Date   
Re: block quote.

Rebecca Lineberger
 

Could this be what you want?  I searched for

Verbosity

In the JAWS settings center, and found

Configure web verbosity.

There are three levels, high, medium and low.  For low, it says:

Choose Low to open the Low Virtual Cursor Verbosity Preferences dialog box. Use it to adjust settings for the Low Virtual Cursor verbosity level. Low verbosity will cause JAWS to speak as little structural information as possible about the elements on a page or inside a document. By default, only the start and end of tables and grids is announced at this level. Press SPACEBAR to open the dialog box.

HTH.

Rebecca

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Mike B.
Sent: Friday, August 10, 2018 3:17 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] block quote.

 

Hi Jim,

 

I know exactly what you're talking about, but I can't find the,

 

Block Quotes Identify Start And End not checked


checkbox anywhere in Jaws2018.  But, I do find it in the quick settings, Jaws key + V,  of IE11 with Jaws16.  I'll keep looking and let you know if I find it.

Take care.  Mike.  Go Dodgers!
Sennt from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

From: Jim Rawls

Sent: Friday, August 10, 2018 11:31 AM

Subject: [jaws-users] block quote.

 

Hi all, I have asked this question before and still don’t have an answer. I am running jaws 2018. Sometimes when I open an email or a document, jaws keeps saying, block quote block quote. In previous versions of jaws, I have been able to get jaws to quit saying that. I haven’t found a way to do it in  jaws 2018. I went to the settings center and typed in block quote and it said no results found. How can I get jaws to quit saying block quote? I am running windows ten along with jaws 2018. Jim

Re: Comments and tracking changes in office 2016 365

Nino Dagostino
 

Hi:

Make sure that comments is on when you are in word press the alt key and let up on it then type r and type td there a lot of items in this dialog box you will see a button for new you can also press (alt r c) to be able to put a comment in.

Don’t type the () I just used that so you would see what to type.

To list your comments in Jaws press ( control and shift ant the appostrafy) and you will be presented with a list of comments.

Hopefully this will get you going.

Deleteing comments was tricky for me.

I will send you another email I have to look back at my notes.

Have a good day.

-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Lev
Sent: Friday, August 10, 2018 8:34 AM
To: jaws-users-list@groups.io
Subject: [jaws-users] Comments and tracking changes in office 2016 365

Hi listers,

How do I read comments and track changes in office?

I'm using latest jaws 2018 and office 2016 365

thanks for any help.



--
Do me a favor and inspire me...
Literophilus

Re: block quote.

Mike B. <mike9902@...>
 

Hi Again Jim,
 
Okay, that Blocked Quote setting option changed in JAWS2018, and thank you Rebecca for giving me a kick in the right direction!
Try the following:
1. Open the Settings Center in either of these 2 ways.  Use this option for individual applications / programs.
A. Press, Insert / Jaws Key + 6, on the number row above the main keyboard.
B. Press, Insert / Jaws Key + F2, to open the, Jaws Manager, arrow down to,
Settings Center, & press enter.
With the Settings Center open press, control, shift , + D, to open the
Settings Center Default All Applications.  Use this option for making changes for all applications / programs.
3. Arrow down to, Web / HTML / PDFs closed, and right arrow to open.
4. Arrow down to, Reading, and right arrow to open.
4. Arrow down 1 time to, Web Verbosity Level, and the default setting is medium, so arrow down 1 more time to, Configure Web Verbosity Level closed, and right arrow to open.
5. Arrow down to, Medium...., and press the spacebar to open.  Do not press enter here, because if you press enter it will close the Settings Center.
6. Tab 1 time into a list of options and, Blocked Quotation, is the first checkbox, so press the spacebar to uncheck this option.
7. Tab to, Okay, press the spacebar, again tab to, Okay, and press enter to save your change and close the Settings Center.
Let us know if this got you fixed up.
HTH
Take care.  Mike.  Go Dodgers!
Sennt from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----
From: Jim Rawls
Sent: Friday, August 10, 2018 11:31 AM
Subject: [jaws-users] block quote.

