|
Re: Cursor Location In Word
Adrian Spratt
Glenn, A two-part answer, the first of which I know is true. Press alt-delete to determine how many inches you’re in from the left edge. That’s assuming you have MS word to measure in inches. Here’s where I think I’m right, but I haven’t Googled to confirm. I believe ten spaces equals one inch. If both parts are true, four inches from the left would give you your forty spaces.
From: jaws-users-list@groups.io <jaws-users-list@groups.io>
On Behalf Of Glenn / Lenny
Sent: Monday, November 12, 2018 10:39 PM To: jaws-users-list@groups.io Subject: [jaws-users] Cursor Location In Word
Hi, Using Jaws 2018, and MS Word 2000. But I think the command would be the same regardless of Word version. I need a way to read where I am in a document so I can tell if three lines are all approximately 40 spaces in from the left edge. Thanks
|
|||||
|
|
|||||
|
Cursor Location In Word
Glenn / Lenny
Hi,
Using Jaws 2018, and MS Word 2000.
But I think the command would be the same
regardless of Word version.
I need a way to read where I am in a document so I
can tell if three lines are all approximately 40 spaces in from the left
edge.
Thanks
Sent From My Tabletop Sent From My Tabletop
|
|||||
|
|
|||||
|
Cursor Location In Word
Glenn / Lenny
Hi,
Using Jaws 2018, and MS Word 2000.
But I think the command would be the same
regardless of Word version.
I need a way to read where I am in a document so I
can tell if three lines are all approximately 40 spaces in from the left
edge.
Thanks
Sent From My Tabletop
|
|||||
|
|
|||||
|
Re: research it
Dave... <dgcarlson@...>
I'm okay with Amazon, but are there others who would
prefer that ResearchIt allow the user to decide which browser it uses? Currently
IE is hard-coded and we can't change it. If you agree, send a note to suggestions@... and voice your
wishes.
Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
----- Original Message -----
From: Holger Fiallo
Sent: Monday, November 12, 2018 15:17
Subject: [jaws-users] research it Hi, all I am not
able to use amazon in research it. Using jaws 2019 and current w10. Is anyone
having problem using amazon on it? Holger Fiallo
|
|||||
|
|
|||||
|
research it
Holger Fiallo <hfiallo@...>
Hi, all I am not
able to use amazon in research it. Using jaws 2019 and current w10. Is anyone
having problem using amazon on it? Holger Fiallo
|
|||||
|
|
|||||
|
Re: turning of table header info temporarily or permanently
Stephen Bennett <sbennett5252@...>
Hi Robin
For the announcing of column and row numbers, look in quick settings for Cell coordinates Announcement For column and row titles, The setting you want is in Quick Settings and it's called "Override Bookmark Headers". Once you turn this on the other options become available below it. You can adjust this for either all files or the current file.
hope this helps.
SB
From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Saturday, November 10, 2018 5:17 AM To: jaws-users-list@groups.io Subject: [jaws-users] turning of table header info temporarily or permanently
When I am editing tables in Word, I am often more confused by the way JAWS reads the row and column label information by default. What setting do I need to turn this off so JAWS only reads cell contents? I just looked in Quick Settings and the three available options for tables did not seem appropriate.
Robin Van Lant, Sr. Program Manager Key Equipment Finance | 720-304-1060
|
|||||
|
|
|||||
|
Re: Google Docs and Sheets
wayne smith
That might be something that would help several of us so can you please consider sharing?
Wayne
From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of chris judge
Sent: Monday, November 12, 2018 12:36 PM To: jaws-users-list@groups.io Subject: Re: [jaws-users] Google Docs and Sheets
Hi Joe. If you email me off list I can send you a link to a tutorial that might interest you.
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Joe DiNero
Hi Everybody,
Hope everyone is doing well today. A couple of years back Freedom did a webinar on google docs and sheets. Are there any more updated tutorials that cover Google docs and Sheets that are out there either via audio or text based as JAWS works a lot better with them today. Any help would be greatly appreciated.
Joe
|
|||||
|
|
|||||
|
Re: Google Docs and Sheets
chris judge
Hi Joe. If you email me off list I can send you a link to a tutorial that might interest you.
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Joe DiNero
Sent: November 11, 2018 10:18 AM To: jaws-users-list@groups.io Subject: [jaws-users] Google Docs and Sheets
Hi Everybody,
Hope everyone is doing well today. A couple of years back Freedom did a webinar on google docs and sheets. Are there any more updated tutorials that cover Google docs and Sheets that are out there either via audio or text based as JAWS works a lot better with them today. Any help would be greatly appreciated.
