is created during the install or if it gets created when the first picture is received.  I am assuming that the directory is located in the C:\files directory, correct?

 

Tks for the help.  I’m really hoping this picture is somewhere to be called up.  It was the best ISS download I’ve had to date.

 

Tks again.

 

73, Floyd DA1VF/WD8DUP

 

Sent from Mail for Windows 10

 

From: Patrick Lindecker
Sent: Monday, February 11, 2019 23:44
To: multipsk@groups.io
Subject: Re: [multipsk] SSTV PIcture Lost??

 

Hello Floyd,

 

IF « Auto Save » was pushed, the received pictures are in the sub-directory SSTV_RX.

If AutoSave was not pushed, could you tell us which SSTV commands were pushed.

 

73

Patrick

About the help in Multipsk:

- To bring up the text help (contextual sensitive one), click on the right button of the mouse, with the cursor over the mode button "SSTV", for example).
- Also use the button hints (wait a fraction of second over a button).

 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : samedi 9 février 2019 17:38
À : multipsk@groups.io
Objet : [multipsk] SSTV PIcture Lost??

 

Been working with different SSTV decoders and have a problem with MultiPSK.  I was receiving one of the best pictures from the ISS I've had in awhile,  But when the transmission was finished, the picture disappeared and is not to be found. 

I'm hoping someone can tell me where this picture went, if it's still retrievable, and how to avoid this in the future.

The picture history button is empty.

Tks.

Floyd DA1VF/WD8DUP

 

Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com

 

 

 

Re: SSTV PIcture Lost??

Floyd Bixler
 

There is no SSTV_rx folder to be found.  When does this folder get created; at install or after the first picture received.  I would have expected an error message when the picture couldn’t be saved.

 

Does this picture still exist anywhere?

 

Tks for the help on this, 73, Floyd, DA1VF/WD8DUP

 

Sent from Mail for Windows 10

 

From: Patrick Lindecker
Sent: Wednesday, February 13, 2019 18:30
To: multipsk@groups.io
Subject: Re: [multipsk] SSTV PIcture Lost??

 

Hello Floyd,

 

>I am assuming that the directory is located in the C:\files directory, correct?

No, the  SSTV_rx sub-directory is in the Multipsk directory (as all the files and sub-directories of the Multipsk program).

 

73

Patrick

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : mercredi 13 février 2019 12:15
À : multipsk@groups.io
Objet : Re: [multipsk] SSTV PIcture Lost??

 

Noticed that “Auto Save” is on but there is not SSTV_rx directory.  Now the question is whether this directory is created during the install or if it gets created when the first picture is received.  I am assuming that the directory is located in the C:\files directory, correct?

 

Tks for the help.  I’m really hoping this picture is somewhere to be called up.  It was the best ISS download I’ve had to date.

 

Tks again.

 

73, Floyd DA1VF/WD8DUP

 

Sent from Mail for Windows 10

 

From: Patrick Lindecker
Sent: Monday, February 11, 2019 23:44
To: multipsk@groups.io
Subject: Re: [multipsk] SSTV PIcture Lost??

 

Hello Floyd,

 

IF « Auto Save » was pushed, the received pictures are in the sub-directory SSTV_RX.

If AutoSave was not pushed, could you tell us which SSTV commands were pushed.

 

73

Patrick

About the help in Multipsk:

- To bring up the text help (contextual sensitive one), click on the right button of the mouse, with the cursor over the mode button "SSTV", for example).
- Also use the button hints (wait a fraction of second over a button).

 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : samedi 9 février 2019 17:38
À : multipsk@groups.io
Objet : [multipsk] SSTV PIcture Lost??

 

Been working with different SSTV decoders and have a problem with MultiPSK.  I was receiving one of the best pictures from the ISS I've had in awhile,  But when the transmission was finished, the picture disappeared and is not to be found. 

I'm hoping someone can tell me where this picture went, if it's still retrievable, and how to avoid this in the future.

The picture history button is empty.

Tks.

