Date   

Re: lower jaws volume

Mike B <mb69mach1@...>
 

Hi Lenny,
 
Open the Speaker folder in the system tray and then open the Volume mixer.  Tab through to find the soundcard and there should be a volume control for this particular soundcard there.  You could also open Playback devices and change the volume for the soundcard in question there as well.  If you don't have the Speaker icon in the system tray go to the Control Panel / Sounds link to find the, Playback tab to choose your soundcard there.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
If at first you DO succeed, try not to look astonished!

----- Original Message -----
Sent: Wednesday, June 26, 2019 2:54 PM
Subject: [jaws-users] lower jaws volume

I just installed a new ex sound card to use with ear buds. They now are a wonderful ear cleaner, it blew the wax right out of my ears. How can I lower the sound for a specific sound device that I am trying to use with jaws. There is nothing on the task bar and I thought that would be only for the main sound card.


 

---

Please visit my web page

It’s motivational, inspirational with a touch of humor

There is also a very extensive resource list for the blind

https://www.LennyMcHugh.com

International Brotherhood of Magicians member #43990


Re: Microsoft Word Forms

Victor Gouveia <victor.gouveia@...>
 

I would also like to know how to fill out Word forms.
 
All the documentation talks about creating Word forms, but I haven’t found any that tell you how to fill them out.
 
So, if anyone knows how to do this, or where I can find this stuff, I would really appreciate it.
 
Victor
 

From: Kathryn.Frederick@...
Sent: Wednesday, June 26, 2019 1:31 PM
To: JAWS Users List (jaws-users-list@groups.io)
Subject: [jaws-users] Microsoft Word Forms
 

Hello,

 

Is anyone familiar with creating and/or editing forms in Microsoft Word 2016/Office 365? I’m using JAWS 2019.1904.60 on my Windows 10 machine. I know Freedom Scientific Published This Documentation, that references creating forms in Word 2007-2013, but wondering if anyone has more up-to-date material on this topic?

 

Thank you in advance for your feedback.

 

Sincerely,

 

Katie Frederick


lower jaws volume

Lenny McHugh <LennyMcHugh@...>
 

I just installed a new ex sound card to use with ear buds. They now are a wonderful ear cleaner, it blew the wax right out of my ears. How can I lower the sound for a specific sound device that I am trying to use with jaws. There is nothing on the task bar and I thought that would be only for the main sound card.


 

---

Please visit my web page

It’s motivational, inspirational with a touch of humor

There is also a very extensive resource list for the blind

https://www.LennyMcHugh.com

International Brotherhood of Magicians member #43990


Re: Excel Formula

Brian Lee
 

Hello Steve,

 

You might try using the following formula.  You will need to change the cell designations.  The following formula assumes there is either a Yes or a No in cells B1 through and including B10.  You can use the following formula anywhere but for this example it is going into cell B11.  After using the formula you might need to use the keystroke of CTRL with Shift and number 5  in the cell where the result goes to change the cell formatting to percentage.  To try it out just copy the following formula and paste it into the cell where you want the percentage.    

 

=COUNTIF(b1:b10, "Yes")/COUNTA(b1:b10)

 

I hope this is what you are needing. 

 

Take care.

 

Brian Lee

brianllee@...

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Steve & Shannon Cook
Sent: June 25, 2019 4:17 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Excel Formula

 

Hi All,

 

Using Excel 2016, Windows 10 and the current version of JAWS.  I have an Excel sheet in column A I have the task a person must perform.  In Column B I will answer yes or no if they can perform the task.  Here is my issue, I want to create a formula at the bottom of column B to determine if they answered yes to 80% of the questions.  I would greatly appreciate your assistance!

 

Steve


Re: iTunes, jaws 2019 and iCloud

Holger Fiallo
 

Thanks but I fixed the problem. I got iTunes to show iCloud.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Don & Cher
Sent: Wednesday, June 26, 2019 2:12 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] iTunes, jaws 2019 and iCloud

 

Apple will notify you of updates unless you have disabled this.

 

Cher

 

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Holger Fiallo
Sent: Monday, June 24, 2019 3:52 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] iTunes, jaws 2019 and iCloud

 

OK. When I open iTunes and go alt f and down to library, I only see update genious and turn off genious. Before I saw update iCloud. I want to know how to get my music in iTunes to iCloud. Using current iTunes, windows 10 current, and jaws 2019. Help be nice.


