Date   

Re: GMDSS Coast stations update

Bilgediver
 

HI Peter.

You must remember that there is not much GMDSS traffic now on HF/MF as most ships have gone over to Satellite systems. The GMDSS operates on specific frequencies world wide on both VHF and short wave. If you live near the coast you will find GMDSS traffic on marine VHF channel 70  156.525. This includes both Emergency and ordinary ship to ship traffic and the DSC message will be followed by a call on CH 16 in the case of an emergency though the coastguard can swith the ship station to CH67 and Ship to ship DSC calls will be followed by a voice call on a frequency selected by the called station. You might see this information on the screen!!!

There are specific short wave frequencies for GMDSS on Short Wave and again these frequencies are the same world wide. Each DSC frequency is accompanied by a voice frequency. The procedure is that a DSC signal is sent and this is followed by a Voice call on the paired frequency

There are many web pages that show this process and frequencies such as the one below.  Happy hunting.


John H.


https://www.egmdss.com/gmdss-courses/mod/page/view.php?id=2262







Re: GMDSS Coast stations update

Patrick Lindecker
 

Hello Peter,

Thanks for the update. It is now integrated into Multipsk.

73
Patrick

-----Message d'origine-----
De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de peter via groups.io
Envoyé : mardi 6 octobre 2020 20:49
À : multipsk@groups.io
Objet : [multipsk] GMDSS Coast stations update

Hi Patrick,

Been a while since I last updated the MULTIPSK GMDSS Coast station file, so here is my latest.

73,

Peter g3ufi


---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus


Re: GMDSS Coast stations update

Stephen Ambrose
 

Hi Peter

Im new to all this so would you mind telling me how you monitor the coastal stations

Thanks
Steve

-----Original Message-----
From: multipsk@groups.io [mailto:multipsk@groups.io] On Behalf Of peter via groups.io
Sent: 06 October 2020 19:50
To: multipsk@groups.io
Subject: [multipsk] GMDSS Coast stations update

Hi Patrick,

Been a while since I last updated the MULTIPSK GMDSS Coast station file, so here is my latest.

73,

Peter g3ufi


Scanned by McAfee and confirmed virus-free.
Find out more here: https://bit.ly/2zCJMrO


GMDSS Coast stations update

peter
 

Hi Patrick,

Been a while since I last updated the MULTIPSK  GMDSS Coast station file, so here is my latest.

73,

Peter     g3ufi


Re: No sound card and access violation

Patrick Lindecker
 

Hello Guy,

 

This error message is in fact a Windows message, which does not see any sound card. Normally, a connector must be plugged in the input sound card.

If you have a USB sound card, plug it and see if it works with it.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Guy G4DWV 4X1LT
Envoyé : lundi 5 octobre 2020 02:25
À : multipsk@groups.io
Objet : Re: [multipsk] No sound card and access violation

 

Hi Patrick,
I do not fully understand your first comment above. From what I think it means, nothing needs to be plugged in and my sound cards are being used by other programs without issue].
Regarding the second comment, my soundcards are not deactivated in windows.
The sound card I need to use is the one in my IC-7300.
--
73 de Guy G4DWV 4X1LT




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com



Re: No sound card and access violation

Guy G4DWV 4X1LT
 
Edited

Hi Patrick,
Thanks for the info. That helped me figure what I did wrong.
--
73 de Guy G4DWV 4X1LT


Re: Multipsk Future modes

brad@...
 

Good day Patrick

Thank you for the update .


regards


Bradley

 


On 2020-10-03 22:12, Patrick Lindecker wrote:

Hello Bradley,

>Can you let me know if there are any plans to add Vara chat ,terminal or other vara P2P modes such as ROS  to Multipsk .

No sorry, I don't plan to add such modes. At the moment, I'm on the demodulation of LRPT (METEOR M2), which is going to keep me busy for a while.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de brad@...
Envoyé : samedi 3 octobre 2020 20:55
À : multipsk@groups.io
Cc : Patrick Lindecker
Objet : [multipsk] Multipsk Future modes

 

Good day Patrick 

Can you let me know if there are any plans to add Vara chat ,terminal or other vara P2P modes such as ROS  to Multipsk .

With all the various ham software out there - I continuous try and always come back to Multipsk as my baseline .

Thanks in advance

 

Bradley Glen

ZS5BG

 

 

 

On 2020-10-03 20:41, Patrick Lindecker wrote:

Hello Guy,

 

There are two possibilities :

·         either there is nothing connected to your sound-card input (and you must plug some connector),

·         or your sound-card is deactivated at Windows level (and you must re-activate it).

