Date   

moderated Re: Anybody else running TQSL?

Harry Bloomberg, W3YJ
 

Thanks.  I did it once and I did take some sketchy notes so it ought to be easier on the "clean" Pi 3.

73,
Harary W3YJ


On Thu, Nov 19, 2020 at 6:22 PM Dave, W1HKJ <w1hkj@...> wrote:
Send me an email if you get stuck.

Dave

On 11/19/20 4:15 PM, Harry Bloomberg, W3YJ wrote:
I have a Raspberry Pi 3 that I have not installed TSQL on yet.  I'm busy with a couple of things right now, I'll install TQSL from scratch and keep track of all the dependencies I must add over the weekend.

73,
Harry W3YJ

On Thu, Nov 19, 2020 at 5:11 PM Dave, W1HKJ <w1hkj@...> wrote:
I am able to satisfy all of the TrustedQSL dependencies using either Synaptic or Aptitude.  The process would be much simpler for a Linux tyro if there were build-dep scripts available on the various repositories.  Especially true for the Pi series since we are likely to see many Windows converts trying Linux for the first time.

Dave

On 11/19/20 2:25 PM, Dave Slotter, W3DJS wrote:
Dave,

I have a build process using Ansible that successfully builds TQSL on Linux. It's in the HamPi GitHub repository.

73,

On Thu, Nov 19, 2020, 1:54 PM Dave, W1HKJ <w1hkj@...> wrote:
How about posting an Alpha to Omega build process for TrustedQSL on a Pi.  Please include items like installing dev packages for OpenSSL and wxWidgets.

David, W1HKJ

On 11/19/20 8:10 AM, Harry Bloomberg, W3YJ wrote:
Thanks!  I will have to check out 2.5.7 later today.

73,
Harry W3YJ

On Thu, Nov 19, 2020 at 8:05 AM w4oa@... <w4oa@...> wrote:
Newer version, 2.5.7, fixes several bugs. Just compiled and installed on RPi 3+ with no problems.

Mitch W4OA
Opelika, AL


--
- Dave
  W3DJS



moderated Re: Anybody else running TQSL?

Dave, W1HKJ
 

Send me an email if you get stuck.

Dave

On 11/19/20 4:15 PM, Harry Bloomberg, W3YJ wrote:

I have a Raspberry Pi 3 that I have not installed TSQL on yet.  I'm busy with a couple of things right now, I'll install TQSL from scratch and keep track of all the dependencies I must add over the weekend.

73,
Harry W3YJ

On Thu, Nov 19, 2020 at 5:11 PM Dave, W1HKJ <w1hkj@...> wrote:
I am able to satisfy all of the TrustedQSL dependencies using either Synaptic or Aptitude.  The process would be much simpler for a Linux tyro if there were build-dep scripts available on the various repositories.  Especially true for the Pi series since we are likely to see many Windows converts trying Linux for the first time.

Dave

On 11/19/20 2:25 PM, Dave Slotter, W3DJS wrote:
Dave,

I have a build process using Ansible that successfully builds TQSL on Linux. It's in the HamPi GitHub repository.

73,

On Thu, Nov 19, 2020, 1:54 PM Dave, W1HKJ <w1hkj@...> wrote:
How about posting an Alpha to Omega build process for TrustedQSL on a Pi.  Please include items like installing dev packages for OpenSSL and wxWidgets.

David, W1HKJ

On 11/19/20 8:10 AM, Harry Bloomberg, W3YJ wrote:
Thanks!  I will have to check out 2.5.7 later today.

73,
Harry W3YJ

On Thu, Nov 19, 2020 at 8:05 AM w4oa@... <w4oa@...> wrote:
Newer version, 2.5.7, fixes several bugs. Just compiled and installed on RPi 3+ with no problems.

Mitch W4OA
Opelika, AL


--
- Dave
  W3DJS



moderated Re: fldigi 4.1.16 Pulse Audio configuration issue #raspberrypi #pi3

Cliff, AE5ZA
 

Dan,

In the Pulse Audio Volume Control config page I have 3 lines, the first two refer to the built in audio. The third is labeled PCM2901 Audio Codec which is the sound card in the rig.  It’s profile is “Analog Stereo Duplex”.

Under Input Devices I show only one item and it is the PCM2901 as well. Output devices has the PCM2901 as the last in a list of 3. Have to scroll down to see it.

