Cliff, Please email me at w7zdx.wa@... Got some questions about fldigi. No hurry! Bog W7ZDX

#fldigi

Cliff I have tried and tried to get this to work. I originally started on a Windows 10 machine, then moved to Windows 11. Finally I bought a SignaLink and it worked but for some reason only known to W

#fldigi

Why in the world are you using a Signal Link with a 7300 when there’s what you need by simply connecting the USB port? I’ve never seen an easier radio to interface for data in 60 years.

#fldigi

Look on top half of page 2-4 of your manual ( can be found at Icom USA online for free like I just done =) Just connect USB .... set code in FLdigi / FLrig and go =) Linux will take care of the USB co

#fldigi

Bill Thank you and the rest of the folks here for caring enough to help. Its really appreciated! I am not so sure that the connection from my mic jack to the computer is the problem. My YL, KK7FJZ, ha

#fldigi

Thanks, hard to read the conversation out of order sometimes. Heheh 73 de NE4RD Bill

#fldigi

Read all the messages and you will get a better understanding. It has to do with Windows Updates and no COMPORTS which is why I going to Linux. Bog W7ZDX

#fldigi

Always remember to do "sudo apt remove brltty" as they enable that service by default, or at the least disable that service as it interferes with serial port communications. You can just disable the s

#fldigi

I'm not sure why you would need a Signalink box with an IC-7300, it already provides the audio path through USB itself. You can save that box for an older rig. 73 de NE4RD Bill

#fldigi

After all these years perhaps I am still a rookie. I discovered that my mic cord wasn't plugged into my Linux machine. It was still plugged into the SignaLink USB. The rig didn't smoke but it did free

#fldigi

Bog, Dave was asking if you would allow him to remotely connect to your linux computer to help you. Flrig is always being improved so may be slightly different looking, but the build and install are t

#fldigi

Cliff Thanks for the input. I have already been to that page. FLRIG seems slightly different but fldigi is the same. Bog

#fldigi

Bog, I don’t think you need the SignaLink USB. There is a digital port on the IC7300 that will go straight into your computer, though I use my IC7300 for CW and phone and can’t provide further guidanc

#fldigi

Packages on Debian are usually not current so building yourself will get the latest GA version. Also, be sure to remove any of the flxxx suite that you build before running the freshly application. Se

#fldigi

Bog, Pardon me for butting in here, but follow this to install fldigi etc. and run through the 7300 how to wiki and you should be good to go. https://sourceforge.net/p/fldigi/wiki/debian_howto/ 73, Cl

#fldigi

David, Now I am confused hihi! My thought process is based on Windows OS. As far as I know I am using Linux Mint if that is the distrobution you are referring to? No remote access that I am aware of.

#fldigi

Bog, There are no drivers required for Linux and the Icom 7300. What Linux distribution are you using? Are you open to allowing someone remote access to you system? David

#fldigi

Hello David, I have tried and failed at installing the drivers. During the last few days I have installed a lot of Linux softwre but now I am certainly doing something wrong. After reading through the

#fldigi

Thanks Dave! I plan on doing some more research and I will follow your suggestions. Thanks for a speedy response! 73 Bog W7ZDX

#fldigi

Bog, Make sure you are a member of the the group that serial port access, either modem or dialout, depending on the Linux distribution. $ groups and make sure you read and follow the 7300 setup instru

#fldigi