Re: Coupling Shaft.


Robbert J. van Herksen
 

Oops, silly me.

I forget the link:


Sorry guys! 

73 de Robbert / PA3BKL

 XS Max (512Gb)

On 10 Sep 2022, at 18:34, Robbert J. van Herksen via groups.io <rescueteam@...> wrote:

Here is a interesting video from Jerri Elsworth / AI6TK
Where she is visualising high voltage-distribution on magloops using neon tubes.

IMHO a great way to see where the voltages are where we don’t want them.

73 de Robbert TA2/PA3BKL
The dutch guy living (it up) in Istanbul


 XS Max (512Gb)

On 10 Sep 2022, at 10:21, Immo, DL5KB <dl5kb@...> wrote:

hi Ed,

thanks for sharing your experience, and, fine that you were able to solve the issue. 

Perhaps another thought about possible issues touching butterfly-C. Therein are found the differences between theory and practice :-)
Some (more) voltage at the driving shaft (middle of the C) may occur, if
- the loop is grounded, but not right to the electrical middle of the loop...
   (The parts of bonding the cap to the loop prolongs the loop physically. If these connections are of different length at both sides,
    this will shift the electrical ground-(neutral)point of the loop respective. Think about: Grounding ever happens if using a gamma match to drive the loop!)
- the two halves of the butterfly are not of equal capitance.
  (If plates are of different aligned distances at both sides or plates are not of equal size. Just if homebrew, this may occur often.)

73, Immo

--
73 de Robbert / TA2IX (aka PA3BKL)
The dutch guy living in Istanbul

--
73 de Robbert / TA2IX (aka PA3BKL)
The dutch guy living in Istanbul

Join loopController@groups.io to automatically receive all group messages.