Floyd DA1VF/WD8DUP

 

Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com

 

 

 

Re: #MultipskNEWS New calling frequency for 17M PSK31 #MultipskNEWS

Thierry
 

Since FT8, JT* activities are very very low but as a JT65 user I can tell you that this frequencie is still used, not a lot but it is.

Le 13/02/2019 à 19:42, Andrew O'Brien a écrit :
Good point Thierry , I will look and see if there is any JT9 or 65 activity these days 
Andy . 


On Feb 13, 2019, at 1:18 PM, Thierry via Groups.Io <f14314xe@...> wrote:

18102 USB (dial) is already used by JT65/JT9 activities.... is 18103 a little close ?


Le 13/02/2019 à 18:08, Andrew OBrien a écrit :
I am proposing that 18103 USB (dial) plus 1000Hz center frequency be the new PSK31 calling frequency
 

Andy K3UK
-- 

Thierry, F-14314, JN38JK, Delta Loop Antenna ~83m
-- 

Thierry, F-14314, JN38JK, Delta Loop Antenna ~83m

Re: #RSID Modes detected 20M #RSID

Andrew O'Brien
 

I have often heard RSID for PSK31 , seems odd but perhaps useful these days . I am surprised how many hams are still very in uncertain about how to become active on digital modes . It is interesting to watch the comments and questions from new FT8 users . Same questions we all asked in 1999 when PSK31 was new and we had no idea how to link radio and computer .
Andy K3UK. 


On Feb 13, 2019, at 12:33 PM, Patrick Lindecker <f6cte@...> wrote:

TKS for the information Andy.

So the RSID is still used (with one related to BPSK31, which is curious, or perhaps BPSK31 is becoming an exotic mode ☺).

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Andrew OBrien
Envoyé : mercredi 13 février 2019 17:49
À : multipsk@groups.io
Objet : [multipsk] #RSID Modes detected 20M

 

FYI modes detected yesterday on 20M 14070-73

22:09:09 UTC ALE400            2514 Hz
21:42:23 UTC CONTESTIA-8-250   2185 Hz
21:36:40 UTC CONTESTIA-8-250   2573 Hz
21:26:46 UTC CONTESTIA-8-250   2314 Hz
21:21:05 UTC CONTESTIA-8-250   2519 Hz
21:18:41 UTC OLIVIA-8-500      2309 Hz
21:18:35 UTC CONTESTIA-8-250   2314 Hz
21:14:35 UTC OLIVIA-8-500      2309 Hz
21:08:37 UTC OLIVIA-8-500      2314 Hz
21:06:20 UTC OLIVIA-8-500      2304 Hz
19:55:46 UTC OLIVIA-4-250      1458 Hz
18:06:44 UTC BPSK31            1798 Hz
17:59:50 UTC CONTESTIA-8-250   2492 Hz
16:09:15 UTC OLIVIA-16-500     2384 Hz
15:05:19 UTC MFSK16            2147 Hz
15:00:26 UTC MFSK16            2153 Hz

Andy K3UK




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: #RSID Modes detected 20M #RSID

Fred Albertson
 

Hi Patrick,

The RSID capability is a great one, and the algorithm is very sensitive. 
I listen to several HF radio programs that use RSID for changing modes.
That is the only way it is practical, because, with time zones and prop,
we have to have an automatic method for mode changes, as the programs
are at all hours of the day and night.

Take a listen to Short Wave Radiogram (SWR), produced by
Kim Andrew Elliott (http://swradiogram.net), or Broad Spectrum Radio,
(http://broadspectrumradio.com/about-bsr/shortwave-radio-schedule/bsr-international-shortwave-broadcasts/).

Both have weekly schedules of digital mode transmissions using RSID
with pictures and text in varying modes.

A particularly interesting one is the SWR transmission on 13690kHz which
uses WINB (Red Lion, PA USA) to send DRM audio.  Currently that transmission
is at 1500-1530 UTC on Friday.  I am in the skip zone, so I copy via
an European KiwiSDR.

For this DRM version, Kim has built a program using many different digital
modes which decode pretty well using MultiPSK.  Some of these are very
fast text modes, and pictures are added in.

Thanks and keep up the good work.

