|
New releases of MULTIPSK (4.38.1) and Clock (1.11.6)
New releases of MULTIPSK (4.38.1) and Clock (1.11.6)
Pour les francophones: la version en français de ce message se trouve sur mon site (http://f6cte.free.fr). Il suffit de cliquer sur le lien
New releases of MULTIPSK (4.38.1) and Clock (1.11.6)
Pour les francophones: la version en français de ce message se trouve sur mon site (http://f6cte.free.fr). Il suffit de cliquer sur le lien
|
By
Patrick Lindecker
·
#1412
·
|
|
Re: New HFDL system table and a new Ground station in South Korea near Muan Int Airport (MWX RKJB)
Hello Dick,
Thanks for the information. I just have updated the code and HFDL_System_Table.txt with the new Muan station.
73
Patrick
Hello Dick,
Thanks for the information. I just have updated the code and HFDL_System_Table.txt with the new Muan station.
73
Patrick
|
By
Patrick Lindecker
·
#1411
·
|
|
New HFDL system table and a new Ground station in South Korea near Muan Int Airport (MWX RKJB)
As reported on the Yahoo HFDL group by Donnie several HFDL groundstations started using system table 51.
The most exiting thing is that apparently a new Ground Station is added.
I configured PC-HFDL
As reported on the Yahoo HFDL group by Donnie several HFDL groundstations started using system table 51.
The most exiting thing is that apparently a new Ground Station is added.
I configured PC-HFDL
|
By
Dick
·
#1410
·
|
|
Re: #aero
#aero
Well it looks like success at last, I see you're decoding ok. You might want to drop the audio down a bit, I see the volume light in one of your screen shots is red - they should all be green.
It's
Well it looks like success at last, I see you're decoding ok. You might want to drop the audio down a bit, I see the volume light in one of your screen shots is red - they should all be green.
It's
|
By
Paul Gulliver
·
#1409
·
|
|
Re: #aero Jaero too low signal strength
#aero
What are "other main freqs"? From which satellite? At what frequency?
18 dB is way above of what's required for a successful decode of 600 and 1200 bps channels. 4 dB is a little low indeed.
What I
What are "other main freqs"? From which satellite? At what frequency?
18 dB is way above of what's required for a successful decode of 600 and 1200 bps channels. 4 dB is a little low indeed.
What I
|
By
Tomasz Lemiech
·
#1407
·
|
|
Re: #aero Jaero too low signal strength
#aero
-----Original-Nachricht-----
Betreff: Re: [multipsk] #aero Jaero too low signal strength
Datum: 2019-01-15T17:36:29+0100
Von: "Paul Gulliver" <paulg1953@...>
An: "multipsk@groups.io"
-----Original-Nachricht-----
Betreff: Re: [multipsk] #aero Jaero too low signal strength
Datum: 2019-01-15T17:36:29+0100
Von: "Paul Gulliver" <paulg1953@...>
An: "multipsk@groups.io"
|
By
Roland Fechter
·
#1406
·
|
|
Re: #aero Jaero too low signal strength
#aero
-----Original-Nachricht-----
Betreff: Re: [multipsk] #aero Jaero too low signal strength
Datum: 2019-01-15T17:36:29+0100
Von: "Paul Gulliver" <paulg1953@...>
An: "multipsk@groups.io"
-----Original-Nachricht-----
Betreff: Re: [multipsk] #aero Jaero too low signal strength
Datum: 2019-01-15T17:36:29+0100
Von: "Paul Gulliver" <paulg1953@...>
An: "multipsk@groups.io"
|
By
Roland Fechter
·
#1405
·
|
|
Re: #aero Jaero too low signal strength
#aero
Ok, well I think first we need to apologise to Patrick for having this off topic conversation on his group that is dedicated to the support of MultiPSK
Roland, I think all your troubles lie with your
Ok, well I think first we need to apologise to Patrick for having this off topic conversation on his group that is dedicated to the support of MultiPSK
Roland, I think all your troubles lie with your
|
By
Paul Gulliver
·
#1404
·
|
|
Re: #aero Jaero too low signal strength
#aero
Thank you for your continued kind advice, Paul !
The EbNo of my Jaero stays at best at -4dB having gone through a great variety of frequences and bauds.
I see from your kind snaps
Thank you for your continued kind advice, Paul !
The EbNo of my Jaero stays at best at -4dB having gone through a great variety of frequences and bauds.