Re: iTunes, jaws 2019 and iCloud

Cher
 

Apple will notify you of updates unless you have disabled this.

 

Cher

 

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Holger Fiallo
Sent: Monday, June 24, 2019 3:52 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] iTunes, jaws 2019 and iCloud

 

OK. When I open iTunes and go alt f and down to library, I only see update genious and turn off genious. Before I saw update iCloud. I want to know how to get my music in iTunes to iCloud. Using current iTunes, windows 10 current, and jaws 2019. Help be nice.


Re: getting out of spellcheck in MS Word 265

Van Lant, Robin
 

We have Office 365 here, but I’m only on Word and Outlook 2016.  I wonder if you are on Word 2019 and the feature doesn’t work there.  WE can post to this list with a different subject line to see if that is the case.   I’m using the April or May release of JAWS 2019. 

 

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of CJ &AA MAY
Sent: Wednesday, June 26, 2019 11:13 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

I couldn’t get the alt shift l option to work. I am using Office 365 – which version are you using or perhaps I need to initiate something in Jaws?

Alison

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 25 June 2019 23:39
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

Allison,

I like the Alt Shift L option when I know there are a lot of words that will flag as misspelled, but aren’t.  The dialog gives you a list of what  thinks are mistakes and you can just arrow down past the ones you know are actually correct. When you find one you want to check or correct, hit enter and you’ll be taken right to the word.  Then, you can hist the application key to open a list of correction choices. 

 

Alt F7 moves from mistake to mistake, but it opens the list of corrections for you.  If you know you have odd words that it will flag, then it feels more clunky to me to have to listen the extra JAWS babble before I know the word it’s flagged and then have to hit escape.

 

I use both methods pretty regularly.

 

 

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of CJ &AA MAY
Sent: Tuesday, June 25, 2019 2:46 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

I didn’t know this command, so thank you.

Alison

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 25 June 2019 18:24
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

Allison,

If you don’t figure this out, you might try the alternative of Shift alt L to bring up a list of spelling issues or Alt F7 to move to mistake to mistake.  I’ve really gotten away from the standard F7 method as of late.

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of CJ &AA MAY
Sent: Sunday, June 23, 2019 4:45 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

 escape worked with earlier versions but not now. 

by Alison may

0777 315 8181


On 23 Jun 2019, at 10:06 am, Mike Ulrich <mulrich@...> wrote:

I just hit the escape key; and I’m back in the word document. But I am running an older set up. I’m running Windows 7, with jaws 18, and Microsoft word 2010. Hope this might help.


On Jun 23, 2019, at 4:58 AM, CJ &AA MAY <chrisalismay@...> wrote:

I have created a very long document and spellchecking it is proving a real pain. Occasionally the spellchecker will come up with something and I want to then come out of the spellcheck and look at the document but I’m stuck there. The only way of escaping seems to be to press f4 and exit the document entirely and then go back in.

Any suggestons?

Alison



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Microsoft Word Forms

Kathryn.Frederick@ood.ohio.gov
 

Hello,

 

Is anyone familiar with creating and/or editing forms in Microsoft Word 2016/Office 365? I’m using JAWS 2019.1904.60 on my Windows 10 machine. I know Freedom Scientific Published This Documentation, that references creating forms in Word 2007-2013, but wondering if anyone has more up-to-date material on this topic?

 

Thank you in advance for your feedback.

 

Sincerely,

 

Katie Frederick


Re: getting out of spellcheck in MS Word 265

Justin Williams
 

word is what I'm using. word 2016

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of CJ &AA MAY
Sent: Wednesday, June 26, 2019 1:13 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

I couldn’t get the alt shift l option to work. I am using Office 365 – which version are you using or perhaps I need to initiate something in Jaws?

Alison

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 25 June 2019 23:39
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

Allison,

I like the Alt Shift L option when I know there are a lot of words that will flag as misspelled, but aren’t.  The dialog gives you a list of what  thinks are mistakes and you can just arrow down past the ones you know are actually correct. When you find one you want to check or correct, hit enter and you’ll be taken right to the word.  Then, you can hist the application key to open a list of correction choices. 