Great day,

Fred

Fred Albertson
Broadway, VA USA

Re: #MultipskNEWS New calling frequency for 17M PSK31 #MultipskNEWS

Andrew O'Brien
 

Good point Thierry , I will look and see if there is any JT9 or 65 activity these days 
Andy . 


On Feb 13, 2019, at 1:18 PM, Thierry via Groups.Io <f14314xe@...> wrote:

18102 USB (dial) is already used by JT65/JT9 activities.... is 18103 a little close ?


Le 13/02/2019 à 18:08, Andrew OBrien a écrit :
I am proposing that 18103 USB (dial) plus 1000Hz center frequency be the new PSK31 calling frequency
 

Andy K3UK
-- 

Thierry, F-14314, JN38JK, Delta Loop Antenna ~83m

Re: #MultipskNEWS New calling frequency for 17M PSK31 #MultipskNEWS

Thierry
 

18102 USB (dial) is already used by JT65/JT9 activities.... is 18103 a little close ?


Le 13/02/2019 à 18:08, Andrew OBrien a écrit :
I am proposing that 18103 USB (dial) plus 1000Hz center frequency be the new PSK31 calling frequency
 

Andy K3UK
-- 

Thierry, F-14314, JN38JK, Delta Loop Antenna ~83m

Re: #RSID Modes detected 20M #RSID

Patrick Lindecker
 

TKS for the information Andy.

So the RSID is still used (with one related to BPSK31, which is curious, or perhaps BPSK31 is becoming an exotic mode ☺).

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Andrew OBrien
Envoyé : mercredi 13 février 2019 17:49
À : multipsk@groups.io
Objet : [multipsk] #RSID Modes detected 20M

 

FYI modes detected yesterday on 20M 14070-73

22:09:09 UTC ALE400            2514 Hz
21:42:23 UTC CONTESTIA-8-250   2185 Hz
21:36:40 UTC CONTESTIA-8-250   2573 Hz
21:26:46 UTC CONTESTIA-8-250   2314 Hz
21:21:05 UTC CONTESTIA-8-250   2519 Hz
21:18:41 UTC OLIVIA-8-500      2309 Hz
21:18:35 UTC CONTESTIA-8-250   2314 Hz
21:14:35 UTC OLIVIA-8-500      2309 Hz
21:08:37 UTC OLIVIA-8-500      2314 Hz
21:06:20 UTC OLIVIA-8-500      2304 Hz
19:55:46 UTC OLIVIA-4-250      1458 Hz
18:06:44 UTC BPSK31            1798 Hz
17:59:50 UTC CONTESTIA-8-250   2492 Hz
16:09:15 UTC OLIVIA-16-500     2384 Hz
15:05:19 UTC MFSK16            2147 Hz
15:00:26 UTC MFSK16            2153 Hz

Andy K3UK




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: SSTV PIcture Lost??

Patrick Lindecker
 

Hello Floyd,

 

>I am assuming that the directory is located in the C:\files directory, correct?

No, the  SSTV_rx sub-directory is in the Multipsk directory (as all the files and sub-directories of the Multipsk program).

 

73

Patrick

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : mercredi 13 février 2019 12:15
À : multipsk@groups.io
Objet : Re: [multipsk] SSTV PIcture Lost??

 

Noticed that “Auto Save” is on but there is not SSTV_rx directory.  Now the question is whether this directory is created during the install or if it gets created when the first picture is received.  I am assuming that the directory is located in the C:\files directory, correct?

 

Tks for the help.  I’m really hoping this picture is somewhere to be called up.  It was the best ISS download I’ve had to date.

 

Tks again.

 

73, Floyd DA1VF/WD8DUP

 

Sent from Mail for Windows 10

 

From: Patrick Lindecker
Sent: Monday, February 11, 2019 23:44
To: multipsk@groups.io
Subject: Re: [multipsk] SSTV PIcture Lost??

 

Hello Floyd,

 

IF « Auto Save » was pushed, the received pictures are in the sub-directory SSTV_RX.

If AutoSave was not pushed, could you tell us which SSTV commands were pushed.

