Date   
Re: [External] [morserino] transport casing fro morserino

Parsons, John
 

That’s a great idea.   For the US Amazon site there are three sizes for this product.  What size is this Amazon Basic case?

 

73

 

John Parsons

KC4KXL

 

From: morserino@groups.io <morserino@groups.io> On Behalf Of Birk [DB3DE] via Groups.Io
Sent: Friday, August 2, 2019 1:38 PM
To: morserino@groups.io
Subject: [External] [morserino] transport casing fro morserino

 

Hi,
what packaging do you use for transporting your morserino?
I'm using the AmazoneBasics GoPro XS pouch and I'm happy with it. just needs a bit of foam cutting...
https://www.amazon.de/gp/product/B01CTHWTQE/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Re: [External] [morserino] transport casing fro morserino

Birk [DB3DE]
 

That's the XS (extra small) case.

Re: Battery

Birk [DB3DE]
 

@Hiroyasu Wakamatsu
Careful! LiFePO4 batteries have different voltages.
https://en.wikipedia.org/wiki/Lithium_iron_phosphate_battery
If you charge them via Morserino which I guess is designed for LiPo / Lithium Ion? Batteries the charging voltage will be too high
LiFePO4 batteries Maximum charge voltage = 3.65 V
LiPo is charged with about 4.2 V.

Re: transport casing fro morserino

Joy Rabins
 

I had a "outdoor.cases B&W International type 1000" that I had purchased for another purpose that I am using. It's a hard, waterproof  Pelican type case that I purchased at Fry's on sale. I think it was around $20. It has the pick and pull squares of foam so it will conform with whatever you put in it. The slit on the side is where I put the antenna.. I just have it at an angle so you can see it, it doesn't travel that way. The case is a little bigger than what is needed but it works great and I don't have to worry when I travel with it. With the extra room I can add ear buds which I use most of the time so I don't disturb anyone. It works for me. 

 

--
Joy
N6GO

Re: transport casing fro morserino

John G0EZI
 

Birk [DB3DE] Nice idea for case. Also noticed battery mod. Would be interested in more info on this. 
Thanks. John. G0EZI

Re: transport casing fro morserino

Craig T. Bailey
 

I’ve charged the crappy $7 lipo battery from amazon once two weeks ago, and been using morserino daily in a 70 minute commute.

That battery he is showing would run it for a year! LOL

Direct Audio into the Mac

Craig T. Bailey
 

Well, I'm pleased to say I've got the Morserino piped into my Mac.

In addition, I built a mixing circuit to blend a wired mic input with the line out audio from the Morserino.

This mixer goes into a USB dongle audio card.

Why? you might ask?

When participating in CW Ops Academy, or any other video conferencing system, where you are working with other Morse trainees, its common place to just let the PC's built in mic pick up the code oscilator's side tone over the air.

I'm finding skype was terrible at clipping the keyer, and Zoom wasn't much better. By having it piped direct, the folks on the other end get clean code. Also, by piping it direct, I'm using my headset plugged into the PC (Mac in this case) as the monitor of the side tone.

I suppose this is also precisely what the Mumble app needs as well.

Just one more reason why Morserino is a GREAT educational tool!

new english_words file

Craig T. Bailey
 

Hi everyone, I have successfully recompiled with the US States. I took the easy way out and added them to Willis "English Words" file. For those of you who are entering the CW Ops Academy... the US states are incredibly useful to that curriculum!

If anyone wants to update their Morserino32 with an updated english_words.h file, that includes the US states, here's the plain text:

///////////////
/// The most common English Words in various lengths for CW Trainer
///////////////////////////////////////////////////////////////////
// modified from the file shipped with version 1.4 of Morserino-32
// by W. Kraml OE1WKL

