Date   

Re: Saving Parameters

Gilberto Rivera
 

That did the trick.

Thanks Patrick!


Re: Saving Parameters

Patrick Lindecker
 

Hello Gilberto,

 

First Click on the « Creation of a new configuration sub-directory » button.

 

You will see this:

 

Add “Test” (or other sub-directory, as for example “POCSAG”) after “…\CONFIGURATIONS\”

Click OK. You come back to the previous window.

 

Now, you can choose the sub-directory “Test “, then click “OK”. Parameters are saved.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Gilberto Rivera
Envoyé : mardi 27 avril 2021 23:01
À : multipsk@groups.io
Objet : [multipsk] Saving Parameters

 

I must admit I haven't read the manual thoroughly although, I did search.

Can't find out exactly what is saved when you click on "Save Parameters".

My understanding is that after clicking that, it should save all of your adjustments.

Now, when I click on "Save Parameters", I get the following

if I then, click "Ok", I get another pop up;

 

What can I do to correct this if, in essence, the warning is correct?

TIA.


Saving Parameters

Gilberto Rivera
 

I must admit I haven't read the manual thoroughly although, I did search.

Can't find out exactly what is saved when you click on "Save Parameters".

My understanding is that after clicking that, it should save all of your adjustments.

Now, when I click on "Save Parameters", I get the following

if I then, click "Ok", I get another pop up;

 

What can I do to correct this if, in essence, the warning is correct?

TIA.


Multipsk 4.45.2 translated to Spanish

Patrick Lindecker
 

Hello to all Spanish native speakers,

 

The 4.45.2 version of Multipsk has been completely translated to Spanish by Joachin (EB4Z), from French. The links to the translation file and to the manual (AIDE_PSK.CHM) in Spanish are on my Web site (http://f6cte.free.fr/Translation_files.htm).

 

Note that for a new CHM file (as here the AIDE_PSK.CHM file):

 

"

Sometimes .CHM files are flagged (by Windows) as downloaded from an untrusted source such as the Internet.

 

To resolve this issue, carry out the following steps:

 

1.       Right-click the .CHM file and choose Properties

 

2.       On the General tab, click the button labeled "Unblock"

 

3.       Click OK

"

 

73

Patrick

 

 

 


Re: CW QRP mode problem ?

Patrick Lindecker
 

Hello Thierry,

 

You are right. I will fix this.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Thierry via groups.io
Envoyé : mercredi 21 avril 2021 11:54
À : multipsk@groups.io
Objet : [multipsk] CW QRP mode problem ?

 

Hello Patrick and everyone,

In help file I can read that for non licensed version the "QRP mode" is available for 10 min. Nevertheless, a friend of mine who use v4.45 tried this function and but 2 second later, he got this information windows

So as I tried myself, using version 4.52.2, disable my licence and I got the same behaviour.
My understanding is there is something wrong with this 10min try with non licensed version ?

Thanks in advance,

Thierry


CW QRP mode problem ?

Thierry
 

Hello Patrick and everyone,

In help file I can read that for non licensed version the "QRP mode" is available for 10 min. Nevertheless, a friend of mine who use v4.45 tried this function and but 2 second later, he got this information windows


So as I tried myself, using version 4.52.2, disable my licence and I got the same behaviour.
My understanding is there is something wrong with this 10min try with non licensed version ?

Thanks in advance,

Thierry


Re: IC7300 via DXCommander: any way to specify digital mode?

Philip
 

Update your 7300 to the new firmware V1.40, and setup a profile for Multipsk 
G7JUR


New release of MULTIPSK (4.45.2) #multipsk

Patrick Lindecker
 

New release of MULTIPSK (4.45.2)

 

Pour les francophones: la version en français de ce message se trouve sur mon site (http://f6cte.free.fr). Il suffit de cliquer sur le lien "Principales modifications (courriel avertissant de la sortie de la nouvelle version)".


Hello to all Ham and SWL,

 

The new release of MultiPSK (4.45.2) is on my Web site (http://f6cte.free.fr/index_anglais.htm).
The mirror site is Earl's, W8BR: https://www.paazig.net/f6cte/MULTIPSK_setup.exe

The MD5 signature of the downloaded MULTIPSK_setup.exe file to, possibly, check (with WinMD5 for example), that the downloading works without error, is equal to:

e39e00b33097e5b45d60d13970b0bd97

Multipsk associated to Clock are freeware programs but with functions submitted to a licence (by user key).

