Date   
MultiPSK and Windows

Pieter <info@...>
 

Ladies and gentlemen, with every update of Windows the settings of the microphone change (in connection with your privacy). And the input and / or output port of your soundcard will also be reset. I use Voice Meeter Banana and have to reset Windows so that he sees the VoiceMeeter In and Output as the default device.

Re: MultiPSK Unusable #multipsk

Andrew OBrien
 

I wonder if the old “fix” from Win7 days will work ? I vaguely remember having the “no sound card “ issue several years ago and Patrick suggested I simply insert a patch cord in to my lap top’s audio in jack. After removing the inert patch cable Mutipsk recognized my sound card and the “trick “ was not needed anymore. 

Andy


On Dec 1, 2019, at 7:56 PM, Martin Van Mierlo <mwmierlo@...> wrote:


Hi Phil,
I use Multi PSK for al long time. Windows 7 and windows 10 no problem at al.......For a time a go i used an Medion laptop after upgrade version  1607 to 1803 NO SOUND CARD !!!  on the Medion.!!!  On the new lenovo version 1903 no problem's at all..  The problem is NOT MULTI PSK BUT WINDOWS....... I think drivers,drivers and again drivers !!! In my opinon is Multi Psk.a very good and handsome program

73, Martin Pd0ljz

Op zo 1 dec. 2019 22:55 schreef Patrick Lindecker <f6cte@...>:
Hello Tom,

>Impossible working because there is no sound card.
It means that either none jack is connected to the sound card input or Windows does not detect any sound card (perhaps due to a Windows 10 update which has deactivated your internal sound card, see previous messages on this subject, on this forum).

Multipsk (32 bits application) works with 32 or 64 bits PCs.

73
Patrick

-----Message d'origine-----
De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Tom
Envoyé : dimanche 1 décembre 2019 13:31
À : multipsk@groups.io
Objet : Re: [multipsk] MultiPSK Unusable #multipsk

hi MultiPSK friends,
I'd run MultiPSK since years but when moving to Win10 I have the same issue like some others here: 'Impossible working because there is no sound card.' and second error message: 'Violation d' accés á làdresse 72E53940. Lecture de làdresse 72E53940' when starting MultiPSK. '
Both on Win10-32bit and Win10-64bit on different PC's... -But in background (task manager) MultiPSK.exe(32) is running. Is there a package for 64?
I tried several times installation, with and without 'Install as Admin' -always the same error.
Did also what Jim proposed -no misconfiguration of Win10 detected.

I'm lost now...
73 de Tom, DG6TOM, KC6TOM

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2719): https://groups.io/g/multipsk/message/2719
Mute This Topic: https://groups.io/mt/59987565/1658298
Mute #multipsk: https://groups.io/mk?hashtag=multipsk&subid=3643149
-=-=-
The Multi Mode Digital Software for Amateur Radio, SWL, Utility DXing, Aircraft and ship monitoring and more!   
http://f6cte.free.fr/index_anglais.htm
Moderated by Andy K3UK and Gary K7EK
-=-=-
Group Owner: multipsk+owner@groups.io
Unsubscribe: https://groups.io/g/multipsk/leave/3643149/1695504695/xyzzy  [mwmierlo@...]
-=-=-=-=-=-=-=-=-=-=-=-
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2720): https://groups.io/g/multipsk/message/2720
Mute This Topic: https://groups.io/mt/59987565/178126
Mute #multipsk: https://groups.io/mk?hashtag=multipsk&subid=3343101
-=-=-
The Multi Mode Digital Software for Amateur Radio, SWL, Utility DXing, Aircraft and ship monitoring and more!   <br /><a href="http://f6cte.free.fr/index_anglais.htm" target="_blank">http://f6cte.free.fr/index_anglais.htm</a><br />Moderated by Andy K3UK and Gary K7EK
-=-=-
Group Owner: multipsk+owner@groups.io
Unsubscribe: https://groups.io/g/multipsk/leave/3343101/1971150176/xyzzy  [andrewobrie@...]
-=-=-=-=-=-=-=-=-=-=-=-

