I am just passed the stage of turning on my slop bucket 2 for 40M. happy to report I have a good display, did find one missed solder joint in the audio receive circuit. I found that Q10 on the PCB is label Q23 in the schematic.
My wish list would be
1.Block diagram showing signal flow and gain
2. DC voltage reading especially on the control transistors that is selecting the receive and transmit signals.
I have not install IRF510B yet, I am wanting to increase the heat sink, I am looking for a .6 x 1 x 1 piece of aluminum and I have not figures out the enclosure size yet. I assume the heat sink that close to the toroids coils is not an issuse?
My enclosure will probably be made out of single sided PCB so I have some choices. My unit will probably be use inside since I gotten to old do any camping so size and weight does not enter into the equation.
Thanks for any help with the above, remember this is a wish list not gripe list, I appricate the work Steve have put into this project is sharing it with us.