Hi all, I have asked this question before and still don’t have an answer. I am running jaws 2018. Sometimes when I open an email or a document, jaws keeps saying, block quote block quote. In previous versions of jaws, I have been able to get jaws to quit saying that. I haven’t found a way to do it in  jaws 2018. I went to the settings center and typed in block quote and it said no results found. How can I get jaws to quit saying block quote? I am running windows ten along with jaws 2018. Jim

Can JAWS 2018 read images in emails?

 

Hi List,

 

I'm steadily climbing the ZoomText Fusion 2018 learning curve especially where JAWS is concerned. I'm loving its extremely powerful reading abilities especially when compared to the reading built into ZoomText Magnifier/Reader 10.1 which I've used the past few years. I know JAWS 2018 has some OCR capabilities built into it for scanned images and will read their text on the fly I believe. What I'm wondering is can it also do OCR conversion on the fly for images with text that are included in the body of an email? I do my email on my Windows 7 computer using Outlook 2010 and I'm noticing more and more emails from companies I do business with comprised almost entirely of images. It would be very handy if JAWS could read the text from those but I don't have a clue where to begin to do that.

 

If anyone can offer the hotkey keystrokes to do this, I'd very much appreciate it. Thanks in advance for any assistance.

 

Alan Lemly

Re: Function key option

Graham Smith
 

Thanks Steve

 

I am assuming jaws will not work in the bios, right?

 

At what point do I press F10 or escape? Whilst the laptop is booting up or after it has loaded?

 

Thanks for the clear instructions.

 

Graham

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Steve
Sent: 10 August 2018 19:44
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Function key option

 

 

You disable fn in the BIOS

 

To disable, or enable, the function key (fn) in the BIOS, do the following steps.

  1. Press the power button to turn on the computer.
  1. Press the f10 key to open the BIOS setup window. (On newer computers, you need to hold down the "esc" key. Then you can opt to go into the BIOS settings.)
  1. Use the right-arrow or left-arrow keys to navigate to the System Configuration option. Use the up-arrow or down-arrow keys to navigate to the Action Keys Mode option, and then press the "enter" key to display the Enable / Disable menu.
  1. Select the desired mode: Disable returns the function keys to their normal use, but you can still activate the HP shortcuts like turning wifi on and off by holding down the FN key together with the appropriate function key.
  1. Press f10 key to save the selection and restart the computer.

 

The function key (fn) option can be reset at any time by going back into the BIOS.

 

Take my advice, I don't use it anyway.

 

Steve
Lansing, MI

----- Original Message -----

From: Graham Smith

Sent: Friday, August 10, 2018 10:34 AM

Subject: [jaws-users] Function key option

 

Hi

 

I have just purchased an HP Pavillion laptop, can anyone remind me how to get the function keys to work without using them in conjunction with the function key.

 

Any help appreciated

 

Regards

 

Graham

 

regarding bouncing messages

David Ferrin
 

Here is a start for folks who are not receiving list traffic to un-bounce themselves. Note: you will most likely need a Groups IO account which is free of course. Also I will include this on the help page shortly as well.
 
1. Log-in at:
 
 
2. Navigate to, Link collapsed has pop-up, your display name, and press enter.
 
3. Find, link Accounts, and press enter.
 
4. Find, link Recent Bounces, and press enter.
 
5. Search for un-bounce your account or something to that effect and follow the directions at that point.

David Ferrin
A clear conscience is normally the result of a failing memory.

Re: regarding bouncing messages

james f hooper
 

Well I found the different message that they list and why they bounced but don’t find a link or buuton that says unbounce.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of David Ferrin
Sent: Friday, August 10, 2018 4:33 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] regarding bouncing messages

 

Here is a start for folks who are not receiving list traffic to un-bounce themselves. Note: you will most likely need a Groups IO account which is free of course. Also I will include this on the help page shortly as well.