 

Alt F7 moves from mistake to mistake, but it opens the list of corrections for you.  If you know you have odd words that it will flag, then it feels more clunky to me to have to listen the extra JAWS babble before I know the word it’s flagged and then have to hit escape.

 

I use both methods pretty regularly.

 

 

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of CJ &AA MAY
Sent: Tuesday, June 25, 2019 2:46 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

I didn’t know this command, so thank you.

Alison

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 25 June 2019 18:24
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

Allison,

If you don’t figure this out, you might try the alternative of Shift alt L to bring up a list of spelling issues or Alt F7 to move to mistake to mistake.  I’ve really gotten away from the standard F7 method as of late.

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of CJ &AA MAY
Sent: Sunday, June 23, 2019 4:45 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

 escape worked with earlier versions but not now. 

by Alison may

0777 315 8181


On 23 Jun 2019, at 10:06 am, Mike Ulrich <mulrich@...> wrote:

I just hit the escape key; and I’m back in the word document. But I am running an older set up. I’m running Windows 7, with jaws 18, and Microsoft word 2010. Hope this might help.


On Jun 23, 2019, at 4:58 AM, CJ &AA MAY <chrisalismay@...> wrote:

I have created a very long document and spellchecking it is proving a real pain. Occasionally the spellchecker will come up with something and I want to then come out of the spellcheck and look at the document but I’m stuck there. The only way of escaping seems to be to press f4 and exit the document entirely and then go back in.

Any suggestons?

Alison



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Re: getting out of spellcheck in MS Word 265

CJ &AA MAY
 

I couldn’t get the alt shift l option to work. I am using Office 365 – which version are you using or perhaps I need to initiate something in Jaws?

Alison

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 25 June 2019 23:39
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

Allison,

I like the Alt Shift L option when I know there are a lot of words that will flag as misspelled, but aren’t.  The dialog gives you a list of what  thinks are mistakes and you can just arrow down past the ones you know are actually correct. When you find one you want to check or correct, hit enter and you’ll be taken right to the word.  Then, you can hist the application key to open a list of correction choices. 

 

Alt F7 moves from mistake to mistake, but it opens the list of corrections for you.  If you know you have odd words that it will flag, then it feels more clunky to me to have to listen the extra JAWS babble before I know the word it’s flagged and then have to hit escape.

 

I use both methods pretty regularly.

 

 

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of CJ &AA MAY
Sent: Tuesday, June 25, 2019 2:46 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

I didn’t know this command, so thank you.

Alison

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 25 June 2019 18:24
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

Allison,

If you don’t figure this out, you might try the alternative of Shift alt L to bring up a list of spelling issues or Alt F7 to move to mistake to mistake.  I’ve really gotten away from the standard F7 method as of late.

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of CJ &AA MAY
Sent: Sunday, June 23, 2019 4:45 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] getting out of spellcheck in MS Word 265

 

 escape worked with earlier versions but not now. 

by Alison may

0777 315 8181


On 23 Jun 2019, at 10:06 am, Mike Ulrich <mulrich@...> wrote:

I just hit the escape key; and I’m back in the word document. But I am running an older set up. I’m running Windows 7, with jaws 18, and Microsoft word 2010. Hope this might help.


On Jun 23, 2019, at 4:58 AM, CJ &AA MAY <chrisalismay@...> wrote:

I have created a very long document and spellchecking it is proving a real pain. Occasionally the spellchecker will come up with something and I want to then come out of the spellcheck and look at the document but I’m stuck there. The only way of escaping seems to be to press f4 and exit the document entirely and then go back in.

Any suggestons?

Alison



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Re: Which Version of J2018 to Download

Margaret Thomas
 

Thanks, Mike and John. I got the job done. I couldn't remember being asked about tandem versions before. My brain has been on vacation.