Joe
|
|||||
|
|
|||||
|
Re: Start up problem with J 19
Mike B. <mike9902@...>
toggle quoted messageShow quoted text
Hi Matthew,
It is not, shell:start,
it is, shell:startup
Take care. Mike. Go Rams! Sent from my iBarstool. Arguing with a woman is like reading a software license agreement. In the end you have to ignore everything, & click I agree.
----- Original Message -----
From: matthew dyer
Sent: Monday, November 12, 2018 9:05 AM
Subject: Re: [jaws-users] Start up problem with J 19 Matthew > On Nov 11, 2018, at 3:59 PM, Mike Rogers <harpman9@...> wrote: > > I believe so. Jaws wouldn't start until i used the hot key. But it's fixed now, after following adrians suggestion. > > ******************************** > > https://nam01.safelinks.protection.outlook.com/?url=www.harmonicaworkshops.com&data=02%7C01%7C%7C44ca5b137a954227f96508d648188857%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636775667527639826&sdata=zkfk2CbfizVpQKLhRuq%2BYBdIqtL4b5ksQFeDJ9teWpQ%3D&reserved=0 > > > > On Sun, 11 Nov 2018 19:30:13 +0000 > "matthew dyer" <ilovecountrymusic483@...> wrote: > >> Are you talking about on the login screen? I have this problem on my hp notebook. Once I am in and on my desktop jaws loads as it should. >> >> Matthew >> >> >> >>> On Nov 11, 2018, at 8:21 AM, Mike Rogers <harpman9@...> wrote: >>> >>> Jaws is checked to start at log in, but doesn't always happen. Never had this problem with earlier versions. I have to use the hot key to start. Not a huge problem, but annoying. >>> >>> ******************************** >>> >>> https://nam01.safelinks.protection.outlook.com/?url=www.harmonicaworkshops.com&data=02%7C01%7C%7C44ca5b137a954227f96508d648188857%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636775667527639826&sdata=zkfk2CbfizVpQKLhRuq%2BYBdIqtL4b5ksQFeDJ9teWpQ%3D&reserved=0 >>> >>> >>> >>> >>> >>> >> >> >> > > > >
|
|||||
|
|
|||||
|
Re: Start up problem with J 19
Adrian Spratt
A threshold question: did you type shell:startup without any spaces?
toggle quoted messageShow quoted text
-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of matthew dyer Sent: Monday, November 12, 2018 12:06 PM To: jaws-users-list@groups.io Subject: Re: [jaws-users] Start up problem with J 19 When you say it wouldn’t start do you mean at the login screen? I tried the steps as provided and it said could not find Shell:start any ideas? Matthew On Nov 11, 2018, at 3:59 PM, Mike Rogers <harpman9@...> wrote:
|
|||||
|
|
|||||
|
Re: OCR and Facebook
Danny Park
The image is imbedded in a field and does not show as an image but rather
just does not read.
Danny
From: Danny
Park
Sent: Friday, November 09, 2018 11:31 AM
To: jaws-users-list@groups.io
Subject: [jaws-users] OCR and Facebook I was wondering if anyone has been successful in reading images on Facebook
using ocr in JAWS.
Thanks,
Danny
|
|||||
|
|
|||||
|
Re: Start up problem with J 19
matthew dyer <ilovecountrymusic483@...>
When you say it wouldn’t start do you mean at the login screen? I tried the steps as provided and it said could not find Shell:start any ideas?
toggle quoted messageShow quoted text
Matthew
On Nov 11, 2018, at 3:59 PM, Mike Rogers <harpman9@...> wrote:
|
|||||
|
|
|||||
|
Re: Start up problem with J 19
Mike Rogers
thanks Mike.
******************************** www.harmonicaworkshops.com On Sun, 11 Nov 2018 18:05:28 -0800 "Mike B." <mike9902@...> wrote: Hi Adrian & Mike,
|
|||||
|
|
|||||
|
Re: Problems with jaws 2018 and jaws 2019
Marek Durila
Hi,
"Fred Adams" ---10.11.2018 10:36:39---I am using W 10 and jaws 18 at present time. I have From: "Fred Adams" <hamshack@...> To: "jaws-users IO" <jaws-users-list@groups.io> Date: 10.11.2018 10:36 Subject: [jaws-users] Problems with jaws 2018 and jaws 2019 Sent by: jaws-users-list@groups.io I am using W 10 and jaws 18 at present time. I have installed both jaws 2018 and jaws 2019 several times did jaws repair and system restore but no success. When I install jaws 2018 and jaws 2019 both acts the same. I have very little control in navigating. I can not bring up the JSC settings, system settings or applications settings and more. I can bring up windows settings but can not check or uncheck anything. Any place there are check marks I can not tell if they are checked or unchecked. Everytime I have installed jaws, it has been from the freedomscientific website. If anyone has any suggestions on this I will greatly appreciate it. Jaws 17 and jaws 18 both work just fine. Does anyone know if the Microsoft handicap help is taking calls on the weekend? Thanks much, FRED C. ADAMS W4HC US ARMY ABN RETIRED ETERNITY A VERY LONG LONG TIME
|
|||||
|
|
|||||
|
Re: Start up problem with J 19
Adrian Spratt
Thanks, Mike.