 

1. Log-in at:

 

 

2. Navigate to, Link collapsed has pop-up, your display name, and press enter.

 

3. Find, link Accounts, and press enter.

 

4. Find, link Recent Bounces, and press enter.

 

5. Search for un-bounce your account or something to that effect and follow the directions at that point.


David Ferrin
A clear conscience is normally the result of a failing memory.

Re: regarding bouncing messages

David Ferrin
 

We are doing our best, the fact is none of us have bounced our accounts as of yet so we have no personal experience in this matter. We are going at least on that last part number 5 on the best guess type of action.
 

From: james f hooper
Sent: Friday, August 10, 2018 6:44 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] regarding bouncing messages
 

Well I found the different message that they list and why they bounced but don’t find a link or buuton that says unbounce.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of David Ferrin
Sent: Friday, August 10, 2018 4:33 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] regarding bouncing messages

 

Here is a start for folks who are not receiving list traffic to un-bounce themselves. Note: you will most likely need a Groups IO account which is free of course. Also I will include this on the help page shortly as well.

 

1. Log-in at:

 

 

2. Navigate to, Link collapsed has pop-up, your display name, and press enter.

 

3. Find, link Accounts, and press enter.

 

4. Find, link Recent Bounces, and press enter.

 

5. Search for un-bounce your account or something to that effect and follow the directions at that point.


David Ferrin
A clear conscience is normally the result of a failing memory.


David Ferrin
A clear conscience is normally the result of a failing memory.

Re: regarding bouncing messages

Alan Robbins
 

I get bounced periodically but simply click on the link in the Groups.IO email they send and all seems ok for days/weeks. In fact only about an hour ago it happened and this is the first message I  received after clicking on that link

 

Al

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of David Ferrin
Sent: Friday, August 10, 2018 6:51 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] regarding bouncing messages

 

We are doing our best, the fact is none of us have bounced our accounts as of yet so we have no personal experience in this matter. We are going at least on that last part number 5 on the best guess type of action.

 

From: james f hooper

Sent: Friday, August 10, 2018 6:44 PM

Subject: Re: [jaws-users] regarding bouncing messages

 

Well I found the different message that they list and why they bounced but don’t find a link or buuton that says unbounce.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of David Ferrin
Sent: Friday, August 10, 2018 4:33 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] regarding bouncing messages

 

Here is a start for folks who are not receiving list traffic to un-bounce themselves. Note: you will most likely need a Groups IO account which is free of course. Also I will include this on the help page shortly as well.

 

1. Log-in at:

 

 

2. Navigate to, Link collapsed has pop-up, your display name, and press enter.

 

3. Find, link Accounts, and press enter.

 

4. Find, link Recent Bounces, and press enter.

 

5. Search for un-bounce your account or something to that effect and follow the directions at that point.


David Ferrin
A clear conscience is normally the result of a failing memory.


David Ferrin
A clear conscience is normally the result of a failing memory.

Re: OCR software for scanner

Adrian Spratt
 

For anyone interested, I returned to IRTI’s Eclipse Writer for my OCR software. It is designed for visually impaired people, uses the ABBYY FineReader OCR scanning engine and cost $675. However, since I was upgrading from Version 5.0 to 5.5, I only had to pay $150, the same as FS’s upgrade fee for OpenBook. Note, however, the substantially lower price for the original purchase. I hadn’t expected to be charged the lower fee since I’d bought the original software several years ago for my old system, which is why I thought I might be in the market for an alternative.

 

Eclipse Writer can be tried out for a 30-day free trial. The link to the Pro version is https://store.irti.net/eclipsewriter-pro-with-scanning-ocr/

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of wayne smith
Sent: Friday, August 10, 2018 11:38 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] OCR software for scanner

 

I just called Freedom Scientific and spoke to Jeff in sales. He told me that the Openbook softtware was $900 and that it works with a flatbed scanner as long as it is twain compatible. For those who have previous versions of Openbook the upgrade is $150. You might want to recheck what they told you.

