Re: Slop Bucket manual addendum

Kelly Jack
 

The power supply on my PCB for the digital parts of the circuit takes its supply directly after the diode, between the D9 and F1 and so is not fused.  Only the supply to the A5V and the PA stages appears to be fused.

Looks like it will require a trace cut and a jumper from the unused hole on the 12V line (its marked "PA") to the trace cut just after the cathode of D9 on the trace to R66.

Is this worth doing?

Regards


Simon

Join kd1jvdesigns@groups.io to automatically receive all group messages.