 

The different improvements of MULTIPSK 4.45.2 are the following:

 

·                     Under the command "Tune+AF",  the Tune panel gives the possibility to make work an AF generator with an adjustable noise level. With the Multipsk tool "Spectrum analyser", this generator can be used to test an AF filter, for example:
AF generator ---> AF filter to test ---> Spectrum analyser.
This function is only available for licencied copies.

·                     Addition of the "No duplicate" option in POGSAG, so as not to display the successive repetitions of the same message.

·                     Update of the Shipdata.txt file (for the GMDSS and AIS modes). Thanks to Andy DL1DXX.

·                     Update of the VDL2_Ground_Stations.txt (for the VDL2 mode). Thanks to Sergio.

 

Note about translation of Multipsk.exe and Clock .exe:  the 4.45.1 version of Multipsk has been translated to Spanish by Joachin (EB4Z), from French.

See: http://f6cte.free.fr/Translation_files.htm.

 

 

73

Patrick

 

 

 

 


Re: :"Level" field shows 0% or 1%

Patrick Lindecker
 

Hello Dave,

 

The minimum is about 10 % (with the signal to receive). Below 1 %, the signal is mixed with a digital noise due to the sampling process, so the Signal to Noise ratio degrades…

It seems curious and not classical to remain with a residual level. Normally the signal increases linearly with the level adjusted on the Windows mixer (microphone).

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de D Grubbs via groups.io
Envoyé : dimanche 18 avril 2021 19:05
À : multipsk@groups.io
Objet : [multipsk] :"Level" field shows 0% or 1%

 

On the  RX/TX screen, the "Level" field shows only 0% or1%, never higher.

What should the  ideal level show?
I have adjusted  the RX level on SignalLink device and Sound Levels in the Windows Mixer, but nothing changes the "level".

What is the next step?

Thank you.

Dave N4EF 


:"Level" field shows 0% or 1%

D Grubbs
 

On the  RX/TX screen, the "Level" field shows only 0% or1%, never higher.

What should the  ideal level show?
I have adjusted  the RX level on SignalLink device and Sound Levels in the Windows Mixer, but nothing changes the "level".

What is the next step?

Thank you.

Dave N4EF 


Re: Multipsk 4.45.2 Test version 1 - AF generator

Patrick Lindecker
 

Thanks for the report Thierry.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Thierry via groups.io
Envoyé : mardi 13 avril 2021 17:27
À : multipsk@groups.io
Objet : Re: [multipsk] Multipsk 4.45.2 Test version 1 - AF generator

 

It is working now perfectly, thanks Patrick

73 de Thierry

Le 08/04/2021 à 12:13, Patrick Lindecker a écrit :

·                     In CW, bug about the "QRP" button fixed


Re: Multipsk 4.45.2 Test version 1 - AF generator

Thierry
 

It is working now perfectly, thanks Patrick

73 de Thierry

Le 08/04/2021 à 12:13, Patrick Lindecker a écrit :
·                     In CW, bug about the "QRP" button fixed


New Video - Thor on MultiPSK

Patrick Lindecker
 

Hello to all,

 

For information, Jack proposes a short new video demonstrating receiving THOR 8 (a rare but robust mode) using MultiPSK: https://youtu.be/exKVrHffPF8

Thanks to him.

 

73

Patrick


Re: Multipsk 4.45.2 Test version 1 - AF generator

George Konstantopoulos (Mobile)
 

Dear Patrick Hello,
lately when i select Satellite menu lately i get violation d'access, and Orbcom, Argos Menu doesn't work, started with 4.45.1 version, at the past no problem at all, any idea or suggestions ? 
i attached a prt sc in order to get the idea and the reference of the internal address conflict as the pop up box indicates
many thanks in advance 

73s
George 
SY1COP / KM17vx 


Multipsk 4.45.2 Test version 1 - AF generator

Patrick Lindecker
 

Hello to all,

 

This test version 1 mainly proposes a very simple AF generator: http://f6cte.free.fr/MULTIPSK_4_45_2_test_version_1.zip

 

Paste this address in your Internet Explorer or equivalent. Download the file.
Extract the ZIP file and replace the “official” Multipsk.exe with this test version. Before, make a copy of the “official” Multipsk.exe, in case of. It is also proposed new help manuals (chm files).

 

The different improvements of MULTIPSK 4.45.2 are the following:

 

·                     Under the command "Tune+AF",  the Tune panel gives the possibility to make work an AF generator with an adjustable noise level. With the Multipsk tool "Spectrum analyser", this generator can be used to test an AF filter, for example:
AF generator ---> AF filter to test ---> Spectrum analyser.
This function is only available for licencied copies.

·                     Addition of the "No duplicate" option in POGSAG, so as not to display the successive repetitions of the same message.

