Is there an update to the Description of Changes for the DSP2 in the works? The latest document at https://malahiteam.com/en/documentation/ is a few versions out of date and has not caught up with the

https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjOkL3Z_-P-AhXD9VEKHYaMCI0YABAPGgJ3cw&ohost=www.google.com&cid=CAESZ-D2OW7ymGBgiqifG6RJDRgZ5k2hdOT39F7701cOBupl0N4G5YGXuTfuXtlgwMxlFnE3AYFA04

I have a clone. SW:1.10a Not really interested in upgrading the firmware. Just want sdr software that sees the rig. Windows 11 see the malahit and puts 2 usb comports in device manager. Watching a You

I bought a Jstvro clone knowing it was a clone to play with for a bit. It came with 1.01c rev2 firmware. Ive been afraid to try and do a firmware upgrade. Should I? Any tips if I should try? The selle

I've noticed on AliExpress Chinese Malahit clones actually using the Malahiteam logo:- ￡277.81 14%OFF | Malahiteam DSP2 SDR M2 Registered FW 2.20C 10k-380M 403.3M-2GHz Malachite Receiver Radio Russian

Hello, everyone. I am just curious and if anyone can shed some light about the DSP1 1.10d "User Funct." under HARD menu? Thank you and 73 N7SIX, Sean

I've never actually managed to get this to work at all. I'm on holiday in a really remote part of Scotland at the moment, the noise levels are very low here and I'm on the coast so if I'm going to get

Hello Team, Malahiteam is now changing the production line from DSP2 to DSP3. The DSP2 is no longer in production. Note: The DDC and optional board for it are still being offered. The reason for the D

I have used STM32CubeProgrammer to update the firmware on my DSP2 (official version from China) . First to 2_30 then back to 2_20. Note that the start address I am using in STM32 is 0x08000000. Once t

Hi all I have a cream cased malahit that the red and green light come on and the green goes faint with no boot. I have tried dfu both ways and nothing, I suspected the battery, but it is charged and s

Hi, Is there any way to improve the RDS on the DSP2, I can't see any settings that might improve it directly but just wondered if anyone has any ideas that might help. I find that the RDS doesn't work

A radio club member presented me with a beige metal box and a load of encoder wires hanging off it- this was my first experience of a Chinese clone and the project, interestingly there was a power but

Running on windows I have it working with malahit encoder and sometimes with windows sending serial commands. I have been using kenwood commands and I'm uncertain as to why I have windows waterfall an

I have a Jstvro clone that is not responding after an update attempt. It came with version b and I did update once, but decided to roll back. Then I decided to update again and now I get nothing. I ha

Hi Guys, This may be a stretch, but has anyone tried intercepting the IQ signal to analyze it through Spectrum Lab? Mike C. Sand Mtn GA

Tune to your frequency, go to BAND menu, chose among 50 memory positions (10 shown at a time) and hold a memory button with your finger until beep is heard. Your frequency is saved there. Touch it mom

Hi, I recently acquired a Malahit SDR. How do I determine what firmware is installed? It was purchased second hand at a hamfest. Came with a few accessories, a box but no documentation whatsoever. Tha

I found this Facebook group about Malahit SDR : https://www.facebook.com/qr/528728225258485 I think it would be interesting for some of you. Take care, no Chinese clones talk is admitted on this group

Hello dear All, I recently had a problem with my screen. Do you know where I can buy a replacement? Thanks in advance.

So I received my radio yesterday and I can't tell you how well this radio receives. My question is about charging the radio. It should be a no brainer but I'm must be missing something. So you have th