Re: MultiPSK Unusable #multipsk

Martin Van Mierlo
 

Hi Phil,
I use Multi PSK for al long time. Windows 7 and windows 10 no problem at al.......For a time a go i used an Medion laptop after upgrade version  1607 to 1803 NO SOUND CARD !!!  on the Medion.!!!  On the new lenovo version 1903 no problem's at all..  The problem is NOT MULTI PSK BUT WINDOWS....... I think drivers,drivers and again drivers !!! In my opinon is Multi Psk.a very good and handsome program

73, Martin Pd0ljz

Op zo 1 dec. 2019 22:55 schreef Patrick Lindecker <f6cte@...>:

Hello Tom,

>Impossible working because there is no sound card.
It means that either none jack is connected to the sound card input or Windows does not detect any sound card (perhaps due to a Windows 10 update which has deactivated your internal sound card, see previous messages on this subject, on this forum).

Multipsk (32 bits application) works with 32 or 64 bits PCs.

73
Patrick

-----Message d'origine-----
De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Tom
Envoyé : dimanche 1 décembre 2019 13:31
À : multipsk@groups.io
Objet : Re: [multipsk] MultiPSK Unusable #multipsk

hi MultiPSK friends,
I'd run MultiPSK since years but when moving to Win10 I have the same issue like some others here: 'Impossible working because there is no sound card.' and second error message: 'Violation d' accés á làdresse 72E53940. Lecture de làdresse 72E53940' when starting MultiPSK. '
Both on Win10-32bit and Win10-64bit on different PC's... -But in background (task manager) MultiPSK.exe(32) is running. Is there a package for 64?
I tried several times installation, with and without 'Install as Admin' -always the same error.
Did also what Jim proposed -no misconfiguration of Win10 detected.

I'm lost now...
73 de Tom, DG6TOM, KC6TOM

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2719): https://groups.io/g/multipsk/message/2719
Mute This Topic: https://groups.io/mt/59987565/1658298
Mute #multipsk: https://groups.io/mk?hashtag=multipsk&subid=3643149
-=-=-
The Multi Mode Digital Software for Amateur Radio, SWL, Utility DXing, Aircraft and ship monitoring and more!   
http://f6cte.free.fr/index_anglais.htm
Moderated by Andy K3UK and Gary K7EK
-=-=-
Group Owner: multipsk+owner@groups.io
Unsubscribe: https://groups.io/g/multipsk/leave/3643149/1695504695/xyzzy  [mwmierlo@...]
-=-=-=-=-=-=-=-=-=-=-=-

Re: MultiPSK Unusable #multipsk

Patrick Lindecker
 

Hello Tom,

Impossible working because there is no sound card.
It means that either none jack is connected to the sound card input or Windows does not detect any sound card (perhaps due to a Windows 10 update which has deactivated your internal sound card, see previous messages on this subject, on this forum).

Multipsk (32 bits application) works with 32 or 64 bits PCs.

73
Patrick

-----Message d'origine-----
De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Tom
Envoyé : dimanche 1 décembre 2019 13:31
À : multipsk@groups.io
Objet : Re: [multipsk] MultiPSK Unusable #multipsk

hi MultiPSK friends,
I'd run MultiPSK since years but when moving to Win10 I have the same issue like some others here: 'Impossible working because there is no sound card.' and second error message: 'Violation d' accés á làdresse 72E53940. Lecture de làdresse 72E53940' when starting MultiPSK. '
Both on Win10-32bit and Win10-64bit on different PC's... -But in background (task manager) MultiPSK.exe(32) is running. Is there a package for 64?
I tried several times installation, with and without 'Install as Admin' -always the same error.
Did also what Jim proposed -no misconfiguration of Win10 detected.

I'm lost now...
73 de Tom, DG6TOM, KC6TOM

Re: MultiPSK Unusable #multipsk

Ralf Bender
 

Hi Tom,

I work with Multipsk under Win 10 Pro 64-bit without any problems. Like some others. 

