Loftur E. Jónasson - TF3LJ / VE2LJX Is there any chance of getting a software change or tweak to allow control of BOTH the Radio AND Controller through the Teensy USB Port at the same time? Another wo

I edited the code for the CAT response parser to add some error checking. Why didn't the radio manufacturers ever forsee the wisdom of checksums with something as critical as CAT? Error detection is a

Hi All, I have a magnetic loop with huge cased air variable capacitor which I tune manually, works well, no issues running 100+W into it but of course turning process is not most convenient. I started

Greetings from NZ. I have built a mag loop antenna for 40, 30 and 20mtrs, tuned with a stepper motor and wide spaced capacitor. Tuning method is by using a manual rotary switch, which is a long and te

hi all, a little Story, perhaps useful to know. My rig is a Kenwood TS-570D G and I had issues to get a stable connection between controller and rig while using the simple wiring as sugested in BOM. S

Hi folks, I've attached a modified version of the v410 firmware that supports the Xiegu G90... Note that I've only had Loftur's code modified for the G90 and running for a day... Both the G90 modified

Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Arduino Uno" ML_v410:61:10: fatal error: LiquidCrystalFast.h: No such file or directory #include <LiquidCrystalFast.h> ^~~~~~~~~~~~~~~~~~

Anybody experience this bug. When you tune up or down and the end stop switches turn off motor you power off the unit. When you turn the power back on the motor cannot move up or down. The only way I

Guys The TTL to RS232 doesn’t work for me. Whatever I set the com port parameters to I get garbage displayed on Putty and my own software monitor. Controller should be sending FA; (Yaesu FT450D). I’ve

Hi group, If you need a small Power and SWR meter with a awesome display with a range between 100mW and 2000W then to look at this, Can be powered by a battery and readable in direct sunlight. Best re

Used this coupler kit from Russia. Was cheap and high quality. All I had to do was change the resistors r-15 and 16 to 22k and r-17 and 18 to 47k. SWR power function is 1% accurate to 200 watts. Look

Guys Does anyone know the what the 4 pins are on the PCB R4 2019-05? The web article shows the old board and nothing on the schematic. After my last “senior” moment I’m reluctant to remove the board t

Has anybody tried this firmware with and ICOM 7300 by using pass thru mode? This rig has no serial port so I guess the only way to use it would be to have the controller plugged into the computer as w

Hello, Does anyone know if the Yaesu FT-950 will work with the MLC we have. I know its not in the software to select but i read somewhere in the documentation that it may work. Doug VE3GVW

Anybody have luck getting this working with loop controller? I usually use ICOM 7100 library’s on Hamlib and I can read the VFO and key it in software with them. I tried every option for ICOM with no

I was wondering how involved is it to add another radio to the supported radios. I plan on using the magnetic loop controller with my Yaesu FT-991A. Can I Just add it in on the firmware or do I have t

I am having a problem with the end stop switches. I have them enabled in the firmware but they don’t stop the stepper. Looking at the configuration in the schematic it appears they need a 5 volt pull

Guys Is there a way of changing the controller com port. I have logging software that needs to talk to the rig at the same time as the controller. I can create a shared comp port with HHD Virtual Port

At first i like to thank Loftur for his great work. I have thought about something like this quite a long time and this projekt is realy what i dreamed about. But there is one point i don't realy like

Hello, a few months ago I bought a Sun SDR2 Pro. I'm very pleased with it. Unbelievably good transceiver. Now I'm building the Loftur loopcontroller and for it to work I have to connect the loopcontro