 

Wayne

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Adrian Spratt
Sent: Thursday, August 09, 2018 5:40 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] OCR software for scanner

 

Yes, the full price for the OpenBook software is $1,000. Also, the sales guy I spoke to said it works only with the Pearl camera, so add $300, especially annoying since I already have a scanner.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Alan Robbins via Groups.Io
Sent: Thursday, August 9, 2018 6:06 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] OCR software for scanner

 

Also, I see Open Book licenses for sale now and then on various lists. I would check eBay, Amazon, the BST list etc. before paying full price. A while back I saw a guy selling Open Book and a Pearl camera for $500

 

Al

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Timothy Appleby
Sent: Thursday, August 9, 2018 5:25 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] OCR software for scanner

 

Hi there, I would suggest Open Book, it’s a product by VFO Group. They would have recently updated that software to operate without any issues in Windows 10.

 

Contact their sales department about that product.

 

Timothy

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Adrian Spratt
Sent: Thursday, August 9, 2018 3:20 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] OCR software for scanner

 

Hi. My new Windows 10 machine won’t work with the current OCR software I use with my Hovercam scanner. I’m looking for recommendations for highly accurate OCR software for use with documents that also works well with JAWS. Obviously, it must also be Windows 10-compatible.

Re: Function key option

Steve
 

While it is booting up.
 
Yeah, unfortunately, you will probably need a working set of eyeballs.
 
 

----- Original Message -----
Sent: Friday, August 10, 2018 5:46 PM
Subject: Re: [jaws-users] Function key option

Thanks Steve

 

I am assuming jaws will not work in the bios, right?

 

At what point do I press F10 or escape? Whilst the laptop is booting up or after it has loaded?

 

Thanks for the clear instructions.

 

Graham

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Steve
Sent: 10 August 2018 19:44
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Function key option

 

 

You disable fn in the BIOS

 

To disable, or enable, the function key (fn) in the BIOS, do the following steps.

  1. Press the power button to turn on the computer.
  1. Press the f10 key to open the BIOS setup window. (On newer computers, you need to hold down the "esc" key. Then you can opt to go into the BIOS settings.)
  1. Use the right-arrow or left-arrow keys to navigate to the System Configuration option. Use the up-arrow or down-arrow keys to navigate to the Action Keys Mode option, and then press the "enter" key to display the Enable / Disable menu.
  1. Select the desired mode: Disable returns the function keys to their normal use, but you can still activate the HP shortcuts like turning wifi on and off by holding down the FN key together with the appropriate function key.
  1. Press f10 key to save the selection and restart the computer.

 

The function key (fn) option can be reset at any time by going back into the BIOS.

 

Take my advice, I don't use it anyway.

 

Steve
Lansing, MI

----- Original Message -----

From: Graham Smith

Sent: Friday, August 10, 2018 10:34 AM

Subject: [jaws-users] Function key option

 

Hi

 

I have just purchased an HP Pavillion laptop, can anyone remind me how to get the function keys to work without using them in conjunction with the function key.

 

Any help appreciated

 

Regards

 

Graham

 

Re: block quote.

Michael Massey
 

Hi.  Thank you very much Mike for providing the instructions so I could disable the blocked quote item. 

First Post to Jaws Users - Looking for Bible Search or Study program

tgilbert@...
 

Hello - This is my first post to the Jaws Users Group

 

Does anyone know any Bible Search or Study programs that work with JAWS?

 

Our pastor became blind in the last two years.  He finally has a computer provided to him which comes with JAWS

 

My limited understanding make me think that JAWS tries to “read” what is on the screen.