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Guy G4DWV 4X1LT
Envoyé : samedi 3 octobre 2020 17:41
À : multipsk@groups.io
Objet : [multipsk] No sound card and access violation

 

Hi,
I have just installed Multipsk. On loading I get the errors I have attached here. The access violation takes several clicks to get rid of it. How do I get Multipsk able to load?
Thanks
--
73 de Guy G4DWV 4X1LT

 


Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com

 

 





Re: Multipsk Future modes

Patrick Lindecker
 

Hello Bradley,

>Can you let me know if there are any plans to add Vara chat ,terminal or other vara P2P modes such as ROS  to Multipsk .

No sorry, I don’t plan to add such modes. At the moment, I’m on the demodulation of LRPT (METEOR M2), which is going to keep me busy for a while.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de brad@...
Envoyé : samedi 3 octobre 2020 20:55
À : multipsk@groups.io
Cc : Patrick Lindecker
Objet : [multipsk] Multipsk Future modes

 

Good day Patrick 

Can you let me know if there are any plans to add Vara chat ,terminal or other vara P2P modes such as ROS  to Multipsk .

With all the various ham software out there - I continuous try and always come back to Multipsk as my baseline .

Thanks in advance

 

Bradley Glen

ZS5BG

 

 

 

On 2020-10-03 20:41, Patrick Lindecker wrote:

Hello Guy,

 

There are two possibilities :

·         either there is nothing connected to your sound-card input (and you must plug some connector),

·         or your sound-card is deactivated at Windows level (and you must re-activate it).

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Guy G4DWV 4X1LT
Envoyé : samedi 3 octobre 2020 17:41
À : multipsk@groups.io
Objet : [multipsk] No sound card and access violation

 

Hi,
I have just installed Multipsk. On loading I get the errors I have attached here. The access violation takes several clicks to get rid of it. How do I get Multipsk able to load?
Thanks
--
73 de Guy G4DWV 4X1LT

 


Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com

 

 


Multipsk Future modes

brad@...
 

Good day Patrick 

Can you let me know if there are any plans to add Vara chat ,terminal or other vara P2P modes such as ROS  to Multipsk .

With all the various ham software out there - I continuous try and always come back to Multipsk as my baseline .

Thanks in advance


Bradley Glen

ZS5BG


 


On 2020-10-03 20:41, Patrick Lindecker wrote:

Hello Guy,

 

There are two possibilities :

·         either there is nothing connected to your sound-card input (and you must plug some connector),

·         or your sound-card is deactivated at Windows level (and you must re-activate it).

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Guy G4DWV 4X1LT
Envoyé : samedi 3 octobre 2020 17:41
À : multipsk@groups.io
Objet : [multipsk] No sound card and access violation

 

Hi,
I have just installed Multipsk. On loading I get the errors I have attached here. The access violation takes several clicks to get rid of it. How do I get Multipsk able to load?
Thanks
--
73 de Guy G4DWV 4X1LT




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com





Re: No sound card and access violation

Patrick Lindecker
 

Hello Guy,

 

There are two possibilities :

·         either there is nothing connected to your sound-card input (and you must plug some connector),

·         or your sound-card is deactivated at Windows level (and you must re-activate it).

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Guy G4DWV 4X1LT
Envoyé : samedi 3 octobre 2020 17:41
À : multipsk@groups.io
Objet : [multipsk] No sound card and access violation

 

Hi,
I have just installed Multipsk. On loading I get the errors I have attached here. The access violation takes several clicks to get rid of it. How do I get Multipsk able to load?
Thanks
--
73 de Guy G4DWV 4X1LT




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com



No sound card and access violation

Guy G4DWV 4X1LT
 

Hi,
I have just installed Multipsk. On loading I get the errors I have attached here. The access violation takes several clicks to get rid of it. How do I get Multipsk able to load?
Thanks
--
73 de Guy G4DWV 4X1LT


Re: #Beginner #multipsk - Links to SDRplay #Beginner #multipsk

Aaron Cairns
 

Thanks Guys, 👍


On Wed 30 Sep 2020, 15:01 mike agner, <ka3jjz@...> wrote:
Mike, here is the lowdown on the TCP/IP feature - perhaps you can do a video on it....

https://wiki.radioreference.com/index.php/Connect_the_SDRPlay_RSPs_via_TCP_IP_to_Multipsk

Mike KA3JJZ



Re: #Beginner #multipsk - Links to SDRplay #Beginner #multipsk

mike agner
 

Mike, here is the lowdown on the TCP/IP feature - perhaps you can do a video on it....

https://wiki.radioreference.com/index.php/Connect_the_SDRPlay_RSPs_via_TCP_IP_to_Multipsk

Mike KA3JJZ


Re: #Beginner #multipsk - Links to SDRplay #Beginner #multipsk

Mike
 

Of course he doesn't know about the tcp/ip setup,

Yes, you are correct.