 

73

Patrick

About the help in Multipsk:

- To bring up the text help (contextual sensitive one), click on the right button of the mouse, with the cursor over the mode button "SSTV", for example).
- Also use the button hints (wait a fraction of second over a button).

 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : samedi 9 février 2019 17:38
À : multipsk@groups.io
Objet : [multipsk] SSTV PIcture Lost??

 

Been working with different SSTV decoders and have a problem with MultiPSK.  I was receiving one of the best pictures from the ISS I've had in awhile,  But when the transmission was finished, the picture disappeared and is not to be found. 

I'm hoping someone can tell me where this picture went, if it's still retrievable, and how to avoid this in the future.

The picture history button is empty.

Tks.

Floyd DA1VF/WD8DUP

 

Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com

 

 

Re: SSTV PIcture Lost??

Patrick Lindecker
 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : mercredi 13 février 2019 12:15
À : multipsk@groups.io
Objet : Re: [multipsk] SSTV PIcture Lost??

 

Noticed that “Auto Save” is on but there is not SSTV_rx directory.  Now the question is whether this directory is created during the install or if it gets created when the first picture is received.  I am assuming that the directory is located in the C:\files directory, correct?

 

Tks for the help.  I’m really hoping this picture is somewhere to be called up.  It was the best ISS download I’ve had to date.

 

Tks again.

 

73, Floyd DA1VF/WD8DUP

 

Sent from Mail for Windows 10

 

From: Patrick Lindecker
Sent: Monday, February 11, 2019 23:44
To: multipsk@groups.io
Subject: Re: [multipsk] SSTV PIcture Lost??

 

Hello Floyd,

 

IF « Auto Save » was pushed, the received pictures are in the sub-directory SSTV_RX.

If AutoSave was not pushed, could you tell us which SSTV commands were pushed.

 

73

Patrick

About the help in Multipsk:

- To bring up the text help (contextual sensitive one), click on the right button of the mouse, with the cursor over the mode button "SSTV", for example).
- Also use the button hints (wait a fraction of second over a button).

 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : samedi 9 février 2019 17:38
À : multipsk@groups.io
Objet : [multipsk] SSTV PIcture Lost??

 

Been working with different SSTV decoders and have a problem with MultiPSK.  I was receiving one of the best pictures from the ISS I've had in awhile,  But when the transmission was finished, the picture disappeared and is not to be found. 

I'm hoping someone can tell me where this picture went, if it's still retrievable, and how to avoid this in the future.

The picture history button is empty.

Tks.

Floyd DA1VF/WD8DUP

 

Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com

 

 

#MultipskNEWS New calling frequency for 17M PSK31 #MultipskNEWS

Andrew OBrien
 

I am proposing that 18103 USB (dial) plus 1000Hz center frequency be the new PSK31 calling frequency
 

Andy K3UK

#RSID Modes detected 20M #RSID

Andrew OBrien
 

FYI modes detected yesterday on 20M 14070-73

22:09:09 UTC ALE400            2514 Hz
21:42:23 UTC CONTESTIA-8-250   2185 Hz
21:36:40 UTC CONTESTIA-8-250   2573 Hz
21:26:46 UTC CONTESTIA-8-250   2314 Hz
21:21:05 UTC CONTESTIA-8-250   2519 Hz
21:18:41 UTC OLIVIA-8-500      2309 Hz
21:18:35 UTC CONTESTIA-8-250   2314 Hz
21:14:35 UTC OLIVIA-8-500      2309 Hz
21:08:37 UTC OLIVIA-8-500      2314 Hz
21:06:20 UTC OLIVIA-8-500      2304 Hz
19:55:46 UTC OLIVIA-4-250      1458 Hz
18:06:44 UTC BPSK31            1798 Hz
17:59:50 UTC CONTESTIA-8-250   2492 Hz
16:09:15 UTC OLIVIA-16-500     2384 Hz
15:05:19 UTC MFSK16            2147 Hz
15:00:26 UTC MFSK16            2153 Hz

Andy K3UK

Re: SSTV PIcture Lost??