 

Apparently the Bible Programs that our pastor is familiar with,  do not produce a window which is readable by JAWS

 

I saw this forum and I am hoping someone will have some suggestions for our pastor

 

Thanks in advance

 

Tom Gilbert

tgilbert@...

830-832-1747

 

Re: regarding bouncing messages

Mike B. <mwb5781@...>
 


Hi David,
 
I just subscribed with a new email address to see if I can create any bounced messages.  Cross your fingers and let's see if we can get some hands on experience with this new subscription.
Take care, Mike.
Sent from my iBarstool.

----- Original Message -----
Sent: Friday, August 10, 2018 3:50 PM
Subject: Re: [jaws-users] regarding bouncing messages

We are doing our best, the fact is none of us have bounced our accounts as of yet so we have no personal experience in this matter. We are going at least on that last part number 5 on the best guess type of action.
 
From: james f hooper
Sent: Friday, August 10, 2018 6:44 PM
Subject: Re: [jaws-users] regarding bouncing messages
 

Well I found the different message that they list and why they bounced but don’t find a link or buuton that says unbounce.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of David Ferrin
Sent: Friday, August 10, 2018 4:33 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] regarding bouncing messages

 

Here is a start for folks who are not receiving list traffic to un-bounce themselves. Note: you will most likely need a Groups IO account which is free of course. Also I will include this on the help page shortly as well.

 

1. Log-in at:

 

 

2. Navigate to, Link collapsed has pop-up, your display name, and press enter.

 

3. Find, link Accounts, and press enter.

 

4. Find, link Recent Bounces, and press enter.

 

5. Search for un-bounce your account or something to that effect and follow the directions at that point.


David Ferrin
A clear conscience is normally the result of a failing memory.


David Ferrin
A clear conscience is normally the result of a failing memory.

Re: regarding bouncing messages

Mike B. <mwb5781@...>
 


Howdy Again Boss,
 
I forgot to add that I subscribed using the subscribe email address below, and haven't created a password on the Groups.io website, so hopefully I will start bouncing messages.
 
 
Take care, Mike.
Sent from my iBarstool.

----- Original Message -----
Sent: Friday, August 10, 2018 3:50 PM
Subject: Re: [jaws-users] regarding bouncing messages

We are doing our best, the fact is none of us have bounced our accounts as of yet so we have no personal experience in this matter. We are going at least on that last part number 5 on the best guess type of action.
 
From: james f hooper
Sent: Friday, August 10, 2018 6:44 PM
Subject: Re: [jaws-users] regarding bouncing messages
 

Well I found the different message that they list and why they bounced but don’t find a link or buuton that says unbounce.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of David Ferrin
Sent: Friday, August 10, 2018 4:33 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] regarding bouncing messages

 

Here is a start for folks who are not receiving list traffic to un-bounce themselves. Note: you will most likely need a Groups IO account which is free of course. Also I will include this on the help page shortly as well.

 

1. Log-in at:

 

 

2. Navigate to, Link collapsed has pop-up, your display name, and press enter.

 

3. Find, link Accounts, and press enter.

 

4. Find, link Recent Bounces, and press enter.

 

5. Search for un-bounce your account or something to that effect and follow the directions at that point.


David Ferrin
A clear conscience is normally the result of a failing memory.


David Ferrin
A clear conscience is normally the result of a failing memory.

Re: block quote.

Jim Rawls
 

Thanks mike. Very much appreciated. Go Dodgers, Jim

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Mike B.
Sent: Friday, August 10, 2018 1:40 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] block quote.

 

Hi Again Jim,

 

Okay, that Blocked Quote setting option changed in JAWS2018, and thank you Rebecca for giving me a kick in the right direction!

Try the following:
1. Open the Settings Center in either of these 2 ways.  Use this option for individual applications / programs.
A. Press, Insert / Jaws Key + 6, on the number row above the main keyboard.
B. Press, Insert / Jaws Key + F2, to open the, Jaws Manager, arrow down to,
Settings Center, & press enter.
With the Settings Center open press, control, shift , + D, to open the
Settings Center Default All Applications.  Use this option for making changes for all applications / programs.