I see from your kind snaps
|
By
Roland Fechter
·
#1403
·
|
|
Re: #aero
#aero
Hi Roland,
This is a MultiPSK group, so why don't you use MultiPSK to decode your L-Band Aero messages, it works very well, and you can then pass the data to my freeware Display-Launcher to get a
Hi Roland,
This is a MultiPSK group, so why don't you use MultiPSK to decode your L-Band Aero messages, it works very well, and you can then pass the data to my freeware Display-Launcher to get a
|
By
agene
·
#1401
·
|
|
Re: #aero
#aero
you have to compile the aeroambe files!!! Follow the steps to the T in all three of these
you have to compile the aeroambe files!!! Follow the steps to the T in all three of these
|
By
Glen Ellenbart
·
#1400
·
|
|
Re: #aero
#aero
Hi Roland,
Just to try and help a bit more I've attached a couple of screenshots of how your SDR# and Jaero should be looking - in this case I'm decoding a 600bps signal.
The SDR# settings are USB
Hi Roland,
Just to try and help a bit more I've attached a couple of screenshots of how your SDR# and Jaero should be looking - in this case I'm decoding a 600bps signal.
The SDR# settings are USB
|
By
Paul Gulliver
·
#1399
·
|
|
Re: #aero
#aero
Thanks for your reply, Paul !
Yes, I DO use a virtual cable from my sdrsharp to Jaero. I never get all three green lights in Jaero - at most only volume, very rarely shortly signal and
Thanks for your reply, Paul !
Yes, I DO use a virtual cable from my sdrsharp to Jaero. I never get all three green lights in Jaero - at most only volume, very rarely shortly signal and
|
By
Roland Fechter
·
#1398
·
|
|
Re: #aero
#aero
Hi Roland,
just do not take notice of "Can't find or load all the libraries necessary for aeroambe. You will not get audio."
This is for information only and does
Hi Roland,
just do not take notice of "Can't find or load all the libraries necessary for aeroambe. You will not get audio."
This is for information only and does
|
By
Willi Rauschenberg
·
#1397
·
|
|
Re: #aero
#aero
Roland
Aeroamble is for voice messages only - it will not effect the decoding of standard L band or C band aero messages - I get the same error message but still manage to decode OK
Ignore the error
Roland
Aeroamble is for voice messages only - it will not effect the decoding of standard L band or C band aero messages - I get the same error message but still manage to decode OK
Ignore the error
|
By
Paul Gulliver
·
#1396
·
|
|
#aero
#aero
Hallo,
I am glad to report that thanks to my new Anjo Inmarsat Yagi and my NSDR Smartee dongle plus my barebone LNA I manage finally to
get aero signals. However Jaero refuses to decode these, saying
Hallo,
I am glad to report that thanks to my new Anjo Inmarsat Yagi and my NSDR Smartee dongle plus my barebone LNA I manage finally to
get aero signals. However Jaero refuses to decode these, saying
|
By
Roland Fechter
·
#1395
·
|
|
Re: MMSI List
Hmph. I failed to update my thumb drive MULTIPSK directory, which is why I was looking at an outdated file.
Thanks for setting me straight.
-Dave, NF2G
Hmph. I failed to update my thumb drive MULTIPSK directory, which is why I was looking at an outdated file.
Thanks for setting me straight.
-Dave, NF2G
|
By
David Stark
·
#1393
·
|
|
Re: SELCALL 32
Yes I agree! It appears the system started in 1956 and no update til now.
Yes I agree! It appears the system started in 1956 and no update til now.
|
By
Glen Ellenbart
·
#1392
·
|
|
SELCALL 32
Hello Glen,
Thanks for the post. It would be a good idea to have one identifier for one plane, thanks to this system (32 carriers instead 16, fully compatible with the old one).
So we will to
Hello Glen,
Thanks for the post. It would be a good idea to have one identifier for one plane, thanks to this system (32 carriers instead 16, fully compatible with the old one).
So we will to
|
By
Patrick Lindecker
·
#1390
·
|
|
Re: SELCALL Flightaware combo box
By the way here is some interesting reading on a proposal to update the SELCAL system soon!
https://www.asri.aero/selcal/selcal-32/
SELCAL 32 Expansion Program
Growth of SELCAL
While SELCAL is an
By the way here is some interesting reading on a proposal to update the SELCAL system soon!
https://www.asri.aero/selcal/selcal-32/
SELCAL 32 Expansion Program
Growth of SELCAL
While SELCAL is an
|
By
Glen Ellenbart
·
#1389
·
|