Recording has the PCM2901 with a Fldigi icon to the left of it indicating that it is connected to fldigi. I set the volume to 100% and leave that alone. I find it often starts out lower in a new install and it seems like the sound isn’t working, but it’s just too low.

Playback shows two lines and the second is the PCM2901 with a fldigi icon and again set at 100%. With that too low you won’t see TX power out or very weak power.

Hope this helps.

73,
Cliff, AE5ZA

On Nov 19, 2020, at 10:48, Dave - N9QNZ <dave@...> wrote:

Sorry...should have added that you should ignore the top line (xrdp).  I'm working on routing audio over a remote desktop session to the Raspberry Pi.

On Thu, Nov 19, 2020 at 11:47 AM David Vrona <dave@...> wrote:
I think your recording tab should look like the attached.

On Thu, Nov 19, 2020 at 11:31 AM Dan, N1UKJ <uspt@...> wrote:
hi Cliff - AE5ZA,

well, i can't say all is working just yet but we did get rid of the roadblock - "Server String" texbox issue !

could you provide me with the setting on your RaspberryPi in the Pulse Audio Volume Control panel, specifically
in the Configuration tab ?

i'm interested in knowing what you have showing for those 3 settings.

thanks,
73's
dan - N1UKJ




moderated Re: Anybody else running TQSL?

Harry Bloomberg, W3YJ
 

I have a Raspberry Pi 3 that I have not installed TSQL on yet.  I'm busy with a couple of things right now, I'll install TQSL from scratch and keep track of all the dependencies I must add over the weekend.

73,
Harry W3YJ


On Thu, Nov 19, 2020 at 5:11 PM Dave, W1HKJ <w1hkj@...> wrote:
I am able to satisfy all of the TrustedQSL dependencies using either Synaptic or Aptitude.  The process would be much simpler for a Linux tyro if there were build-dep scripts available on the various repositories.  Especially true for the Pi series since we are likely to see many Windows converts trying Linux for the first time.

Dave

On 11/19/20 2:25 PM, Dave Slotter, W3DJS wrote:
Dave,

I have a build process using Ansible that successfully builds TQSL on Linux. It's in the HamPi GitHub repository.

73,

On Thu, Nov 19, 2020, 1:54 PM Dave, W1HKJ <w1hkj@...> wrote:
How about posting an Alpha to Omega build process for TrustedQSL on a Pi.  Please include items like installing dev packages for OpenSSL and wxWidgets.

David, W1HKJ

On 11/19/20 8:10 AM, Harry Bloomberg, W3YJ wrote:
Thanks!  I will have to check out 2.5.7 later today.

73,
Harry W3YJ

On Thu, Nov 19, 2020 at 8:05 AM w4oa@... <w4oa@...> wrote:
Newer version, 2.5.7, fixes several bugs. Just compiled and installed on RPi 3+ with no problems.

Mitch W4OA
Opelika, AL


--
- Dave
  W3DJS


moderated Re: Anybody else running TQSL?

Dave, W1HKJ
 

I am able to satisfy all of the TrustedQSL dependencies using either Synaptic or Aptitude.  The process would be much simpler for a Linux tyro if there were build-dep scripts available on the various repositories.  Especially true for the Pi series since we are likely to see many Windows converts trying Linux for the first time.

Dave

On 11/19/20 2:25 PM, Dave Slotter, W3DJS wrote:

Dave,

I have a build process using Ansible that successfully builds TQSL on Linux. It's in the HamPi GitHub repository.

73,

On Thu, Nov 19, 2020, 1:54 PM Dave, W1HKJ <w1hkj@...> wrote:
How about posting an Alpha to Omega build process for TrustedQSL on a Pi.  Please include items like installing dev packages for OpenSSL and wxWidgets.

David, W1HKJ

On 11/19/20 8:10 AM, Harry Bloomberg, W3YJ wrote:
Thanks!  I will have to check out 2.5.7 later today.

73,
Harry W3YJ

On Thu, Nov 19, 2020 at 8:05 AM w4oa@... <w4oa@...> wrote:
Newer version, 2.5.7, fixes several bugs. Just compiled and installed on RPi 3+ with no problems.

Mitch W4OA
Opelika, AL


--
- Dave
  W3DJS


moderated Re: Anybody else running TQSL?

Dave Slotter, W3DJS
 

Dave,

I have a build process using Ansible that successfully builds TQSL on Linux. It's in the HamPi GitHub repository.