3. Arrow down to, Web / HTML / PDFs closed, and right arrow to open.

4. Arrow down to, Reading, and right arrow to open.

4. Arrow down 1 time to, Web Verbosity Level, and the default setting is medium, so arrow down 1 more time to, Configure Web Verbosity Level closed, and right arrow to open.

5. Arrow down to, Medium...., and press the spacebar to open.  Do not press enter here, because if you press enter it will close the Settings Center.

6. Tab 1 time into a list of options and, Blocked Quotation, is the first checkbox, so press the spacebar to uncheck this option.

7. Tab to, Okay, press the spacebar, again tab to, Okay, and press enter to save your change and close the Settings Center.

Let us know if this got you fixed up.
HTH
Take care.  Mike.  Go Dodgers!
Sennt from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

From: Jim Rawls

Sent: Friday, August 10, 2018 11:31 AM

Subject: [jaws-users] block quote.

 

Hi all, I have asked this question before and still don’t have an answer. I am running jaws 2018. Sometimes when I open an email or a document, jaws keeps saying, block quote block quote. In previous versions of jaws, I have been able to get jaws to quit saying that. I haven’t found a way to do it in  jaws 2018. I went to the settings center and typed in block quote and it said no results found. How can I get jaws to quit saying block quote? I am running windows ten along with jaws 2018. Jim

Re: block quote.

Jim Rawls
 

Block quote is no more, thanks again. Jim

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Mike B.
Sent: Friday, August 10, 2018 1:40 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] block quote.

 

Hi Again Jim,

 

Okay, that Blocked Quote setting option changed in JAWS2018, and thank you Rebecca for giving me a kick in the right direction!

Try the following:
1. Open the Settings Center in either of these 2 ways.  Use this option for individual applications / programs.
A. Press, Insert / Jaws Key + 6, on the number row above the main keyboard.
B. Press, Insert / Jaws Key + F2, to open the, Jaws Manager, arrow down to,
Settings Center, & press enter.
With the Settings Center open press, control, shift , + D, to open the
Settings Center Default All Applications.  Use this option for making changes for all applications / programs.

3. Arrow down to, Web / HTML / PDFs closed, and right arrow to open.

4. Arrow down to, Reading, and right arrow to open.

4. Arrow down 1 time to, Web Verbosity Level, and the default setting is medium, so arrow down 1 more time to, Configure Web Verbosity Level closed, and right arrow to open.

5. Arrow down to, Medium...., and press the spacebar to open.  Do not press enter here, because if you press enter it will close the Settings Center.

6. Tab 1 time into a list of options and, Blocked Quotation, is the first checkbox, so press the spacebar to uncheck this option.

7. Tab to, Okay, press the spacebar, again tab to, Okay, and press enter to save your change and close the Settings Center.

Let us know if this got you fixed up.
HTH
Take care.  Mike.  Go Dodgers!
Sennt from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

From: Jim Rawls

Sent: Friday, August 10, 2018 11:31 AM

Subject: [jaws-users] block quote.

 

Hi all, I have asked this question before and still don’t have an answer. I am running jaws 2018. Sometimes when I open an email or a document, jaws keeps saying, block quote block quote. In previous versions of jaws, I have been able to get jaws to quit saying that. I haven’t found a way to do it in  jaws 2018. I went to the settings center and typed in block quote and it said no results found. How can I get jaws to quit saying block quote? I am running windows ten along with jaws 2018. Jim

Re: Comments and tracking changes in office 2016 365

Lev
 

Hi there Nino,

thank you for replyiing to my question, yes I would highly appreciate if you go further with all the info you can.

thanks again.


