Re: Repeat


Patrick Lindecker
 

Hello Rien,

 

>How can i repeat the CQ message F2 on PSK31 Mode  ??
You can repeat simply like this:

<TX>CQ CQ CQ CQ CQ DE <MY CALL> <MY CALL> <MY CALL>   CQ CQ CQ CQ CQ DE <MY CALL> <MY CALL> <MY CALL> pse K<RX>

 

You can also click on the “Repeat” button.

 

Note that when you open a “sequence” (F1, F2, F3…), you have several options available.

 

Here are several general hints:

1. About how modes look like


http://f1ult.free.fr/DIGIMODES/MULTIPSK/digimodesF6CTE_en.htm
Look at this address. You have the sound and visual identification of many
modes.

Note: the RS ID permits to identify a mode and the transmission central frequency (see the paper above).
Click on “ID” for RS ID configuration and “RX ID” to set in ON.



2) Calibration of the sound card

It is strongly recommended to calibrate the sound-card: click on the
"Adjustments" menu button, then select the "Determination of the RX/TX
sound-card sampling frequencies
" option and push on the "Determination of
the 48 KHz RX sampling frequency (test on 3 minutes)
" button. At the end of
the test, click on "Return",

3) Sound level

About the sound level ("Level" indication in % at the top of the
screen): an AF level superior or equal to 10 % is OK. About 50 % is ideal
(but not critical). In case of very low AF level, select "16 bits" in the
"Determination of the RX/TX sound-card sampling frequencies" option
("Adjustments" menu button).

4) About the help in Multipsk:

- To bring up the text manual (contextual sensitive one), click on the right
button of the mouse, with the cursor over the mode button "BPSK31", for
example, or any other button. In the example, only the BPSK31 help will be displayed.


- Also use the button hints (wait a fraction of second over a button).

 

5) About frequencies:

Click on the button "QRG" to get all the more or less HF used frequencies.

Click also on “Mode” and “Frequencies used” (for more information about frequencies).

 

6) For about CW, RTTY configuration:

Click on “Mode” for the different options (bandwidth, speed…).

 

73
Patrick

 

 

 

De : multipsk@groups.io [mailto:multipsk@groups.io] De la part de Rien Aarden
Envoyé : vendredi 6 juillet 2018 18:22
À : multipsk@groups.io
Objet : [multipsk] Repeat

 

Hello I,m New with MultiPSK 
How can i repeat the CQ message F2 on PSK31 Mode  ??
Tnx 
Rien




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com


Join multipsk@groups.io to automatically receive all group messages.