I built my Morserino yesterday. Thank you Willi! I'm hooked and tried several of the modes. So much fun. I'm going to show off the unit at the next San Diego DX Club meeting. It was worth waiting for

Hi all, I load my morserino via an external charger (900mA loading current) and tried also the USB choice (120 mA). When waking up the morserino (red button), I never got a battery status better than

Howard, Thanks for your comments. The tape on the paddle connectors has to be removed - its purpose is to serve as a holding point for automatic placement on the PCB by the pick & place robot.

Hi, I have the problem, that m32 seems to have an internal dit-memory. So if I release the paddle, the keyer produces just another dit. This issue exists both in Curtis A and B mode. At speeds around

got the same problem; also by using an external paddle. As a beginner it makes me little crazy... ;-) 73 de Tommes DD1TOM

Hi all, The is no „memory“, but the paddle press is checked as soon as the „dit“ (or „dah“ for that matter) is over. This means, you have to release the paddle completely while the dit is

ich wollte mich erst einmal für diesen tollen Bausatz bedanken. Idee und Umsetzung -> genial. Meine 12 jährige Tochter hat ihn soben mit mir zusammengebaut. Sie hat gelötet (nicht zum ersten

Hello Willi, I like you approach of "not checking" the paddle for a certain time after the dit. For my understanding, the pause after the dit IS PART OF THE DIT and therefore one could really decide

Hello Willi Thank you so much for this kit. I love it. The board is beautifully designed and the finished product is easy to use. The Detailed Assembly Instructions are excellent and I put it together

Willi Great job with the kit, it was easy to put together and worked immediately. However I am having a problem with the battery charging. I am using a 1000mAh 3.7V battery which appears to register

Thanks, Jamie, for the suggestions. I couldn’t find the remark about black solder mask on the eevblog - what is wrong with it? Sorry for the other inconveniences with the PCB - this was pretty

Willi Update: I left the unit on to discharge the battery and at about 3.1V the microprocessor gives up. . I plugged in the adapter and it started charging (orange light was on). Charging current was

Try to keep it connected to USB for at least 10 hours…. This would be the first time that it cannot charge a battery as far as my experience goes. What kind of LiPo battery are you using? Are you

I have had to charge externally for best results. Wake up screen will then show 50% battery and I get a lot of operating time. Perhaps this is due to the charging protection in the battery? I'm glad

AS DK4RW rightly pointed out to me, there is currently a bug in Version 1.0: no matter how you set the parameter for Echo Tone Shift, the resulting tone is not changed. I have identified the issue and

Willi I am not sure at all if these batteries have an internal charger or not. I will try and get hold of the exact model you have recommended. I can not find it in Ireland unless I buy 6 at the same

Dear Willi, I charged my Morserino via USB over night, in the morning it were 4,09V at 0,01mA loading current. Nevertheless battery is shown as nearly empty :-O 73 Tommes DD1TOM

Very strange behavior. I am not sure what’s going in there, and how (or if) I can do anything via Software to improve the situation. Charging itself cannot be influenced by software, but measuring

Servus, hier SRG, mittlerweile DM4SG. ich hab in letzter Zeit immer wieder an der firmware vom alten Modell mit Arduino weitergeschrieben. Es ist noch nicht so reif, dass man es in die dropbox legen

What battery is everyone using? I'm looking at the Tattu battery posted on the Morserino page and the size of the battery listed is bigger than the max dimensions. Thanks Chris