Margaret

On 6/23/2019 10:09 PM, Mike B wrote:

Hi Margaret,
I would suggest that you download and install the tandem versions just in case you ever run into that time when you need it!  You know the old saying, It's better to have it and not need it, verses needing it but not having it!  It won't cause any harm having the extra feature.  If you choose to do so, the direct download links are below for the latest versions of both J2018 and J2019.  Also, it doesn't matter whether it's Home or Pro they'll both work the same except now the Pro version is usually used in only a multiple computer licensing application, as in a business type atmosphere.
J2018 64 bit:
http://jaws2018.vfo.digital/181130WAGLIU/J2018.1811.30.400-enu-x64.exe
J2019 64 32 & bit:
http://jaws2019.vfo.digital/2019.1906.10.400/7B4440D3-D549-4F90-82BB-936902A2EE5B/J2019.1906.10-any.exe
Take care. Mike.  Sent from my iBarstool.  Go dodgers!
If at first you DO succeed, try not to look astonished!
----- Original Message -----
*From:* Margaret Thomas <mailto:iluvtoread@cox.net>
*To:* JAWS-Users <mailto:jaws-users-list@groups.io>
*Sent:* Sunday, June 23, 2019 6:50 PM
*Subject:* [jaws-users] Which Version of J2018 to Download
Hi, All:
I have J16 to 2019 on this 64 bit Windows 7 Home machine and am being
nagged about a new update being available.  I thought I would take care
of 2018 first and don't know if I should download the tandem version or
non-tandem one at:
https://support.freedomscientific.com/Downloads/JAWS/PreviousVersions
I have never helped anyone using a tandem session or been helped using
one other than when tech support has done a remote session.
When I first purchased JAWS, I had the home or personal version rather
than the pro one.  In about for J2019, it says that remote session and
tandem direct are both disabled.  This leads me to think I want the 64
bit non-tandem version.  Is this correct?
Any help is greatly appreciated.
Margaret


Re: reposting question reading unlabeled graphics

Rick Justice <ricjustice@...>
 

Hi Adrian,
No problem, just wanted to let you know that the messages were making it
here.
Glad you found the cause!

HTH,
Rick Justice

"Tomorrow's another day, another way!"
"and if tomorrow never comes, problem solved!"

----- Original Message -----
From: "Adrian Spratt" <adrian@adrianspratt.com>
To: <jaws-users-list@groups.io>
Sent: Wednesday, June 26, 2019 7:15 AM
Subject: Re: [jaws-users] reposting question reading unlabeled graphics


Rick and list,

I'm mortified this morning to find that my spam filter held back not only my
repeated posts, but also everyone's replies. It never occurred to me that my
filter would censor my own messages! Nor do I have any idea what convinced
the filter that this topic was spam. So my apologies, and I'll try to keep
this experience in mind if something similar happens in the future.

-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of
Rick Justice
Sent: Tuesday, June 25, 2019 4:02 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] reposting question reading unlabeled graphics

Hi Adrian,
In fact, your original post did show up here, I saw it earlier today.
And twice just now.

HTH,
Rick Justice

"Tomorrow's another day, another way!"
"and if tomorrow never comes, problem solved!"

----- Original Message -----
From: "Adrian Spratt" <adrian@adrianspratt.com>
To: <jaws-users-list@groups.io>
Sent: Tuesday, June 25, 2019 12:48 PM
Subject: [jaws-users] reposting question reading unlabeled graphics


I'm resubmitting this post because it didn't appear when I first sent it.

From: Adrian Spratt
Sent: Tuesday, June 25, 2019 8:25 AM
To: 'jaws-users-list@groups.io' <jaws-users-list@groups.io>
Subject: RE: [jaws-users] reposting question reading unlabeled graphics

Vicki,

If I understand your query correctly, you want JAWS to read unlabeled
graphics in email. Almost by definition, JAWS can't read graphics that
aren't labeled.

What JAWS can do is enable you to assign labels when you figure out what a
graphic represents. This works with browsers, and it probably also works
with email. If you're getting email from the same source with unlabeled
graphics, you might try to figure out what they each stand for and assign
your own label. Sometimes you can figure it out by clicking on a link and
finding where it takes you. Sometimes context gives it away. Otherwise, you
may need someone with vision to interpret for you, and then you can assign a
label for when the graphic appears the next time.

From: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
<jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>> On Behalf Of
Vicki W
Sent: Monday, June 24, 2019 11:40 AM
To: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
Subject: Re: [jaws-users] reposting question reading unlabeled graphics

No, that didn't work. Still just says the word link and the word graphic.