Mike-KD2KOG


Re: #Beginner #multipsk #Beginner #multipsk

Patrick Lindecker
 

Thanks Fred, Paul and Mike,

 

Yes it seems possible. Nice.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Fred Albertson
Envoyé : lundi 28 septembre 2020 22:35
À : multipsk@groups.io
Objet : Re: [multipsk] #Beginner #multipsk

 

Hi Patrick,

In the SDRUno manual (Main screen|Opt | User Manual),  page 49, it says that it does what you request, I think.

Hope this helps.

Great day,

Fred




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com



Re: #Beginner #multipsk #Beginner #multipsk

Fred Albertson
 

Hi Patrick,

In the SDRUno manual (Main screen|Opt | User Manual),  page 49, it says that it does what you request, I think.

Hope this helps.

Great day,

Fred


Re: #Beginner #multipsk #Beginner #multipsk

Paul Gulliver
 

Patrick,

It might be worth your while joining this group https://groups.io/g/GEO-Subscribers

I know some of the members receive Meteor-M2 and other weather sats and may be able to answer your question and if you get the decode working (as I'm sure you will) might get some free publicity for your program :-)

Paul

On 28/09/2020 at 11:27, Patrick Lindecker <f6cte@...> wrote:

Mike,

 

Speaking on VAC, as I’m working on LRPT demodulation (METEOR-M2), do you think possible for the UNO to send through a VAC an IQ data flow  (i.e in stereo) 16 bits at 192 KHz?

 

73

Patrick

 



Re: #Beginner #multipsk #Beginner #multipsk

mike agner
 

Patrick, I have no idea....sorry...Mike


Re: #Beginner #multipsk #Beginner #multipsk

Patrick Lindecker
 

Mike,

 

Speaking on VAC, as I’m working on LRPT demodulation (METEOR-M2), do you think possible for the UNO to send through a VAC an IQ data flow  (i.e in stereo) 16 bits at 192 KHz?

 

73

Patrick

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de mike agner
Envoyé : lundi 28 septembre 2020 02:58
À : multipsk@groups.io
Objet : Re: [multipsk] #Beginner #multipsk

 

Actually he does mention (briefly) that you need to use VAC or VB Cable (and you can see this in the PDF version of the video);

https://www.sdrplay.com/docs/SDRuno_ACARS.pdf

However still on the catalog, there are 2 videos on how to set up VAC part 1 is here

https://www.youtube.com/watch?v=ZF86cK5vukY&feature=youtu.be&ab_channel=SDRplayHamGuides

and the 2nd part which directly mentions MultiPSK

https://www.youtube.com/watch?v=1mRoHrsP9Ek&feature=youtu.be&ab_channel=SDRplaySoftwareDefinedRadioReceiver

I totally agree, though, that if the presenter mentions using packages like these, the links for how to set them up from the catalog should be included.  

There's even a video with a more general presentation on how to set up MultiPSK -  

https://www.youtube.com/watch?v=tnqfJhsvGFA&feature=youtu.be&ab_channel=SDRplayHamGuides

Of course he doesn't know about the tcp/ip setup, but this is what he has in his catalog.  A little digging will undoubtedly find more

Mike




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com



Re: #Beginner #multipsk - Links to SDRplay #Beginner #multipsk

Patrick Lindecker
 

Hello Mike and all,

 

For the beginner , there is, below, all the necessary to use Multipsk (or other decoding program) with a SDRplay receiver. Precious message!

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de mike agner
Envoyé : lundi 28 septembre 2020 02:58
À : multipsk@groups.io
Objet : Re: [multipsk] #Beginner #multipsk

 

Actually he does mention (briefly) that you need to use VAC or VB Cable (and you can see this in the PDF version of the video);

https://www.sdrplay.com/docs/SDRuno_ACARS.pdf

However still on the catalog, there are 2 videos on how to set up VAC part 1 is here

https://www.youtube.com/watch?v=ZF86cK5vukY&feature=youtu.be&ab_channel=SDRplayHamGuides

and the 2nd part which directly mentions MultiPSK

https://www.youtube.com/watch?v=1mRoHrsP9Ek&feature=youtu.be&ab_channel=SDRplaySoftwareDefinedRadioReceiver

I totally agree, though, that if the presenter mentions using packages like these, the links for how to set them up from the catalog should be included.  

There's even a video with a more general presentation on how to set up MultiPSK -  

https://www.youtube.com/watch?v=tnqfJhsvGFA&feature=youtu.be&ab_channel=SDRplayHamGuides

Of course he doesn't know about the tcp/ip setup, but this is what he has in his catalog.  A little digging will undoubtedly find more

Mike




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


1001 - 1020 of 4529