const int WORDS_NUMBER_OF_ELEMENTS = 255; // how many items all together? Increase this number when adding objects
const int WORDS_MAX_SIZE = 14; // longest item +1
const int WORDS_POINTER[] = {0, 251, 181, 146, 90, 46, 26};// array where items start with length = index
// When adding new objects to this list, the above line must be recalculated, because the index in the list changes with new additional words
// NOTE: All words must be provided in lowercase, because Morserino-32 was taught to send CW by lower case only!!
//
const String words[WORDS_NUMBER_OF_ELEMENTS] = {
{ "international" },
{ "university" },
{ "government" },
{ "including" },
{ "following" },
{ "national" },
{ "american" },
{ "released" },
{ "although" },
{ "district" },
{ "between" }, /// l = 7, pos = 10
{ "however" },
{ "through" },
{ "several" },
{ "history" },
{ "against" },
{ "because" },
{ "located" },
{ "company" },
{ "general" },
{ "another" },
{ "century" },
{ "station" },
{ "british" },
{ "college" },
{ "members" },
{ "during" }, /// l = 6, pos = 26
{ "school" },
{ "united" },
{ "states" },
{ "became" },
{ "before" },
{ "people" },
{ "second" },
{ "called" },
{ "series" },
{ "number" },
{ "family" },
{ "county" },
{ "system" },
{ "season" },
{ "played" },
{ "around" },
{ "public" },
{ "former" },
{ "career" },
{ "which" }, /// l = 5, pos = 46
{ "first" },
{ "their" },
{ "after" },
{ "other" },
{ "there" },
{ "years" },
{ "would" },
{ "where" },
{ "later" },
{ "these" },
{ "about" },
{ "under" },
{ "world" },
{ "known" },
{ "while" },
{ "state" },
{ "three" },
{ "being" },
{ "early" },
{ "since" },
{ "until" },
{ "south" },
{ "north" },
{ "music" },
{ "album" },
{ "group" },
{ "often" },
{ "those" },
{ "house" },
{ "began" },
{ "could" },
{ "found" },
{ "major" },
{ "river" },
{ "named" },
{ "still" },
{ "place" },
{ "local" },
{ "party" },
{ "large" },
{ "small" },
{ "along" },
{ "based" },
{ "with" }, /// l = 4, pos = 90
{ "that" },
{ "from" },
{ "were" },
{ "this" },
{ "also" },
{ "have" },
{ "they" },
{ "been" },
{ "when" },
{ "into" },
{ "more" },
{ "time" },
{ "most" },
{ "some" },
{ "only" },
{ "over" },
{ "many" },
{ "such" },
{ "used" },
{ "city" },
{ "then" },
{ "than" },
{ "made" },
{ "part" },
{ "year" },
{ "both" },
{ "them" },
{ "name" },
{ "area" },
{ "well" },
{ "will" },
{ "high" },
{ "born" },
{ "work" },
{ "town" },
{ "film" },
{ "team" },
{ "each" },
{ "life" },
{ "same" },
{ "game" },
{ "four" },
{ "west" },
{ "line" },
{ "like" },
{ "very" },
{ "john" },
{ "home" },
{ "back" },
{ "band" },
{ "show" },
{ "york" },
{ "even" },
{ "much" },
{ "east" },
{ "the" }, /// l = 3, pos = 146
{ "and" },
{ "was" },
{ "for" },
{ "his" },
{ "are" },
{ "has" },
{ "had" },
{ "one" },
{ "not" },
{ "but" },
{ "its" },
{ "new" },
{ "who" },
{ "her" },
{ "two" },
{ "she" },
{ "all" },
{ "can" },
{ "may" },
{ "out" },
{ "him" },
{ "war" },
{ "age" },
{ "now" },
{ "use" },
{ "any" },
{ "end" },
{ "day" },
{ "did" },
{ "own" },
{ "due" },
{ "won" },
{ "sum" },
{ "usa" },
{ "of" }, /// l = 2, pos = 181
{ "km" },
{ "mr" },
{ "us" },
{ "in" },
{ "to" },
{ "is" },
{ "as" },
{ "on" },
{ "by" },
{ "he" },
{ "at" },
{ "it" },
{ "an" },
{ "or" },
{ "be" },
{ "up" },
{ "no" },
{ "so" },
{ "if" },
{ "wy" }, // N1SFT added 50 states
{ "il" },
{ "in" },
{ "ak" },
{ "ar" },
{ "nv" },
{ "or" },
{ "ny" },
{ "hi" },
{ "ct" },
{ "md" },
{ "tn" },
{ "de" },
{ "wa" },
{ "mo" },
{ "tx" },
{ "nc" },
{ "sc" },
{ "me" },
{ "sd" },
{ "ia" },
{ "oh" },
{ "fl" },
{ "wv" },
{ "ok" },
{ "co" },
{ "ms" },
{ "nh" },
{ "va" },
{ "la" },
{ "mn" },
{ "az" },
{ "ca" },
{ "dc" },
{ "mi" },
{ "mt" },
{ "al" },
{ "ks" },
{ "nd" },
{ "pa" },
{ "ut" },
{ "vt" },
{ "nj" },
{ "wi" },
{ "nm" },
{ "id" },
{ "ky" },
{ "ne" },
{ "ma" },
{ "ga" },
{ "ri" }, // End add 50 states
{ "a" },
{ "i" },
{ "m" }
};

