Date   
Re: Display-Launcher updated

Dick
 

Thanks Mike,

 

Just updated only PCHFDL-Display from the latest full version and Muan is now shown in the ‘frequencies in use’ tab as well as in the ‘FreqsInUse.csv’ file.


Cheers,

Dick

 

Display-Launcher updated

MadMike
 


Following the introduction of the Muan GS last month, Dick pointed out that PCHFDL-Display was not correctly displaying some data, especially the Freqs. In Use screen.

I have fixed this and it should work correctly now.

As a number of other modules have been updated recently (AERO-Display and ACARS-VDL2-Display in particular), I have uploaded a new full version of the program to http://www.agenetools.com/downloads/Display-Launcher.zip

I suggest that any users of Display-Launcher should update to this latest version.

Regards, Mike Simpson
South Penrith, NSW, Australia



Re: Display-Launcher - for MultiPSK

MadMike
 

Hi Bob,

I have set up 2 PCs here now, one with Australian date/time settings and one as if it was in use in USA. These work correctly, the Australian one shows the QSOs from MultiPSK with dates for 3rd April as 03/04/19 and the USA one shows the dates as 04/03/19. When Display-Launcher is set up in either AERO-Display or ACARS-VDL2 it decodes either set of QSO files correctly, whether received live from the RX or from old QSO files.

The one you sent me QSO 4019-04-03.txt crashed because the file finished with a single carriage return/line feed. Adding a couple more cr/lf and it worked OK

I have posted a new version of Display-Launcher on my site today, maybe it will work better for you. However other users in the U.S. Have said the previous version was working over there OK.

Regards, Mike Simpson
South Penrith, NSW, Australia


Re: Display-Launcher - for MultiPSK

bob schippacase
 

Hi Mike

Here is a QSO file that did not decode thru Acars VDL2 ver 1.054. I did check your suggestions but no luck so far.
I read this file as a read qso and it stoped with a runtime error 52.
Any help greatly appreciated.

Hitachi worldspace patch antenna #aero

Roland Fechter
 

Hello,
I wonder if the Hitachi patch antenna can be used for receiving the L-band of Aero.
Is the removal of its 1472 MHz saw filter really necessary for this purpose ?
Is it necessary to add an LNA ?
Which voltage is needed to power the antenna - and-or ? the LNA ?
Thanks in advance,
Regards,
Roland
 

Re: For Sale: Yaesu FT-897D New In The Box

Tony
 

All:

The FT-897D has been sold.

Tony

Pictures Of New FT-897D For Sale Posted

Tony
 

All:

Pictures of the new FT-897D I have for sale can be found here:

https://www.youtube.com/watch?v=HMT7wqqNjjM

Sale goes to buyer with the best offer. Please contact me direct: dxdx@...

Payment must be via Paypal. Shipped to U.S. buyers Only

Thank you,

Tony

For Sale: Yeasu FT-897D New in The Box

Tony
 

All:

I purchased a new unopened box Yaesu FT-897D from an estate sale. It came with the FP-30 A/C power supply and a Yaesu 300 Hz CW filter that were also unopened in the box. I tested the radio and it looks and functions like a new transceiver.

It's an all-mode HF, 50/144/430 MHz transceiver that comes with 60 meters and the TXCO from the factory. It can be used with internal batteries or the internal FP-30 A/C power supply that it came with.

I can provide pictures for those interested. My email address is: dxdx@...

Tony -K2MO

Re: Display-Launcher updated - AERO

Steve Collins
 

Many thanks Dick that did the trick

 

73 Steve

 

 

Sent from Mail for Windows 10

 


From: multipsk@groups.io <multipsk@groups.io> on behalf of Dick <hobbyd@...>
Sent: Friday, March 29, 2019 4:47:53 PM
To: multipsk@groups.io
Subject: Re: [multipsk] Display-Launcher updated - AERO
 
On Fri, Mar 29, 2019 at 05:23 PM, Steve Collins wrote:

> I have tried pointing it to the directory containing Multipsk.exe

AFAIK you should point it to the directory where MultiPSK creates the QSO files.

73, Dick



Re: Display-Launcher updated - AERO

Steve Collins
 

Thank you will try that again 73

 

 

Sent from Mail for Windows 10

 


From: multipsk@groups.io <multipsk@groups.io> on behalf of Dick <hobbyd@...>
Sent: Friday, March 29, 2019 4:47:53 PM
To: multipsk@groups.io
Subject: Re: [multipsk] Display-Launcher updated - AERO
 
On Fri, Mar 29, 2019 at 05:23 PM, Steve Collins wrote:

> I have tried pointing it to the directory containing Multipsk.exe

AFAIK you should point it to the directory where MultiPSK creates the QSO files.

73, Dick



Re: Display-Launcher updated - AERO

Dick
 

On Fri, Mar 29, 2019 at 05:23 PM, Steve Collins wrote:

I have tried pointing it to the directory containing Multipsk.exe
AFAIK you should point it to the directory where MultiPSK creates the QSO files.

