Your welcome. I'm sure you will get the issue solved. 73, Andy, ka2uqw

#wsjtx #ubuntu

Andy, Thank you for the pointer to the mailing list. I've joined that and a pretty active WSJTX group. B

#wsjtx #ubuntu

Brendan, I thought your issue might be similar to the one I had here. I am not familiar with your rig, the connection is different than the 991a. If you don't get a answer to your question here in thi

#wsjtx #ubuntu

Andy, I have a Sabrent USB sound card connected to the 6-pin DATA port, and a different USB-to-serial adapter connected to the 8-pin ACC port. These are connected to two different USB ports directly o

#wsjtx #ubuntu

N0BML, Hi, What is the hookup from rig to computer? Is it a single usb cable to control all functions? I had a similar issue with a FT991a, using a single cable. But I was running a earlier Kubuntu ve

#wsjtx #ubuntu

Greetings! I've installed WSJTX on my laptop running Ubuntu 20.04. I installed it by downloading the package from the website and running: sudo dpkg -i wsjtx_2.5.4_amd64.deb sudo apt -f install When r

#wsjtx #ubuntu

You probably need to change these configuration items: David

#wsjtx #macos #flrig #ts-590s

David; This has been going on for a while. It is pretty minor but I have been getting NB1 turned on somehow when using Flrig with TS590S, Catalina, Late 2012 Mac Mini I7, 16gig, , and WSJTX V2.2. I ha

#wsjtx #macos #flrig #ts-590s

OK, solution found. For the 30M WSPR-PI TAPR kit, c4 and c7 are 270 pf, and c5 and c6 are 560 pf. The inductors l2 and l4 are 1uf, and inductor l3 is 2.5 uf. I will try to attach a picture of the outp

#raspberrypi #wsjtx

Thanks, that helps, at least a side view of the assembled kit board. But, still no component values for the output filter on the schematic. I'll look at some 30m filter designs and I should be able to

#raspberrypi #wsjtx

I just found this, including the schematic. Was indeed "Very Well hidden"... https://web.tapr.org/pdf/WSPR-WIthout-Tears-30m-and-40m.pdf Should help somewhat perhaps. 73. Dave G0WBX.

#raspberrypi #wsjtx

Yes Robin, I had tried the wayback machine! I also sent an email to TAPR but based upon prior experience, they are a little slow to respond. If I get the instructions, i'l put them in the files sectio

#raspberrypi #wsjtx

Mitch, the Web Archive's wayback machine was no help, the relevant page did not seem ot have been archived! You could try a direct approach to TAPR. Good luck! 73, Stay Safe, Robin, G8DQX

#raspberrypi #wsjtx

Thanks for the response Robin, but the documentation you linked to is for the current offered assembled only unit. The prior product was a kit, and I have the kit, so I need the kit assembly instructi

#raspberrypi #wsjtx

Mitch, you could try https://tapr.org/wspr-on-20-30-and-40-meters/#comment-7849, which offers a document https://web.tapr.org/pdf/WSPR-WIthout-Tears-30m-and-40m.pdf. I suspect that the necessary image

#raspberrypi #wsjtx

I recently acquired the kit version of the TAPR 30M WSPR-PI kit. A card came with the kit to go to the TAPR website for building instructions. Unfortunately, TAPR has retired the kit (new version is n

#raspberrypi #wsjtx

I am trying to get WSJT-X working with an IC-7000, Digi Keyer II, and mhuxd. So far, it looks like rig control is good. WSJT-X reads the frequency display, changes bands, etc. I cannot, however, get a

#wsjtx #ubuntu

Thank you all, I'm up and running with usb sound card and kx2! Harry Bloomberg W3YJ, thank you for the photo and info. I'm new to the Raspberry PI with Amateur radio software so I'm still figuring it

#wsjtx

You might want to consider a Xiegu-5105, much cheaper, and fully supported by flrig. If you were hiking with Gandalf in the Mountains of Moria you probably would want to go as light as possible, a sin

#wsjtx

I use an Icom IC-7200 with on-board sound card. "One cable to rule them all, and on my Raspi bind it." I also have a Yaesu FT-891. No built-in sound card. Lots of cable salad. The IC-7200 is much heav

#wsjtx