Re: transport casing fro morserino

Birk [DB3DE]
 

Hi - regarding the battery I posted here: https://groups.io/g/morserino/message/406
73, Birk [DB3DE]

Re: transport casing fro morserino

Birk [DB3DE]
 

Might be true ... still discharging ;-)
I got a "broken" E-bike battery pack from a colleague for free and took it apart. Turned out that 45 of the 50 cells are still in great shape .... need to use them for something
(for example running a morserino for the next 100 years ;-) )

Cheers & 73 Birk [DB3DE]

Re: transport casing fro morserino

John G0EZI
 

Thanks for reply

Re: Direct Audio into the Mac

Chuck Broadwell, W5UXH
 

On Sun, Aug 4, 2019 at 12:15 PM, Craig T. Bailey wrote:
I suppose this is also precisely what the Mumble app needs as well.
Correct.  Mumble is full duplex so many newcomers to it have problems with the open mic and a speaker.  Turning off the speaker and using headphones makes it usable, but it is far nicer to have a sound card input.  I do not participate in CW training sessions, but still occasionally need to use a mic with newcomers.  On the Mac, a very nice tool is available (unfortunately it costs the same as the M32).  It is LOOPBACK2 from Rogue Amoeba.  It allows you to create virtual audio devices for mixing and pipelining audio between various apps.  I have one virtual device that combines my external sidetone input with the webcam mic when I need to add "voice".  It is also very handy for playing recordings back to someone over Mumble.  I just select the my virtual device that mixes the Audacity output with my input sidetone to select as the input device to Mumble.

Re: [External] Re: [morserino] Battery

MICHAEL YOUNG
 

Dear Group:

I would like to get a Morserino ready made. I’m not good at building gadgets. Arthritis, poor soldering skills, eyesight issues, old. Whine whine whine. I would rather spend the time studying Morse code. If anyone has a working model they would like to sell, I would be interested. 

Thank you,
Mike KN6CVO


On Aug 2, 2019, at 10:29 AM, Parsons, John <john.parsons@...> wrote:

Looks good.

 

73

 

John Parsons

KC4KXL

 

From: morserino@groups.io <morserino@groups.io> On Behalf Of Birk [DB3DE] via Groups.Io
Sent: Friday, August 2, 2019 1:27 PM
To: morserino@groups.io
Subject: [External] Re: [morserino] Battery

 

Hi all,
I created a 18650 cell holder. For those of you, who have access to an 3D printer this might be a solution.
The design can be found here: https://www.thingiverse.com/thing:3782717

<image001.jpg>

Re: [External] Re: [morserino] Battery

Vince A
 

@Micheal Young
Email me at vince@.... RE: Building your Morserino kit
---
-During World War 2, Hams could not do what in the USA?
- In the movie Contact, what was Ellie's callsign?
- "Bandwidth" A Ham's waist size!
73-Vince: ":>) KD7TWW Formerly KJ7EUG
Thank you for your reply...


On Mon, Aug 5, 2019 at 6:55 PM MICHAEL YOUNG via Groups.Io <mikejazz=me.com@groups.io> wrote:
Dear Group:

I would like to get a Morserino ready made. I’m not good at building gadgets. Arthritis, poor soldering skills, eyesight issues, old. Whine whine whine. I would rather spend the time studying Morse code. If anyone has a working model they would like to sell, I would be interested. 

Thank you,
Mike KN6CVO


On Aug 2, 2019, at 10:29 AM, Parsons, John <john.parsons@...> wrote:

Looks good.

 

73

 

John Parsons

KC4KXL

 

From: morserino@groups.io <morserino@groups.io> On Behalf Of Birk [DB3DE] via Groups.Io
Sent: Friday, August 2, 2019 1:27 PM
To: morserino@groups.io
Subject: [External] Re: [morserino] Battery

 

Hi all,
I created a 18650 cell holder. For those of you, who have access to an 3D printer this might be a solution.
The design can be found here: https://www.thingiverse.com/thing:3782717

<image001.jpg>

Re: ESP32 Board Definitions?