Did you try to run it as administrator?  Not only the installation.

  • Kill all background running tasks of Multipsk or make a reboot. 
  • Right-click the program and go to Properties –> Shortcut.
  • Go to Advanced.
  • Check Run as Administrator checkbox. Run as administrator option for program.
Maybe this helps to get Multipsk run on your pc's.

73 
Ralf 

Re: MultiPSK Unusable #multipsk

Tom
 

hi MultiPSK friends,
I'd run MultiPSK since years but when moving to Win10 I have the same issue like some others here: 'Impossible working because there is no sound card.' and second error message: 'Violation d' accés á làdresse 72E53940. Lecture de làdresse 72E53940' when starting MultiPSK. '
Both on Win10-32bit and Win10-64bit on different PC's... -But in background (task manager) MultiPSK.exe(32) is running. Is there a package for 64?
I tried several times installation, with and without 'Install as Admin' -always the same error.
Did also what Jim proposed -no misconfiguration of Win10 detected.

I'm lost now...
73 de Tom, DG6TOM, KC6TOM

Re: "server address is incorrect" in Traffic panel

Ralf Bender
 

Think I fixed it now.
73 Ralf

Re: "server address is incorrect" in Traffic panel

Patrick Lindecker
 

Hello Ralf,

 

I confirm that your WEB address works well as server (but it does not like the ANSI “°” ☺).

Nice to have a second server.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Ralf Bender
Envoyé : dimanche 1 décembre 2019 20:47
À : multipsk@groups.io
Objet : Re: [multipsk] "server address is incorrect" in Traffic panel

 

Got it Online :-)

You can reach it, if you change the website in the Mulitpsk configuration from
http://rg16.free.fr/
to 
https://multipsk.r-bender.de/

73
Ralf

Re: "server address is incorrect" in Traffic panel

Ralf Bender
 

Got it Online :-)

You can reach it, if you change the website in the Mulitpsk configuration from
http://rg16.free.fr/
to 
https://multipsk.r-bender.de/

73
Ralf

Re: "server address is incorrect" in Traffic panel

Ralf Bender
 

Many thanks Patrick. The files arrived.
I can also confirm that your site is back and works like before. 
73 Ralf

Re: "server address is incorrect" in Traffic panel

Jay Novello
 

Great!  Thanks, Patrick!  Confirmed as working correctly here.

On Dec 1, 2019, at 12:36 PM, Patrick Lindecker <f6cte@...> wrote:

Ralf,  the packet of 60 files of the Multipsk server has been sent to your personal address.
Jay, the Free server has been fixed (I just checked it).
 
73
Patrick
 
 
De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Ralf Bender
Envoyé : dimanche 1 décembre 2019 13:29
À : multipsk@groups.io
Objet : Re: [multipsk] "server address is incorrect" in Traffic panel
 
Hi Patrick,

may I have the server files for all modes. 
Just want take a look and maybe give it a try.

Regards 
Ralf 
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2711): https://groups.io/g/multipsk/message/2711
Mute This Topic: https://groups.io/mt/64413910/389386
-=-=-
The Multi Mode Digital Software for Amateur Radio, SWL, Utility DXing, Aircraft and ship monitoring and more!   <br /><a href="http://f6cte.free.fr/index_anglais.htm" target="_blank">http://f6cte.free.fr/index_anglais.htm</a><br />Moderated by Andy K3UK and Gary K7EK
-=-=-
Group Owner: multipsk+owner@groups.io
Unsubscribe: https://groups.io/g/multipsk/leave/6588021/1186076673/xyzzy  [jnovello@...]
-=-=-=-=-=-=-=-=-=-=-=-

Re: "server address is incorrect" in Traffic panel

Patrick Lindecker
 

Ralf,  the packet of 60 files of the Multipsk server has been sent to your personal address.

Jay, the Free server has been fixed (I just checked it).

