你好约翰！我最近很忙。我刚看到您的消息，我会尽快为您提供良好的翻译信息。另外，由于某些词汇没有相应的中文，因此需要计算一些专业术语。�

你好约翰。目前，专业术语的翻译可能需要几天的时间。

你好约翰。目前，专业术语的翻译可能需要几天的时间。

On Wed, Nov 18, 2020 at 04:48 PM, Dave, W1HKJ wrote: Patrick, F6CTE, (RsID principal) and I discussed your request.Thank you Dave, I appreciate it. May I add some comments and a proposal? The main use

Andflmsg Chinese translation has been completed, I am worried that the email cannot be sent to Google's mailbox, I will upload it again, please add John to Andflmsg, thank you again.

Never mind! I found a previous topic discussing FLDigi failing to launch on a Raspberry Pi and followed a suggestion to rename the fldigi.prefs and fldigi_def.xml files in the ./.fldigi folder and

Hi everyone, I run the latest version of FLrig almost daily on a Raspberry Pi 4B with 4GB memory without any problems. It's been a month or two since I last used FLdigi. At that time it ran fine

Hi Kevin, That great, no problems. Will wait for your tests results. 73, John (VK2ETA)

Kevin... Re: Your nationwide comms group. It might be useful to know more about each other. Out west we have ORCA DIGITAL NET and Western Digital Net. There may come events where we could assist

OK, solution found. For the 30M WSPR-PI TAPR kit, c4 and c7 are 270 pf, and c5 and c6 are 560 pf. The inductors l2 and l4 are 1uf, and inductor l3 is 2.5 uf. I will try to attach a picture of the

John, Had a chance to try this last night and the Cst 4/250 mode worked flawlessly! Will test further this weekend and report back, Thank You!! 73, K3TL

Big Sur test dmgs are located at http://www.w1hkj.com/bigsur/ David On 11/20/20 6:35 AM, Philip, AC4O wrote:

I have an iMac and recently updated it to Big Sur. I am fairly new to the digital modes, but would be happy to help test if you still need people for that. Thanks, Philip AC4O

Unfortunately I have learned that what I thought was a "clean" Raspberry Pi 3 actually had an older version of tqsl built, so without completely rebuilding a system I cannot come up with a 100%

Here here ... absolutely agree Harry. Part of the problem is also in naming ... tqsl, TrustedQSL are the references in all of the documentation. Nowhere do I read trustedqsl.

Wish ARRL would have put your tips into their build instructions. Thanks! 73, Harry W3YJ

I just went through this re-setting up my Pi 4 for ham use. It runs Raspbian, but since both Raspbian and Mint use APT for package management, this addendum will work just fine (once you

I just installed .5.7 on Mint 20 Cinnamon and it's working fine with CQRLOG. Here's how I install it: 1. Unpack the tarball to a directory in your homedirectory. Remember where! 2. Now find the tqsl

I have some basic installation details for TQSL in the HamPi playbook on GitHub: https://github.com/dslotter/HamPi/blob/master/tasks/install_tqsl.yml -- - Dave W3DJS

Thanks. I did it once and I did take some sketchy notes so it ought to be easier on the "clean" Pi 3. 73, Harary W3YJ