Mark KG5SPO
 

Sorry, beyond GitHub and Heltec sites I am no help.  Were you able to compile the source code and upload it to the Morserino-32 via the USB?

Thanks.

Re: [External] Re: [morserino] Battery

David Wilcox
 

Mike,

If you have a handy kid (grand kid, niece, nephew) they can solder this kit for you.  The only soldering is putting the connectors, speaker, on the board and adding the battery wires. All the surface mount parts are installed already.  It really isn’t a “kit” but just assembling a few parts.  My 11 year old grand son could have built this one. 

David J. Wilcox K8WPE’s iPad

On Aug 5, 2019, at 8:55 PM, MICHAEL YOUNG via Groups.Io <mikejazz@...> wrote:

Dear Group:

I would like to get a Morserino ready made. I’m not good at building gadgets. Arthritis, poor soldering skills, eyesight issues, old. Whine whine whine. I would rather spend the time studying Morse code. If anyone has a working model they would like to sell, I would be interested. 

Thank you,
Mike KN6CVO


On Aug 2, 2019, at 10:29 AM, Parsons, John <john.parsons@...> wrote:

Looks good.

 

73

 

John Parsons

KC4KXL

 

From: morserino@groups.io <morserino@groups.io> On Behalf Of Birk [DB3DE] via Groups.Io
Sent: Friday, August 2, 2019 1:27 PM
To: morserino@groups.io
Subject: [External] Re: [morserino] Battery

 

Hi all,
I created a 18650 cell holder. For those of you, who have access to an 3D printer this might be a solution.
The design can be found here: https://www.thingiverse.com/thing:3782717

<image001.jpg>

Re: [External] Re: [morserino] Battery

abeckett@...
 

KN6CVO Complete and operational Morserino-32 available. Contact KL1HC

Problems with Morserino.

Steve
 

I eventually got around to building my kit. Everything seemed to go well on the build and the device boots up. I select CW keyer, the get “start CW keyer” then just get a constant stream of A but can’t do anything but press the black button to stop it. 

If I select CW generator, random (or any other sub menu) I get start/stop paddle black then the top bar just shows (14) 15 wpm and then nothing else? The device has to be reset to get of this. This is also the same with echo trainer, Koch trainer etc. The paddles don’t seem to work and have tried external key, having changed the settings but still nothing

Any help much appreciated but I’ve run out of ideas. I saw Willi’s post about the paddles by touching pins 2 and 12 but even that doesn’t work!

regards

steve


Re: Problems with Morserino.

Willi, OE1WKL
 

Steve,
I am assuming you are running version 1.4?

In this version the external paddles and the touch paddles are running in parallel; your symptoms show that both paddles seem to be permanently engaged - this could also be a short to ground on pin 32 and 33, or at the jack for the external paddles.
Measure the resistance between32 and ground, and pin33 and ground (if you look at the schematics on GitHub, you can identify those pins - in the schematic the Heltec module is shown from above, with the USB port at the top), to see if there is a short somewhere. 

73

Willi
OE1WKL




Am 11.08.2019 um 15:52 schrieb Steve <steveb2541@...>:

I eventually got around to building my kit. Everything seemed to go well on the build and the device boots up. I select CW keyer, the get “start CW keyer” then just get a constant stream of A but can’t do anything but press the black button to stop it. 

If I select CW generator, random (or any other sub menu) I get start/stop paddle black then the top bar just shows (14) 15 wpm and then nothing else? The device has to be reset to get of this. This is also the same with echo trainer, Koch trainer etc. The paddles don’t seem to work and have tried external key, having changed the settings but still nothing

Any help much appreciated but I’ve run out of ideas. I saw Willi’s post about the paddles by touching pins 2 and 12 but even that doesn’t work!

regards

steve



Re: Problems with Morserino.

Steve
 

Willi, thanks for the reply.
yes it is version 1.4, and I have checked the two pins to ground as you suggested and there are no shorts. I also checked the pins on the external paddle connector. If I’m correct the screen pin goes to ground ( the one nearest the board edge) but the other 4 are all open to ground.

73s

steve G7JHU