Floyd Bixler
 

Noticed that “Auto Save” is on but there is not SSTV_rx directory.  Now the question is whether this directory is created during the install or if it gets created when the first picture is received.  I am assuming that the directory is located in the C:\files directory, correct?

 

Tks for the help.  I’m really hoping this picture is somewhere to be called up.  It was the best ISS download I’ve had to date.

 

Tks again.

 

73, Floyd DA1VF/WD8DUP

 

Sent from Mail for Windows 10

 

From: Patrick Lindecker
Sent: Monday, February 11, 2019 23:44
To: multipsk@groups.io
Subject: Re: [multipsk] SSTV PIcture Lost??

 

Hello Floyd,

 

IF « Auto Save » was pushed, the received pictures are in the sub-directory SSTV_RX.

If AutoSave was not pushed, could you tell us which SSTV commands were pushed.

 

73

Patrick

About the help in Multipsk:

- To bring up the text help (contextual sensitive one), click on the right button of the mouse, with the cursor over the mode button "SSTV", for example).
- Also use the button hints (wait a fraction of second over a button).

 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : samedi 9 février 2019 17:38
À : multipsk@groups.io
Objet : [multipsk] SSTV PIcture Lost??

 

Been working with different SSTV decoders and have a problem with MultiPSK.  I was receiving one of the best pictures from the ISS I've had in awhile,  But when the transmission was finished, the picture disappeared and is not to be found. 

I'm hoping someone can tell me where this picture went, if it's still retrievable, and how to avoid this in the future.

The picture history button is empty.

Tks.

Floyd DA1VF/WD8DUP

 

Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com



 

Re: Feature request

Patrick Lindecker
 

Hello Arnaud,

 

From the programs that you gave us the only Windows program freely available is Google Earth (GE)? Do you confirm?

 

Do you know what NMEA frame is accepted by GE and what is the serial format (or where to find the precise specifications)?

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de arneir77@...
Envoyé : mardi 12 février 2019 21:16
À : multipsk@groups.io
Objet : Re: [multipsk] Feature request

 

Hello Patrick,

Like in gpsfeed+ it was greet if we can chose whitch sentence (one or multiple) to send like
NMEA format
$GPGGA
$GPGLL
$GPRMC
$GPWPL
$PMGNWPL
$PKWDWPL

For position software you can use any you want accept gpw connection. Google earth, locus map, carto explorer, kenwood APRS compatible waypoint TM-D710.

An additionnal wind rose like in sond monitor can be a plus


73
Arnaud




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: Feature request

F4EIR Arnaud
 

Hello Patrick,

Like in gpsfeed+ it was greet if we can chose whitch sentence (one or multiple) to send like
NMEA format
$GPGGA
$GPGLL
$GPRMC
$GPWPL
$PMGNWPL
$PKWDWPL

For position software you can use any you want accept gpw connection. Google earth, locus map, carto explorer, kenwood APRS compatible waypoint TM-D710.

An additionnal wind rose like in sond monitor can be a plus


73
Arnaud

Re: SSTV PIcture Lost??

Patrick Lindecker
 

Hello Floyd,

 

IF « Auto Save » was pushed, the received pictures are in the sub-directory SSTV_RX.

If AutoSave was not pushed, could you tell us which SSTV commands were pushed.

 

73

Patrick

About the help in Multipsk:

- To bring up the text help (contextual sensitive one), click on the right button of the mouse, with the cursor over the mode button "SSTV", for example).
- Also use the button hints (wait a fraction of second over a button).

 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Floyd Bixler
Envoyé : samedi 9 février 2019 17:38
À : multipsk@groups.io
Objet : [multipsk] SSTV PIcture Lost??

 

Been working with different SSTV decoders and have a problem with MultiPSK.  I was receiving one of the best pictures from the ISS I've had in awhile,  But when the transmission was finished, the picture disappeared and is not to be found. 

I'm hoping someone can tell me where this picture went, if it's still retrievable, and how to avoid this in the future.

The picture history button is empty.

Tks.

Floyd DA1VF/WD8DUP




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com