 

73

Patrick

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Ralf Bender
Envoyé : dimanche 1 décembre 2019 13:29
À : multipsk@groups.io
Objet : Re: [multipsk] "server address is incorrect" in Traffic panel

 

Hi Patrick,

may I have the server files for all modes. 
Just want take a look and maybe give it a try.

Regards 
Ralf

Re: "server address is incorrect" in Traffic panel

Patrick Lindecker
 

Hello Ralf,

 

I will send you the packet of files on your personal address.

 

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Ralf Bender
Envoyé : dimanche 1 décembre 2019 13:29
À : multipsk@groups.io
Objet : Re: [multipsk] "server address is incorrect" in Traffic panel

 

Hi Patrick,

may I have the server files for all modes. 
Just want take a look and maybe give it a try.

Regards 
Ralf

Re: "server address is incorrect" in Traffic panel

Jay Novello
 

OK Patrick - thank you for the information.

On Dec 1, 2019, at 4:13 AM, Patrick Lindecker <f6cte@...> wrote:

Hello Jay,
 
Thanks for the information. I warned my provider Free that their server has a problem but it can be very long to fix...
 
>The address that's in the field next to the "Modification" button has not changed:  http://rg16.free.fr .  So if that one is not working - what should >the new server address be?
There is none. 
 
Note : I can send all my server files (PHP…) (for one mode or all modes) for the ones wishing to use them in a local or public server (in replacement of http://rg16.free.fr). However, I‘m not at all a specialist of PHP…

73
Patrick
 
De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Jay Novello
Envoyé : samedi 30 novembre 2019 22:28
À : mult
ipsk@groups.io
Objet : [multipsk] "server address is incorrect" in Traffic panel
 
Hello -

I've been sending my GMDSS loggings via the "Traffic" facility on the main MultiPSK interface.  Normally when I click that button, I get a display of the last messages received at the server (those of others, plus my own).

But within the last day, I've been getting a warning text in that display, in blue, reading "Attention the server address is incorrect.  Let modify it ("Modification" button)".  And I get a "Script Error" requestor that advises me of an error at a googletagservices.com, and asking if I want to continue running scripts on that page.

The address that's in the field next to the "Modification" button has not changed:  http://rg16.free.fr .  So if that one is not working - what should the new server address be?

Thanks in advance

Jay Novello
Wake Forest, North Carolina USA 
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2707): https://groups.io/g/multipsk/message/2707
Mute This Topic: https://groups.io/mt/64413910/389386
-=-=-
The Multi Mode Digital Software for Amateur Radio, SWL, Utility DXing, Aircraft and ship monitoring and more!   <br /><a href="http://f6cte.free.fr/index_anglais.htm" target="_blank">http://f6cte.free.fr/index_anglais.htm</a><br />Moderated by Andy K3UK and Gary K7EK
-=-=-
Group Owner: multipsk+owner@groups.io
Unsubscribe: https://groups.io/g/multipsk/leave/6588021/1186076673/xyzzy  [jnovello@...]
-=-=-=-=-=-=-=-=-=-=-=-

Re: "server address is incorrect" in Traffic panel

Ralf Bender
 

Hi Patrick,

may I have the server files for all modes. 
Just want take a look and maybe give it a try.

Regards 
Ralf

Re: "server address is incorrect" in Traffic panel

Patrick Lindecker
 

Hello Jay,

 

Thanks for the information. I warned my provider Free that their server has a problem but it can be very long to fix...

 

>The address that's in the field next to the "Modification" button has not changed:  http://rg16.free.fr .  So if that one is not working - what should >the new server address be?

There is none.

 

Note : I can send all my server files (PHP…) (for one mode or all modes) for the ones wishing to use them in a local or public server (in replacement of http://rg16.free.fr). However, I‘m not at all a specialist of PHP…

73

Patrick

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Jay Novello
Envoyé : samedi 30 novembre 2019 22:28
À : mult
ipsk@groups.io
Objet : [multipsk] "server address is incorrect" in Traffic panel

 

Hello -

I've been sending my GMDSS loggings via the "Traffic" facility on the main MultiPSK interface.  Normally when I click that button, I get a display of the last messages received at the server (those of others, plus my own).