From: jaws-users-list@groups.io <jaws-users-list@groups.io>
On Behalf Of Mike B.
Sent: Sunday, November 11, 2018 9:05 PM To: jaws-users-list@groups.io Subject: Re: [jaws-users] Start up problem with J 19
Hi Adrian & Mike,
In case you're wondering, below is the file path where the, Shell:startup, folder is located.
These programs start up for the current logged in user only. To directly access this folder, open Run, type shell:startup and hit Enter. Take care. Mike. Go Rams! ----- Original Message ----- From: Adrian Spratt Sent: Sunday, November 11, 2018 7:06 AM Subject: Re: [jaws-users] Start up problem with J 19
Mike,
|
|||||
|
|
|||||
|
Re: Google Docs and Sheets
Roger Newell
The American Foundation for the Blind made some tutorials about using
toggle quoted messageShow quoted text
G Suite with NVDA.
On 11/12/18, Joe DiNero <joedinero68@...> wrote:
Hi Everybody,
|
|||||
|
|
|||||
|
Re: Start up problem with J 19
Mike B. <mike9902@...>
Hi Adrian & Mike,
In case you're wondering, below is the file path
where the, Shell:startup, folder is located.
C:\Users\Username\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup These programs start up for the current logged in user only. To directly
access this folder, open Run, type shell:startup and hit Enter.
Take care. Mike. Go Rams! Sent from my iBarstool. Arguing with a woman is like reading a software license agreement. In the end you have to ignore everything, & click I agree.
----- Original Message -----
From: Adrian
Spratt
Sent: Sunday, November 11, 2018 7:06 AM
Subject: Re: [jaws-users] Start up problem with J 19 I've reported this same JAWS 2019 problem to Vispero. You might consider doing the same. Meanwhile, they gave me a workaround, as follows: Copy the JAWS desktop 2019 icon/shortcut by placing focus on it and pressing control-c. Open the run dialog with Windows-r. Type: Shell:startup Press enter Press control-v to paste the JAWS 2019 shortcut. Close the run dialog with alt-F4. this has worked on my system. -----Original Message----- From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Mike Rogers Sent: Sunday, November 11, 2018 8:21 AM To: Jaws Users List <jaws-users-list@groups.io> Subject: [jaws-users] Start up problem with J 19 Jaws is checked to start at log in, but doesn't always happen. Never had this problem with earlier versions. I have to use the hot key to start. Not a huge problem, but annoying. ******************************** www.harmonicaworkshops.com
|
|||||
|
|
|||||
|
Re: Start up problem with J 19
Mike Rogers
I believe so. Jaws wouldn't start until i used the hot key. But it's fixed now, after following adrians suggestion.
******************************** www.harmonicaworkshops.com On Sun, 11 Nov 2018 19:30:13 +0000 "matthew dyer" <ilovecountrymusic483@...> wrote: Are you talking about on the login screen? I have this problem on my hp notebook. Once I am in and on my desktop jaws loads as it should.
|
|||||
|
|
|||||
|
Re: Start up problem with J 19
Mike Rogers
mine is the same way.
******************************** www.harmonicaworkshops.com On Sun, 11 Nov 2018 19:06:12 +0000 "Adrian Spratt" <adrian@...> wrote: I'm glad. I don't know about your system, but an additional nice part on mine is that the moment JAWS comes up, I can start working. Before, I've had to wait a while to get started, and I could only guess how long.
|
|||||
|
|
|||||
|
Re: Start up problem with J 19
matthew dyer <ilovecountrymusic483@...>
Are you talking about on the login screen? I have this problem on my hp notebook. Once I am in and on my desktop jaws loads as it should.
toggle quoted messageShow quoted text
Matthew
On Nov 11, 2018, at 8:21 AM, Mike Rogers <harpman9@...> wrote:
|
|||||
|
|
|||||