Vicki

----- Original Message -----
From: David Goldfield<mailto:david.goldfield@outlook.com>
To: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
Sent: Sunday, June 23, 2019 9:45 AM
Subject: Re: [jaws-users] reposting question reading unlabeled graphics


Hi, Vicki.

Try this. Press insert-V go enter the JAWS Options dialog.

2. Begin typing in the word "graphic" without the quotes. Typing graph
should suffice.

3. Press down arrow. Look for the "graphics" option. Pressing the space key
should toggle between all, none and labeled.

Does that help?
David Goldfield, Assistive Technology Specialist
WWW.David-Goldfield.Com<http://www.David-Goldfield.Com>
On 6/23/2019 12:35 PM, Vicki W wrote:
I posted this question awhile ago and didn't receive an answer so I thought
I'd try again.
Is there a way to read unlabeled graphics in an e-mail with JAWS 2019? Seems
like there was.

Thanks.

Vicki


Re: reposting question reading unlabeled graphics

Mike B <mb69mach1@...>
 

Hi Adrian,
 
No worries!  I guess that would fall under the category of, SH*T happens!  LOL  Glad it was something that easy, so to speak, and not some kind of ISP issue.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
If at first you DO succeed, try not to look astonished!

----- Original Message -----
Sent: Wednesday, June 26, 2019 4:15 AM
Subject: Re: [jaws-users] reposting question reading unlabeled graphics

Rick and list,

I'm mortified this morning to find that my spam filter held back not only my repeated posts, but also everyone's replies. It never occurred to me that my filter would censor my own messages! Nor do I have any idea what convinced the filter that this topic was spam. So my apologies, and I'll try to keep this experience in mind if something similar happens in the future.

-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Rick Justice
Sent: Tuesday, June 25, 2019 4:02 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] reposting question reading unlabeled graphics

Hi Adrian,
In fact, your original post did show up here, I saw it earlier today.
And twice just now.

HTH,
Rick Justice

"Tomorrow's another day, another way!"
"and if tomorrow never comes, problem solved!"

----- Original Message -----
From: "Adrian Spratt" <adrian@...>
To: <jaws-users-list@groups.io>
Sent: Tuesday, June 25, 2019 12:48 PM
Subject: [jaws-users] reposting question reading unlabeled graphics


I'm resubmitting this post because it didn't appear when I first sent it.

From: Adrian Spratt
Sent: Tuesday, June 25, 2019 8:25 AM
To: 'jaws-users-list@groups.io' <jaws-users-list@groups.io>
Subject: RE: [jaws-users] reposting question reading unlabeled graphics

Vicki,

If I understand your query correctly, you want JAWS to read unlabeled
graphics in email. Almost by definition, JAWS can't read graphics that
aren't labeled.

What JAWS can do is enable you to assign labels when you figure out what a
graphic represents. This works with browsers, and it probably also works
with email. If you're getting email from the same source with unlabeled
graphics, you might try to figure out what they each stand for and assign
your own label. Sometimes you can figure it out by clicking on a link and
finding where it takes you. Sometimes context gives it away. Otherwise, you
may need someone with vision to interpret for you, and then you can assign a
label for when the graphic appears the next time.

From: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
<jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>> On Behalf Of
Vicki W
Sent: Monday, June 24, 2019 11:40 AM
To: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
Subject: Re: [jaws-users] reposting question reading unlabeled graphics

No, that didn't work. Still just says the word link and the word graphic.

Vicki

----- Original Message -----
From: David Goldfield<mailto:david.goldfield@...>
To: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
Sent: Sunday, June 23, 2019 9:45 AM
Subject: Re: [jaws-users] reposting question reading unlabeled graphics


Hi, Vicki.

Try this. Press insert-V go enter the JAWS Options dialog.

2. Begin typing in the word "graphic" without the quotes. Typing graph
should suffice.

3. Press down arrow. Look for the "graphics" option. Pressing the space key
should toggle between all, none and labeled.

Does that help?
David Goldfield, Assistive Technology Specialist
WWW.David-Goldfield.Com<http://www.David-Goldfield.Com>
On 6/23/2019 12:35 PM, Vicki W wrote:
I posted this question awhile ago and didn't receive an answer so I thought
I'd try again.
Is there a way to read unlabeled graphics in an e-mail with JAWS 2019? Seems
like there was.