But within the last day, I've been getting a warning text in that display, in blue, reading "Attention the server address is incorrect.  Let modify it ("Modification" button)".  And I get a "Script Error" requestor that advises me of an error at a googletagservices.com, and asking if I want to continue running scripts on that page.

The address that's in the field next to the "Modification" button has not changed:  http://rg16.free.fr .  So if that one is not working - what should the new server address be?

Thanks in advance

Jay Novello
Wake Forest, North Carolina USA

"server address is incorrect" in Traffic panel

Jay Novello
 

Hello -

I've been sending my GMDSS loggings via the "Traffic" facility on the main MultiPSK interface.  Normally when I click that button, I get a display of the last messages received at the server (those of others, plus my own).

But within the last day, I've been getting a warning text in that display, in blue, reading "Attention the server address is incorrect.  Let modify it ("Modification" button)".  And I get a "Script Error" requestor that advises me of an error at a googletagservices.com, and asking if I want to continue running scripts on that page.

The address that's in the field next to the "Modification" button has not changed:  http://rg16.free.fr .  So if that one is not working - what should the new server address be?

Thanks in advance

Jay Novello
Wake Forest, North Carolina USA

Re: Hoka decoder suite

IZ2EAT Adriano
 

Dear Arthur,

as a former Hoka user, I can guarantee that the price of their decoder plus the optional plug-ins, are worth every single penny you pay for. Coupled to a top class sdr receiver it redefines the term "communication intelligence".

With that said, however, I agree that its price for an amateur-level application is, to say the least, on the very high end and likely unjustified. 

Hoka delivers professional grade solutions, an order of magnitude that needs to be considered in advance.

To conclude, Patrick's Multipsk is by far one of the best decoding client, de facto free, and in continuous improvement. Maintained and evolving. 

Patrick's customer care remains unsurpassed!

Respectfully yours,

Adriano Basile, CEO
FlexRadio Italia 




Inviato da smartphone Samsung Galaxy.

-------- Messaggio originale --------
Da: Àrthur Thynne <thynne673@...>
Data: 20/11/19 15:51 (GMT+01:00)
A: multipsk@groups.io
Oggetto: [multipsk] Hoka decoder suite

Really. Who in their right mind would willingly part with 4500 euro for a decoder suite. Would nicely cover the cost of a good transceiver. Even that would be over the top in my opinion. 

Re: Hoka decoder suite

Paul Carter
 

Its a commercial package used by governments and private organisations.

In a former life, I used it and it was really excellent. Stable and quite easy to operate with relatively little training. 

All that said, I would not buy it out of my own pocket.

Paul 

On Wed, 20 Nov 2019 at 14:51, Àrthur Thynne <thynne673@...> wrote:
Really. Who in their right mind would willingly part with 4500 euro for a decoder suite. Would nicely cover the cost of a good transceiver. Even that would be over the top in my opinion. 
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2702): https://groups.io/g/multipsk/message/2702
Mute This Topic: https://groups.io/mt/60903526/1909918
-=-=-
The Multi Mode Digital Software for Amateur Radio, SWL, Utility DXing, Aircraft and ship monitoring and more!   <br /><a href="http://f6cte.free.fr/index_anglais.htm" target="_blank">http://f6cte.free.fr/index_anglais.htm</a><br />Moderated by Andy K3UK and Gary K7EK
-=-=-
Group Owner: multipsk+owner@groups.io
Unsubscribe: https://groups.io/g/multipsk/leave/4110768/1758680317/xyzzy  [paulcartermanc@...]
-=-=-=-=-=-=-=-=-=-=-=-

Hoka decoder suite

Àrthur Thynne
 

Really. Who in their right mind would willingly part with 4500 euro for a decoder suite. Would nicely cover the cost of a good transceiver. Even that would be over the top in my opinion.