|
Fldigi, No decode text appears in the receive window 6 messages
#fldigi
Hello, I'm a beginner for fldigi, has just installed. I could find CW decode text stream in the Signal Browser box, however those decoded text didn't appear on the Receive window at all even I clicked
Hello, I'm a beginner for fldigi, has just installed. I could find CW decode text stream in the Signal Browser box, however those decoded text didn't appear on the Receive window at all even I clicked
|
By
Terry TAKIZAWA, JG1NAF
·
|
|
Linux USB and IC-705 weirdness 5 messages
At Dave W1HKJ's suggestion, I configured my IC-705 to use DTR/RTS CW keying. I set the USB SEND menu on the IC-705 to off, USB Keying (CW) to USB(A) DTR, and configured Flrig and Fldigi for DTR keying
At Dave W1HKJ's suggestion, I configured my IC-705 to use DTR/RTS CW keying. I set the USB SEND menu on the IC-705 to off, USB Keying (CW) to USB(A) DTR, and configured Flrig and Fldigi for DTR keying
|
By
Harry Bloomberg, W3YJ
·
|
|
Building Fldigi 4.x.x WITHOUT Portaudio. 17 messages
Hi. A long post this, please read it all before replying, not jumping to conclusions. If it's too much to read, never mind... Mint 19.3 Cinnamon, 64 bit. (All up to date, and still receiving security
Hi. A long post this, please read it all before replying, not jumping to conclusions. If it's too much to read, never mind... Mint 19.3 Cinnamon, 64 bit. (All up to date, and still receiving security
|
By
Dave, GØWBX
·
|
|
fldigi 4.1.23 posted 6 messages
at http://www.w1hkj.com/files/fldigi/ fldigi-4.1.23.tar.gz 2022-06-23 09:52 4.7M fldigi-4.1.23_BS.dmg 2022-06-23 09:52 14M fldigi-4.1.23_HS.dmg 2022-06-23 09:52 7.9M fldigi-4.1.23_LI.dmg 2022-06-23 09
at http://www.w1hkj.com/files/fldigi/ fldigi-4.1.23.tar.gz 2022-06-23 09:52 4.7M fldigi-4.1.23_BS.dmg 2022-06-23 09:52 14M fldigi-4.1.23_HS.dmg 2022-06-23 09:52 7.9M fldigi-4.1.23_LI.dmg 2022-06-23 09
|
By
Dave, W1HKJ
·
|
|
Flrig and MacLoggerDX
Is it possible to have Flrig own the CAT control, and MLDX to at least follow the radio frequency and mode (even if it cant directly control it)? It would be nice to have these two applications work t
Is it possible to have Flrig own the CAT control, and MLDX to at least follow the radio frequency and mode (even if it cant directly control it)? It would be nice to have these two applications work t
|
By
Lonney, K1LH
·
|
|
Building fldigi cross compiled with MXE With Ubuntu running under Windows WSL2
#fldigi
#flrig
After following most of the instructions on the wiki at https://sourceforge.net/p/fldigi/wiki/Compile%20Windows%20binary%20using%20Windows%20Subsystem%20for%20Linux%20%28WSL%29/ Before bootstrapping t
After following most of the instructions on the wiki at https://sourceforge.net/p/fldigi/wiki/Compile%20Windows%20binary%20using%20Windows%20Subsystem%20for%20Linux%20%28WSL%29/ Before bootstrapping t
|
By
ve3nvk
·
|
|
FLDIGi Configure 5 messages
I have been using Fldigi for years. Now all of a sudden the Config screen has changed. It goes to Operator and is stuck there and none of the other choices can be selected. I watched an old Youtube on
I have been using Fldigi for years. Now all of a sudden the Config screen has changed. It goes to Operator and is stuck there and none of the other choices can be selected. I watched an old Youtube on
|
By
Dave Melton, W4WNG
·
|
|
macOS - Build From Source 22 messages
#macos
#build
After asking my Xcode version question yesterday, I realized I could not run the latest version of SmartSDR for Mac unless I had macOS 11 or greater. Semi-reluctantly, I upgraded my 2015 MacBook Air t
After asking my Xcode version question yesterday, I realized I could not run the latest version of SmartSDR for Mac unless I had macOS 11 or greater. Semi-reluctantly, I upgraded my 2015 MacBook Air t
|
By
W4JBB
·
|
|
fldigi 4.1.22.08 alpha posted at 36 messages
http://www.w1hkj.com/alpha/fldigi/ 5cwsigs.wav 2022-05-31 11:19 1.7M CW_Transmit.html 2022-05-24 07:47 892K FSK_Transmit.html 2022-05-24 07:47 704K fldigi-4.1.22.08.HIGH_SIERRA.dmg 2022-06-21 08:46 7.
http://www.w1hkj.com/alpha/fldigi/ 5cwsigs.wav 2022-05-31 11:19 1.7M CW_Transmit.html 2022-05-24 07:47 892K FSK_Transmit.html 2022-05-24 07:47 704K fldigi-4.1.22.08.HIGH_SIERRA.dmg 2022-06-21 08:46 7.