Do me a favor and inspire me...
Literophilus

El 10/08/2018 a las 13:51, Nino Dagostino escribió:
Hi:

Make sure that comments is on when you are in word press the alt key and let up on it then type r and type td there a lot of items in this dialog box you will see a button for new you can also press (alt r c) to be able to put a comment in.

Don’t type the () I just used that so you would see what to type.

To list your comments in Jaws press ( control and shift ant the appostrafy) and you will be presented with a list of comments.

Hopefully this will get you going.

Deleteing comments was tricky for me.

I will send you another email I have to look back at my notes.

Have a good day.



-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Lev
Sent: Friday, August 10, 2018 8:34 AM
To: jaws-users-list@groups.io
Subject: [jaws-users] Comments and tracking changes in office 2016 365

Hi listers,

How do I read comments and track changes in office?

I'm using latest jaws 2018 and office 2016 365

thanks for any help.


Re: First Post to Jaws Users - Looking for Bible Search orStudy program

David Moore
 

Welcome to the list!

Great to have you.

I use Bible gateway, because it is very accessible, you can type words, books, a verse, and so on, in the search box.

You can press H for headings, and read it with your screen reader. Also, in the NIV, for example, has a link where you can listen to someone read it.

So, you have both ways to listen to the NIV, with JAWS, or listen to a person read it.

There is a combo box where you can choose from many English versions, and many languages.

I love Bible Gateway.

Here is the URL:

www.biblegateway.com

Please message me for more questions!

David Moore

 

Sent from Mail for Windows 10

 

From: Tom Gilbert
Sent: Friday, August 10, 2018 7:34 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] First Post to Jaws Users - Looking for Bible Search orStudy program

 

Hello - This is my first post to the Jaws Users Group

 

Does anyone know any Bible Search or Study programs that work with JAWS?

 

Our pastor became blind in the last two years.  He finally has a computer provided to him which comes with JAWS

 

My limited understanding make me think that JAWS tries to “read” what is on the screen.

 

Apparently the Bible Programs that our pastor is familiar with,  do not produce a window which is readable by JAWS

 

I saw this forum and I am hoping someone will have some suggestions for our pastor

 

Thanks in advance

 

Tom Gilbert

tgilbert@...

830-832-1747

 

 

Re: regarding bouncing messages

David Ferrin
 

I was wondering why you joined up with another address, so now I know.
 

From: Mike B.
Sent: Friday, August 10, 2018 7:37 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] regarding bouncing messages
 
Hi David,
 
I just subscribed with a new email address to see if I can create any bounced messages.  Cross your fingers and let's see if we can get some hands on experience with this new subscription.
Take care, Mike.
Sent from my iBarstool.
----- Original Message -----
From: David Ferrin
To: jaws-users-list@groups.io
Sent: Friday, August 10, 2018 3:50 PM
Subject: Re: [jaws-users] regarding bouncing messages
 
We are doing our best, the fact is none of us have bounced our accounts as of yet so we have no personal experience in this matter. We are going at least on that last part number 5 on the best guess type of action.
 
From: james f hooper
Sent: Friday, August 10, 2018 6:44 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] regarding bouncing messages
 

Well I found the different message that they list and why they bounced but don’t find a link or buuton that says unbounce.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of David Ferrin
Sent: Friday, August 10, 2018 4:33 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] regarding bouncing messages

 

Here is a start for folks who are not receiving list traffic to un-bounce themselves. Note: you will most likely need a Groups IO account which is free of course. Also I will include this on the help page shortly as well.

 

1. Log-in at:

 

 

2. Navigate to, Link collapsed has pop-up, your display name, and press enter.

 

3. Find, link Accounts, and press enter.

 

4. Find, link Recent Bounces, and press enter.

 

5. Search for un-bounce your account or something to that effect and follow the directions at that point.


David Ferrin
A clear conscience is normally the result of a failing memory.


David Ferrin
A clear conscience is normally the result of a failing memory.

David Ferrin
A clear conscience is normally the result of a failing memory.