So here it is again... -------- Forwarded Message -------- Subject: K16-EXT Wanted Date: Mon, 17 Apr 2023 23:04:26 -0500 From: Jim W7RY <jimw7ry@...> Reply-To: jimw7ry@... To: k1elsystems@groups.io He

I built my Winkeyer USB in 2010,, Version 1.H, and it doesn't seem to like Windows 10. Is there a way I can update the Winkey chip to a later version so Ican get the necessary drivers and software? Da

I loaded the USB driver and plugged in the K45 and ran the port scan ap says Com 3 is in use but when I try to connect with WK tools I get an error and can't connect.

Canot get the software to see the device, under device I see com 3 but when I use the port scan app it doesn't show my device.

Hi. I’m a blind user, with NVDA, Jaws, and Narrator screenreaders available, on a Windows 10 PC. I’m partly up and running with my WinKeyer USB. I have the driver installed, and the correct comport se

Has anyone had an issue when manually keying while DM780 is connected to the WK? I was testing DM780 and had to take over a QSO manually. It sometimes seemed to pause for a few milliseconds when trans

When is she gonna be done baking, Steve? :) :) Michael N6MST

My current radio is the IC-7300 and I operate remotely from time to time. I use the RS-BA1 Software with N1MM along with PSTRotator software to manage the beam. Both RS-BA1 and N1MM do very well sendi

After completely resetting my Icom 7300 and reconfiguring my Winkeyer USB, was able to actually key the Icom for transmitting. Unfortunately, what I'm writing in the DM780 text for transmit is not bei

So I got the WK3 IC today and installed it on my old WK2. Everything seems to be working okay. I know from other software Get Pot Speed is returning 15. The API specifies a range of 0 to 31. However t

It has been a while since I used my Icom 7300 in conjunction with my Winkeyer USB and HRD software. I just retired and am putting the station back together again. I have successfully connected the rig

I actually have one question, but about two different rigs. Can anyone tell me how to connect the CWR feature of the K-45 to an IC-7300 and an FT-891 (not at the same time) so that I can hear the acti

I have a Winkeyer2 purchased way back in 2006. Just found out that it can be upgraded to a Winkeyer3 by purchasing an upgrade IC and downloading some firmware. I hope my version can be upgraded. It ce

I am having trouble decreasing my speed with the keyer. I have max at 30 wpm and min. to wpm. But at it's sending no less than aprox. 20 WPM. How cant I reduce the speed below 20 WPM. Tnx -- 73'S DAVE

Hi all, I have the opportunity to borrow a K42 from a fellow ham. I was wondering if it would be usable as a replacement for the WinKeyer? What I am trying to do is use my Elecraft KX3 with SkookumLog

Isnt the ch340 or ftdi just a driver on your pc??? Uninstall ch340 and reinstall ftdi driver. All should be good. sent by ve3wej on lg phone

Is there an app for MacOS that can be used to program Winkeyer3 for standalone mode? I used to use WK3Tools on Windows when I wanted to update the standalone settings, but recently I converted my stat

I am using the WinKey Mini hooked up to my ICOM 7300. Works great but I can't seem to get the speed below 20 WPM. Any help would be appreciated. Thanks -- 73'S DAVE NU4N.

I was playing around with my WinKey Mini today and I must have changed a setting. I have my keyer interfaced with ACLOG with cw macros. I adjusted the speed down to 3 WPM but it's sending around 20 WP

Hi, Trying to set up the K45 to be heard in a Zoom session for CW training. Device Manager sees the K45. I looking to be able to practice sending with a iambic paddle and still be able to to use the m