73,

On Thu, Nov 19, 2020, 1:54 PM Dave, W1HKJ <w1hkj@...> wrote:
How about posting an Alpha to Omega build process for TrustedQSL on a Pi.  Please include items like installing dev packages for OpenSSL and wxWidgets.

David, W1HKJ

On 11/19/20 8:10 AM, Harry Bloomberg, W3YJ wrote:
Thanks!  I will have to check out 2.5.7 later today.

73,
Harry W3YJ

On Thu, Nov 19, 2020 at 8:05 AM w4oa@... <w4oa@...> wrote:
Newer version, 2.5.7, fixes several bugs. Just compiled and installed on RPi 3+ with no problems.

Mitch W4OA
Opelika, AL


--
- Dave
  W3DJS


moderated Re: Anybody else running TQSL?

Dave, W1HKJ
 

How about posting an Alpha to Omega build process for TrustedQSL on a Pi.  Please include items like installing dev packages for OpenSSL and wxWidgets.

David, W1HKJ

On 11/19/20 8:10 AM, Harry Bloomberg, W3YJ wrote:

Thanks!  I will have to check out 2.5.7 later today.

73,
Harry W3YJ

On Thu, Nov 19, 2020 at 8:05 AM w4oa@... <w4oa@...> wrote:
Newer version, 2.5.7, fixes several bugs. Just compiled and installed on RPi 3+ with no problems.

Mitch W4OA
Opelika, AL


moderated Re: strange issue - random PTT

Wolfgang OH6DL
 

I did make same observation, Pi4, IC-7200, FLDigi 4.1.16.01. Does appear independently of modem used. Did not appear on 4.1.16.

73´s, Wolfgang


moderated Re: strange issue - random PTT

Bernie, AF9US <AF9US@...>
 

Dave - N9QNZ:

One possibility is your setup could have Beaconing enabled.  I am not familiar with the majority of your setup and therefore cannot suggest where to look for a Beaconing setting.

Regards,
Bernie, AF9US


On Nov 19, 2020, at 8:58 AM, Dave - N9QNZ <dave@...> wrote:

Hi All,

I'm not sure where to go for advice on this issue.  I've been testing a relatively new setup with the following components:

Raspberry Pi 4
MiniPro SC (audio interface)
fldigi
flrig
TS-480SAT
Wellbrook receiving loop

I've been testing receive only while waiting on a Chameleon antenna delivery.  Most of my time has been spent playing around with WEFAX or PSK31 decoding.  At no time have I ever tried any form of transmit with this setup.

From time to time, I find the TS-480SAT in transmit.  I have had the power dialed down to the minimum and no mic connected but PTT is "on" in flrig which I presume it is reading from the radio.  I can't for the life of me understand what might be triggering this condition so I thought I would post here to see if anyone else here has experienced this.  I'll also post to the TS-480 group.

thanks,
Dave





moderated strange issue - random PTT

Dave - N9QNZ <dave@...>
 

Hi All,

I'm not sure where to go for advice on this issue.  I've been testing a relatively new setup with the following components:

Raspberry Pi 4
MiniPro SC (audio interface)
fldigi
flrig
TS-480SAT
Wellbrook receiving loop

I've been testing receive only while waiting on a Chameleon antenna delivery.  Most of my time has been spent playing around with WEFAX or PSK31 decoding.  At no time have I ever tried any form of transmit with this setup.

From time to time, I find the TS-480SAT in transmit.  I have had the power dialed down to the minimum and no mic connected but PTT is "on" in flrig which I presume it is reading from the radio.  I can't for the life of me understand what might be triggering this condition so I thought I would post here to see if anyone else here has experienced this.  I'll also post to the TS-480 group.

thanks,
Dave




moderated Re: fldigi 4.1.16 Pulse Audio configuration issue #raspberrypi #pi3

Dave - N9QNZ <dave@...>
 

Sorry...should have added that you should ignore the top line (xrdp).  I'm working on routing audio over a remote desktop session to the Raspberry Pi.

On Thu, Nov 19, 2020 at 11:47 AM David Vrona <dave@...> wrote:
I think your recording tab should look like the attached.