Thanks.

Vicki












Re: Pearl camera issue

george b
 

You will need the update for 1803 also

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of chris judge
Sent: June 26, 2019 1:22
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Pearl camera issue

 

These computers are running 1809. Our service desk hasn’t given the go ahead to upgrade to 1903 yet.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of george b
Sent: June 25, 2019 8:18 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Pearl camera issue

 

If you’re running what does 19.03 there is a camera driver update Freedom Scientific email me off-line I’ll send it to you need to install damper work fine


On Jun 25, 2019, at 15:50, chris judge <chrisjudge1967@...> wrote:

Yes I did. It’s on by default. I tried all three settings.

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Steve
Sent: June 25, 2019 6:32 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Pearl camera issue

 

Did you turn on the Pearl camera light?  I don't have time to look up the command, something like control-shift-l.

 

 

 

 

----- Original Message -----

Sent: Tuesday, June 25, 2019 2:51 PM

Subject: [jaws-users] Pearl camera issue

 

Hi folks:

 

Using a HP elite book, windows 10 and jaws 2019.

 

While attempting to use the pearl camera I’m getting the following.

I press insert Space, followed by O, followed by a. The pearl camera is showing, yet when I press acquire I get the message, OCR started. Nothing else happens. I’m not getting the shutter sound and no recognition is happening.

 

Any thoughts?

 

Thanks.

 

Chris.


Re: reposting question reading unlabeled graphics

Adrian Spratt
 

Rick and list,

I'm mortified this morning to find that my spam filter held back not only my repeated posts, but also everyone's replies. It never occurred to me that my filter would censor my own messages! Nor do I have any idea what convinced the filter that this topic was spam. So my apologies, and I'll try to keep this experience in mind if something similar happens in the future.

-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Rick Justice
Sent: Tuesday, June 25, 2019 4:02 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] reposting question reading unlabeled graphics

Hi Adrian,
In fact, your original post did show up here, I saw it earlier today.
And twice just now.

HTH,
Rick Justice

"Tomorrow's another day, another way!"
"and if tomorrow never comes, problem solved!"

----- Original Message -----
From: "Adrian Spratt" <adrian@adrianspratt.com>
To: <jaws-users-list@groups.io>
Sent: Tuesday, June 25, 2019 12:48 PM
Subject: [jaws-users] reposting question reading unlabeled graphics


I'm resubmitting this post because it didn't appear when I first sent it.

From: Adrian Spratt
Sent: Tuesday, June 25, 2019 8:25 AM
To: 'jaws-users-list@groups.io' <jaws-users-list@groups.io>
Subject: RE: [jaws-users] reposting question reading unlabeled graphics

Vicki,

If I understand your query correctly, you want JAWS to read unlabeled
graphics in email. Almost by definition, JAWS can't read graphics that
aren't labeled.

What JAWS can do is enable you to assign labels when you figure out what a
graphic represents. This works with browsers, and it probably also works
with email. If you're getting email from the same source with unlabeled
graphics, you might try to figure out what they each stand for and assign
your own label. Sometimes you can figure it out by clicking on a link and
finding where it takes you. Sometimes context gives it away. Otherwise, you
may need someone with vision to interpret for you, and then you can assign a
label for when the graphic appears the next time.

From: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
<jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>> On Behalf Of
Vicki W
Sent: Monday, June 24, 2019 11:40 AM
To: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
Subject: Re: [jaws-users] reposting question reading unlabeled graphics

No, that didn't work. Still just says the word link and the word graphic.

Vicki

----- Original Message -----
From: David Goldfield<mailto:david.goldfield@outlook.com>
To: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
Sent: Sunday, June 23, 2019 9:45 AM
Subject: Re: [jaws-users] reposting question reading unlabeled graphics


Hi, Vicki.

Try this. Press insert-V go enter the JAWS Options dialog.

2. Begin typing in the word "graphic" without the quotes. Typing graph
should suffice.

3. Press down arrow. Look for the "graphics" option. Pressing the space key
should toggle between all, none and labeled.

Does that help?
David Goldfield, Assistive Technology Specialist
WWW.David-Goldfield.Com<http://www.David-Goldfield.Com>
On 6/23/2019 12:35 PM, Vicki W wrote:
I posted this question awhile ago and didn't receive an answer so I thought
I'd try again.
Is there a way to read unlabeled graphics in an e-mail with JAWS 2019? Seems
like there was.