|
By
Dave, W1HKJ
·
|
|
flmsg-4.0.20 posted
at http://www.w1hkj.com/files/flmsg/ flmsg-4.0.20.tar.gz 2022-06-23 10:29 864K flmsg-4.0.20_BS.dmg 2022-06-23 10:29 2.9M flmsg-4.0.20_HS.dmg 2022-06-23 10:29 1.7M flmsg-4.0.20_LI.dmg 2022-06-23 10:29
at http://www.w1hkj.com/files/flmsg/ flmsg-4.0.20.tar.gz 2022-06-23 10:29 864K flmsg-4.0.20_BS.dmg 2022-06-23 10:29 2.9M flmsg-4.0.20_HS.dmg 2022-06-23 10:29 1.7M flmsg-4.0.20_LI.dmg 2022-06-23 10:29
|
By
Dave, W1HKJ
·
|
|
moderated
Decoding Olivia across the full spectrum 6 messages
#fldigi
PSK31 is decoded simultaneously across the full 3khz spectrum in fldigi but Olivia only once, where I locate the bounding lines in the waterfall. I'd like to do full spectrum decoded for an Olivia mod
PSK31 is decoded simultaneously across the full 3khz spectrum in fldigi but Olivia only once, where I locate the bounding lines in the waterfall. I'd like to do full spectrum decoded for an Olivia mod
|
By
Kevin, KJ7UCF
·
|
|
moderated
Fldigi xml-rpc encoding 7 messages
I am using the xml-rpc to control fldigi from my sdr. I have a few queries on the programming side. 1. When I call rx.get_data, I get base64 encoded UTF-8 string. The unknown characters show up as a d
I am using the xml-rpc to control fldigi from my sdr. I have a few queries on the programming side. 1. When I call rx.get_data, I get base64 encoded UTF-8 string. The unknown characters show up as a d
|
By
Ashhar Farhan, VU2ESE
·
|
|
CTY-3224 Country Files - 21 June 2022
The Country (CTY) Files were updated on 21 June 2022: https://www.country-files.com/cty-3224-21-june-2022/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over
The Country (CTY) Files were updated on 21 June 2022: https://www.country-files.com/cty-3224-21-june-2022/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over
|
By
Jim Reisert AD1C
·
|
|
moderated
Flrig 9 messages
Hi Gene, Thanks for getting back to us. I'll look into why that version is giving that error message for you. In the mean time please try these versions: http://www.w1hkj.com/files/archives/OS-X/flrig
Hi Gene, Thanks for getting back to us. I'll look into why that version is giving that error message for you. In the mean time please try these versions: http://www.w1hkj.com/files/archives/OS-X/flrig
|
By
Cliff, AE5ZA
·
|
|
moderated
Flrig 1.4.5 on arm64 - vfoA goes wild on transmit 11 messages
Hey there, After a series of application issues with an earlier version, including the Tune button not working for my Xiegu G90, I now find that Flrig 1.4.5 running on my Raspberry Pi 400 (arm64) is a
Hey there, After a series of application issues with an earlier version, including the Tune button not working for my Xiegu G90, I now find that Flrig 1.4.5 running on my Raspberry Pi 400 (arm64) is a
|
By
Dave M7TLB
·
|
|
moderated
Dragon OS Focal Laptop 3 messages
I would like to setup a laptop with Dragon OS Focal as the operating system. I am looking for a good, but not horribly expensive laptop to do this. Are there any recommendations on what I should get?
I would like to setup a laptop with Dragon OS Focal as the operating system. I am looking for a good, but not horribly expensive laptop to do this. Are there any recommendations on what I should get?
|
By
Daniel Fox, KF9ET
·
|
|
moderated
Raspberry Pi Buster ( Pi OS ) No Audio Device Found 12 messages
Hello Bill here N3GTY I have the Legacy version Raspbian 32 and 64bit that works no issues with sound devices. I have tried a fresh install of the new Buster and get the error when attempting to adjus
Hello Bill here N3GTY I have the Legacy version Raspbian 32 and 64bit that works no issues with sound devices. I have tried a fresh install of the new Buster and get the error when attempting to adjus
|
By
William Wagaman, N3GTY
·
|
|
moderated
CTY-3223 Country Files - 14 June 2022
The Country (CTY) Files were updated on 14 June 2022: https://www.country-files.com/cty-3223-14-june-2022/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over
The Country (CTY) Files were updated on 14 June 2022: https://www.country-files.com/cty-3223-14-june-2022/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over
|
By
Jim Reisert AD1C
·
|
|
moderated
$56 Chromebook alternative to Pi computers -now under $55 41 messages
Navigate over the URL provided and you'll find "Refurbished" Click on that...It takes you to $54.95 USD and for me $4.12 tax for a delivered price of $59.09.. I have bought a number of refurbished com
Navigate over the URL provided and you'll find "Refurbished" Click on that...It takes you to $54.95 USD and for me $4.12 tax for a delivered price of $59.09.. I have bought a number of refurbished com
|
By
Larry Macionski, W8LM
·
|
|
moderated
building from source osx 2 messages
I'm following along in the instructions for doing a mac osx build: https://sourceforge.net/p/fldigi/wiki/osx_howto/ The target machine is running 12.3.1. Since I'd rather not download the source code
I'm following along in the instructions for doing a mac osx build: https://sourceforge.net/p/fldigi/wiki/osx_howto/ The target machine is running 12.3.1. Since I'd rather not download the source code
|
By
Chris, KE0KCG
·
|