73, Dick

Re: Display-Launcher updated - AERO

Steve Collins
 

Hi Mike

 

I’m probably missing something but can’t get DL to work. I’m not sure if I’m pointing it at the right directory. I have tried pointing it to the directory containing Multipsk.exe I’m running Windows 10 using sdr dongle and tuning in with SDR# and using stereo sounds.

 

73 Steve

 

 

 

Sent from Mail for Windows 10

 


From: multipsk@groups.io <multipsk@groups.io> on behalf of MadMike <virtualtrains@...>
Sent: Saturday, March 16, 2019 10:28:46 PM
To: multipsk@groups.io
Subject: [multipsk] Display-Launcher updated - AERO
 
I have updated AERO-Display so that it now correctly displays data from MultiPSK AERO when used with 10500baud signals. These signals from the Ground Stations to aircraft had a slightly different format to those at 600 and 1200 baud.

2. There is also a new version of AcarsDeco-Display included as the latest version of AcarsDeco2 has also changed its log file layout.

Download link is http://www.agenetools.com/downloads/DL-Updates.zip  - note that you also need the full version of the program installed, these are just updated .exe files.

Regards, Mike Simpson
South Penrith, NSW, Australia


Re: Display-Launcher - for MultiPSK

bob schippacase
 

Thank you for the info Sergio

Re: Display-Launcher - for MultiPSK

Sergio Sarabia
 

The power of the GS in its vast majority is 20 W. 19 nm is too much distance to receive GSIF, unless you rise to 1600 feet.

Re: #aero #aero

Richard
 

Good point Patrick.  I wasn't aware of that option.

thanks.

Re: Display-Launcher - for MultiPSK

Phil Walls
 

Thanks Mike did all that and the AV_3 Options does indeed show VDL2. Still no data is being read from the QSO file for ACARS/VDL2. I have no issues running the GMDSS module for example.

On Fri, Mar 29, 2019 at 9:14 AM MadMike <virtualtrains@...> wrote:
Hi Phil,

From looking at your screen shot, it appears that although you have selected VDL2 for Log Folder 1, you have not clicked on 'Confirm' to select it as the Display screen shows freq 136.9750 with mode set as ACARS.

You can check the file AV3_Options.txt and ensure that Line 16 shows VDL2 rather than ACARS and it should work OK.

Regards, Mike Simpson
South Penrith, NSW, Australia




--
We swear by the southern cross, to stand truly by each other and to fight to defend our rights and liberties- 1854

Re: #aero #aero

Patrick Lindecker
 

Richard,

 

RR for the interesting screenshot (nice signal).

Possibly, you can avoid to show your name and address, clicking on the menu “Configuration” item, option “Name and address not displayed…”.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Richard
Envoyé : jeudi 28 mars 2019 23:19
À : multipsk@groups.io
Objet : Re: [multipsk] #aero

 

Patrick,

Attached is a screen shot of Multipsk decoding AERO 10500bps with the setup described.


Richard


Attachments:




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Re: #aero #aero

Richard
 

Patrick,

Attached is a screen shot of Multipsk decoding AERO 10500bps with the setup described.


Richard


Re: Display-Launcher - for MultiPSK

MadMike
 

Hi Phil,

From looking at your screen shot, it appears that although you have selected VDL2 for Log Folder 1, you have not clicked on 'Confirm' to select it as the Display screen shows freq 136.9750 with mode set as ACARS.

You can check the file AV3_Options.txt and ensure that Line 16 shows VDL2 rather than ACARS and it should work OK.

Regards, Mike Simpson
South Penrith, NSW, Australia


Re: #aero #aero

Patrick Lindecker
 

Thanks for the information Richard,

 

>So it is an RTL-SDR and performs with Multipsk just like the others.
No just like the others. It seems better. I never have been able to decode 10500 bauds transmissions with a Patch antenna (the S/N ratio was too much low). But with a dish (but 1 m diameter) with an helical antenna at the center.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Richard
Envoyé : jeudi 28 mars 2019 21:50
À : m
ultipsk@groups.io
Objet : Re: [multipsk] #aero

 

Patrick,

It is another RTL2832U - R820T2 dongle similar to the v3 RTL-SDR.com device.  Nooelec claims that the heat dissipation is better due to heatsinks and pads and the TCXO is 0.5 ppm.  I wanted to try it for the L-band and it also has a feature that I find very convenient -- bias-T is always on.  

So it is an RTL-SDR and performs with Multipsk just like the others.

I meant to add in my earlier posting that the 10500bps AERO signals show a lower SNR than the 1200 or 600 signals which can make decoding difficult if antenna alignment is off or there is not an clear path to the satellite.

This is the same setup I use for monitoring EGC (SafetyNet).

Richard




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com