Thanks.

Vicki


Re: Pearl camera issue

chris judge
 

These computers are running 1809. Our service desk hasn’t given the go ahead to upgrade to 1903 yet.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of george b
Sent: June 25, 2019 8:18 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Pearl camera issue

 

If you’re running what does 19.03 there is a camera driver update Freedom Scientific email me off-line I’ll send it to you need to install damper work fine


On Jun 25, 2019, at 15:50, chris judge <chrisjudge1967@...> wrote:

Yes I did. It’s on by default. I tried all three settings.

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Steve
Sent: June 25, 2019 6:32 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Pearl camera issue

 

Did you turn on the Pearl camera light?  I don't have time to look up the command, something like control-shift-l.

 

 

 

 

----- Original Message -----

Sent: Tuesday, June 25, 2019 2:51 PM

Subject: [jaws-users] Pearl camera issue

 

Hi folks:

 

Using a HP elite book, windows 10 and jaws 2019.

 

While attempting to use the pearl camera I’m getting the following.

I press insert Space, followed by O, followed by a. The pearl camera is showing, yet when I press acquire I get the message, OCR started. Nothing else happens. I’m not getting the shutter sound and no recognition is happening.

 

Any thoughts?

 

Thanks.

 

Chris.


Re: Pearl camera issue

chris judge
 

These HP elites only have 2 USB ports. I will try the other port, can’t remember if I did that or knot. I thought I had, at least on of the computers, but I may not have done. Thanks for the suggestions.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Andy
Sent: June 25, 2019 8:08 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Pearl camera issue

 

Yes!  For example, typically USB ports located on the front face of the machine do not send power to devices.

 

Andy

 

----- Original Message -----

Sent: Tuesday, June 25, 2019 3:55 PM

Subject: Re: [jaws-users] Pearl camera issue

 

If your computer has different ports, try some other ones.

Sometimes only some ports have extra power sent to them.

Glenn

 

Sent: Tuesday, June 25, 2019 5:49 PM

Subject: Re: [jaws-users] Pearl camera issue

 

Interesting. I tried it on 2 of our working computers at work. They are both brand new. I have an older HP that I use for training, and the pearl camera works fine on that one.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Andy
Sent: June 25, 2019 6:22 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Pearl camera issue

 

This would only be an issue if you have an older     PC, but i had a Pearl camera when I was working, and we had a similar issue at first. In this instance, the problem was that the Pearl was connected to a USB-1 port.  It must be connected to at least a USB-2 port because it derives power from that port.

 

Andy

 

----- Original Message -----

Sent: Tuesday, June 25, 2019 11:51 AM

Subject: [jaws-users] Pearl camera issue

 

Hi folks:

 

Using a HP elite book, windows 10 and jaws 2019.

 

While attempting to use the pearl camera I’m getting the following.

I press insert Space, followed by O, followed by a. The pearl camera is showing, yet when I press acquire I get the message, OCR started. Nothing else happens. I’m not getting the shutter sound and no recognition is happening.

 

Any thoughts?

 

Thanks.

 

Chris.


Re: JAWS and Endpoint management System Software

"Marvin Atkins"
 

Thank you for that information Pam
Marvin

-----Original Message-----
From: Ekstrand, Pamela A. -ND
Sent: Tuesday, June 25, 2019 2:03 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] JAWS and Endpoint management System Software

Hi Marvin,

The laptop I received from my company had Symantec Endpoint Protection installed on it, and as Robin said, it just kind of runs in the background. I haven't noticed any negative impacts from it being on my laptop. I use Outlook on the web, Word and Excel, the ServiceNow change management application, puTTY to access servers, and Skype for Business, all on a daily basis.