·                     In CW, bug about the "QRP" button fixed

 

Thanks for reports on this forum.

 

73

Patrick

 

 


Re: libacars 2.1.3

bob schippacase
 

Hi Mike 

Tried here with copy over version but no luck
Didn’t decode anything. May be due to the way I copied 
the files. I did see suggested to be run separated from 
previous version but haven’t tried that yet.
Any luck with you? 


Violation d'access

George Konstantopoulos (Mobile)
 

Dear Patrick, i did a re-installation for the latest version and unfortunately i get this screen and the Sattelite pop us is not working properly and it is changing language from English to French, any idea what i did wrong ? 


Re: Starting Multipsk with a chosen "jeux de séquence"

Thierry
 

Thank you very much for your advice Patrick,

73 de Thierry

Le 29/03/2021 à 20:48, Patrick Lindecker a écrit :

Hello Thierry,

 

It is reminded that 2 sets of 12 sequences form a pair (so 24 sequences by pair). The main pair (primary one) is the #1. The secondary pairs (#2 to #10) permit 24*9 additive sequences (for a total of 240 sequences).

 

 

>I have different "paire de jeux de séquences" and would like to start Multipsk with another "Paire", not "Paire 1".

By default, the primary is the #1. You must manage your sequences so that the 24 main sequences pertain to the primary pair (#1).

 

73

Patrick

 

For information, extract of the manual

 

………………………………………………

Management of the 24 Multipsk sequences (for a possible user programmation)

1) A sequence is stored as a Text file in a type Fx.SER file, x being the sequence number from 1 to 24. The maximum length of a sequence is 5000 characters. It can be put, of course, as numerous carriage returns as the user wishes (in the limit of 5000 characters).

2) Each sequence can have a name of up to 10 letters/numerals.

The file of the sequence name is Nx.SER type, with x=sequence number from 1 to 24.

3) The color of the name of sequence can be chosen. Black is the default color.

The color is represented by a figure:

  • 1 for black
  • 2 for brown
  • 3 for blue
  • 4 for green
  • 5 for white
  • 6 for red
  • 7 for purple
  • 8 for yellow

This color, as a figure, is stored in the text file CONFPSER.SER: the character 306+1=307 for the sequence 1 up to the character 306+24=330 for the sequence 24.

Example: with the character[318]=CHR(3) the name of the sequence 12 will be displayed in blue.

Management of the 240 Multipsk sequences

On clicking on the button "Sets list" (RX/TX screen), it is opened a window which name is "Pairs of sets of 12 sequences (macros) management". In this window, the pair 1 corresponds to the 2 basic sets of 12 sequences (macros). Now, it is possible to select a new pair of sets of 12 sequences (Pair 2 to Pair 10) and to edit each sequence (buttons 1 to 24).
The user can give to each pair a name of 31 characters maximum. Finally, the user disposes of 10 x 24=240 sequences (macros). Each macro is 5000 characters maximum.

 

-----Message d'origine-----
De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Thierry via groups.io
Envoyé : lundi 29 mars 2021 11:20
À : multipsk@groups.io
Objet : [multipsk] Starting Multipsk with a chosen "jeux de séquence"

 

Hi everyone,

 

I am sure there is a way but still don't find it.

I have different "paire de jeux de séquences" and would like to start

Multipsk with another "Paire", not "Paire 1".

How can I do that ?

 

Thank you in advance

 

Thierry

 

 





Re: How do I do unproto mode in ALE? #ALE #multipsk

Patrick Lindecker
 

Hello,

 

>Please consider re-adding this feature again in the future.

This mode was not used at all, and moreover, it made complex the ALE modes family. So I separated conventional ALE from ARQ FAE and removed Unproto. It’s definitive.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de benhut1@...
Envoyé : mardi 30 mars 2021 11:54
À : multipsk@groups.io
Objet : Re: [multipsk] How do I do unproto mode in ALE? #ALE #multipsk

 

That's very unfortunate. I really liked that feature. I used it (along with other modes) frequently for my own experiments (not even in ham radio) via sound card communication, sometimes over just a wire from computer, and other times over a laser beam from one computer to a photo diode on another computer. Please consider re-adding this feature again in the future.


Re: How do I do unproto mode in ALE? #ALE #multipsk

benhut1@...
 

That's very unfortunate. I really liked that feature. I used it (along with other modes) frequently for my own experiments (not even in ham radio) via sound card communication, sometimes over just a wire from computer, and other times over a laser beam from one computer to a photo diode on another computer. Please consider re-adding this feature again in the future.

241 - 260 of 4746