On Thu, Nov 19, 2020 at 11:31 AM Dan, N1UKJ <uspt@...> wrote:
hi Cliff - AE5ZA,

well, i can't say all is working just yet but we did get rid of the roadblock - "Server String" texbox issue !

could you provide me with the setting on your RaspberryPi in the Pulse Audio Volume Control panel, specifically
in the Configuration tab ?

i'm interested in knowing what you have showing for those 3 settings.

thanks,
73's
dan - N1UKJ


moderated Re: fldigi 4.1.16 Pulse Audio configuration issue #raspberrypi #pi3

Dave - N9QNZ <dave@...>
 

I think your recording tab should look like the attached.

On Thu, Nov 19, 2020 at 11:31 AM Dan, N1UKJ <uspt@...> wrote:
hi Cliff - AE5ZA,

well, i can't say all is working just yet but we did get rid of the roadblock - "Server String" texbox issue !

could you provide me with the setting on your RaspberryPi in the Pulse Audio Volume Control panel, specifically
in the Configuration tab ?

i'm interested in knowing what you have showing for those 3 settings.

thanks,
73's
dan - N1UKJ


moderated Re: fldigi 4.1.16 Pulse Audio configuration issue #raspberrypi #pi3

dan n1ukj
 

hi Cliff - AE5ZA,

well, i can't say all is working just yet but we did get rid of the roadblock - "Server String" texbox issue !

could you provide me with the setting on your RaspberryPi in the Pulse Audio Volume Control panel, specifically
in the Configuration tab ?

i'm interested in knowing what you have showing for those 3 settings.

thanks,
73's
dan - N1UKJ


moderated Re: Anybody else running TQSL?

Harry Bloomberg, W3YJ
 

Thanks!  I will have to check out 2.5.7 later today.

73,
Harry W3YJ


On Thu, Nov 19, 2020 at 8:05 AM w4oa@... <w4oa@...> wrote:
Newer version, 2.5.7, fixes several bugs. Just compiled and installed on RPi 3+ with no problems.

Mitch W4OA
Opelika, AL


moderated Re: Anybody else running TQSL?

w4oa@arrl.net <w4oa@...>
 

Newer version, 2.5.7, fixes several bugs. Just compiled and installed on RPi 3+ with no problems.

Mitch W4OA
Opelika, AL


moderated Re: AndFLMsg Contestian Mkde Request

John (vk2eta)
 

Sorry, not ....AndPskmail... but ...AndFlmsg...

Time to go to bed...

73, John


moderated Re: AndFLMsg Contestian Mkde Request

John (vk2eta)
 

Hello Kevin and other users of AndFlmsg,

Here is an Alpha version of AndPskmail with the following changes:

1. Added Contestia modes and RSIDs. Sending of Flmsg messages is blocked in these modes since the character set is too constrained.

2. The free text entry field in the terminal screen survives the change of screens. So if you swipe to the modem screen and back, the text typed in is now preserved. Also when the Send Text key is pressed, the text entered is cleared.

3. Added all the DominoEx and Thor modes that were missing, plus their RSIDs (eg THOR5 and others).

4. So changes to the size of the waterfall (still work in progress). 

Please test and report.

Link: https://drive.google.com/file/d/1j4SN43Qq4OJxxT7rjgAcfEL3TN5H4-V_/view?usp=sharing

Thanks and 73,

John (VK2ETA)


moderated Re: TAPR 30M WSPR-PI kit instructions #raspberrypi #wsjtx

w4oa@arrl.net <w4oa@...>
 

Thanks, that helps, at least a side view of the assembled kit board. But, still no component values for the output filter on the schematic. I'll look at some 30m filter designs and I should be able to figure out the component values.

I'll post back with the filter values once I get them figured out.

Mitch, W4OA
Opelika AL


moderated Re: TAPR 30M WSPR-PI kit instructions #raspberrypi #wsjtx

Dave, GØWBX
 

I just found this, including the schematic.   Was indeed "Very Well hidden"...

https://web.tapr.org/pdf/WSPR-WIthout-Tears-30m-and-40m.pdf

Should help somewhat perhaps.

73.

Dave G0WBX.


--
Created on and sent from a Unix like PC running and using free and open source software:


moderated Re: TAPR 30M WSPR-PI kit instructions #raspberrypi #wsjtx

w4oa@arrl.net <w4oa@...>
 

Yes Robin, I had tried the wayback machine! I also sent an email to TAPR but based upon prior experience, they are a little slow to respond. If I get the instructions, i'l put them in the files section here. If not, I'll slug through which component goes where...

Mitch, W4OA

6101 - 6120 of 49476