Pam


________________________________________
From: jaws-users-list@groups.io [jaws-users-list@groups.io] on behalf of Van Lant, Robin via Groups.Io [Robin_Van_Lant=Key.com@groups.io]
Sent: Tuesday, June 25, 2019 1:42 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] JAWS and Endpoint management System Software

I am on Outlook 2016 at work. I think we also used Enpoint when I was on Outlook 2010, but I was also on Window Eyes at that time. I’m a heavy user of Outlook and have not seen any issues. Occasionally I may have a delay as an email is opening, but I cannot say if that is Endpoint or just a general thing. Given al that I read on this list, I do not believe that any weird quirks I have with JAWS are related to Endpoint, since others seem to talk about the same quirks.

Robin



From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of "Marvin Atkins"
Sent: Tuesday, June 25, 2019 11:36 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] JAWS and Endpoint management System Software

Robin,

Thanks for this good info. May I ask, do you use Outlook at work? My wife is currently using Outlook 2010 and is another concern of hers.
Marvin

From: Van Lant, Robin via Groups.Io
Sent: Tuesday, June 25, 2019 1:19 PM
To: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
Subject: Re: [jaws-users] JAWS and Endpoint management System Software

Marvin,
I work at a large bank and Symantec Endpoint is installed on our laptops. I am also on Windows 10 and using JAWS 2019. I have not experienced any issues with Endpoint. It’s just kind of there doing it’s thing and I never pay any attention to it. I see the icon in my system tray, but that’s it.



From: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io> <jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>> On Behalf Of "Marvin Atkins"
Sent: Tuesday, June 25, 2019 10:29 AM
To: jaws-users-list@groups.io<mailto:jaws-users-list@groups.io>
Subject: [jaws-users] JAWS and Endpoint management System Software

Hi group,

My wife is a med. transcriptionist and she uses JAWS 2019 latest with a Win 10(version 1809) operating system. her current employer is asking her to install Endpoint Management System software and she is wondering if anyone on this list has used Endpoint Management software and if it interferes with JAWS in any way? Endpoint Management is a security software that incorporates anti virus, anti malware and lots of other security features onto the computer system and my wife fears if she installs it on her computer that it will screw up her system. Anyone out there have any experience with this software and JAWS?

thanks in advance,
Marvin Atkins


This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


Re: Excel Formula

Chris Chaffin
 


I do not know what cell in column B your answers will start and end in.  But here is a formula that you can use.

=countif(b1:b20,"yes")/counta(b1:b20) 

Now, you will have to put in the cells that are covered in column b for b1 and b20 that I put in the formula.
The formula basically counts each cell that has a yes in it for your cell range in column b, and divides it by the total cells that contain answers in your range in column b.

One more thing that you will have to do is to format that cell as a percentage so it will show as a percentage and not a decimal.

Hope this helps.

Chris


On Jun 25, 2019, at 7:16 PM, Steve & Shannon Cook <cookcafe@...> wrote:

Hi All,

 

Using Excel 2016, Windows 10 and the current version of JAWS.  I have an Excel sheet in column A I have the task a person must perform.  In Column B I will answer yes or no if they can perform the task.  Here is my issue, I want to create a formula at the bottom of column B to determine if they answered yes to 80% of the questions.  I would greatly appreciate your assistance!

 

Steve


Re: Excel Formula

 

I believe the best approach will be the CountIf function. You weren't specific as to whether you'll be filling out the spreadsheet and whether the number of questions will be consistent but let's assume you'll have a constant 20 questions and you'll be entering an uppercase Y for yes and an uppercase N for no. Let's also assume that you'll be entering these Y and Ns in cells B1 through B20. You could place the following formula in cell B21 to give you a count of the Y values:

 

=countif(B1:B20,"Y")

 

If desired, you could place another formula in cell B22 to divide the result in Cell b21 by 20 to calculate your percentage. You can be as creative as you like and could use an If function to test whether the division is 80% or greater and even incorporate everything into one formula but the larger the formula gets, the more difficult it is to resolve any problems.

 

Good luck.

 

Alan Lemly

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Steve & Shannon Cook
Sent: Tuesday, June 25, 2019 6:17 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Excel Formula

 

Hi All,

 

Using Excel 2016, Windows 10 and the current version of JAWS.  I have an Excel sheet in column A I have the task a person must perform.  In Column B I will answer yes or no if they can perform the task.  Here is my issue, I want to create a formula at the bottom of column B to determine if they answered yes to 80% of the questions.  I would greatly appreciate your assistance!

 

Steve

1661 - 1680 of 13767