Date   

how to change jaws voice parameters on the fly

Mike Bernard
 

Hi everyone,

Hope everyones’ having a good week thus far. I already know that in order to adjust the rate in Jaws on the fly, the command is control plus ault plus either page up or page down, to make the voice speak slower or faster. However, I can’t remember how to change the pitch and/or volume on the fly, without having to have to go into the options dialog all the time. Are there commands for doing this? Thanks.

Mike

 

Do you like disco? Do you like to shake your groove with New Wave, 90s Hiphop, Or today’s slammin hits? If so, check out my show every Wednesday night from 7 to 9 pm Eastern on ACB Radio Interactive at

www.acbradio.org/interactive

 

 


Re: JAWS and Microsoft account

Van Lant, Robin
 

I use an iPhone app called Authenticate that works in conjunction with my VPN login for work.  The app says it’s from Dell though, so I’m not sure it’s the same.  I log into the Cisco AnyConnect VPN on my laptop, then I get an edit box to enter the token code that is sent to my phone’s Authenticate app. Is that the kind of thing you are going to be doing? 

 

 

 

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Holger Fiallo
Sent: Saturday, July 13, 2019 7:11 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] JAWS and microsoft account

 

OK. I am not sure if this is a jaws question. If not sorry. Please do not jump all over me. I just was ask to get Microsoft authenticate. Can this be done in the PC or I need to get the app for iPhone? I did so and does not seen to work for me.   

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Re: How to open online PDF files in Acrobat Reader DC?

Larry Gassman <larrygassman@...>
 

Sounds fine.
This gives me a chance to breathe and then get something to eat after I finish with TekTalk.
Larry

At 01:47 PM 7/15/2019, Adrian Spratt wrote:
It used to be that you could find this option in Acrobat's accessibility, in the last of the five-step dialog, but it's gone. Where has it gone to?


Re: How to open online PDF files in Acrobat Reader DC?

Larry Gassman <larrygassman@...>
 

Sounds fine.
This gives me a chance to breathe and then get something to eat after I finish with TekTalk.
Larry

At 01:47 PM 7/15/2019, Adrian Spratt wrote:
It used to be that you could find this option in Acrobat's accessibility, in the last of the five-step dialog, but it's gone. Where has it gone to?


How to open online PDF files in Acrobat Reader DC?

Adrian Spratt
 

It used to be that you could find this option in Acrobat’s accessibility, in the last of the five-step dialog, but it’s gone. Where has it gone to?


Re: How do I check a JAWS script version?

Van Lant, Robin
 

Thanks, John. That produced a different number than the name on the executable file. I think I'll provide both to the person who asked me which version I am using.

-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of John Gassman
Sent: Monday, July 15, 2019 10:48 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] How do I check a JAWS script version?

usually if you are inside the application, JAWS key plus q tells you what script version you have.
I don't know if this is universal or if it depends on the individual who wrote the scripts.

That is the way it works with scripts I have written by Jim Snowbarger for Sound Forge and Brian Hartgen for numerous script applications.
JohnAt 09:40 AM 7/15/2019, you wrote:
P.S. I unzipped the file I had and that executable file name has more
numbers it it that I assume indicate version. But, I still wonder if
there is a way I can tell the version from within JAWS, in case I
didn't have the original file.



From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf
Of Van Lant, Robin via Groups.Io
Sent: Monday, July 15, 2019 10:34 AM
To: jaws-users-list@groups.io
Subject: [jaws-users] How do I check a JAWS script version?

I'm doing some troubleshooting with someone on Cisco software I'm using
at work. He's asking what version of the Cisco scripts I am using. How
do I check this? The .zip file I originally downloaded doesn't' have a
version number in the file name. If I launch the scripts manager from
JAWS, I get the following, which I don't know how to interpret.


use "default.jsb"
use "j4w_default.jsb" ; 5

void function filler()
; Filler to make some JAWS versions compile this file successfully.
return
endFunction


I'm using JAWS 2019 May release with Windows 10.









Robin Van Lant, Sr. Program Manager, Strategy & Performance Management
Key Equipment Finance | 720-304-1060
| <http://www.keyequipmentfinance.com/>www.keyequipmentfinance.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If
you are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information.
If you received this communication in error, please contact the
sender immediately and destroy the material in its entirety, whether
electronic or hard copy. This communication may contain nonpublic
personal information about consumers subject to the restrictions of
the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse
or redisclose such information for any purpose other than to provide
the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the SUBJECT line.

JAWS Certified, 2014.
http://www.FreedomScientific.com/Certification







This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the
SUBJECT line.


Re: How do I check a JAWS script version?

John Gassman <johngassman@...>
 

usually if you are inside the application, JAWS key plus q tells you what script version you have.
I don't know if this is universal or if it depends on the individual who wrote the scripts.

That is the way it works with scripts I have written by Jim Snowbarger for Sound Forge and Brian Hartgen for numerous script applications.
JohnAt 09:40 AM 7/15/2019, you wrote:
P.S. I unzipped the file I had and that executable file name has more numbers it it that I assume indicate version. But, I still wonder if there is a way I can tell the version from within JAWS, in case I didn't have the original file.



From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Monday, July 15, 2019 10:34 AM
To: jaws-users-list@groups.io
Subject: [jaws-users] How do I check a JAWS script version?

I'm doing some troubleshooting with someone on Cisco software I'm using at work. He's asking what version of the Cisco scripts I am using. How do I check this? The .zip file I originally downloaded doesn't' have a version number in the file name. If I launch the scripts manager from JAWS, I get the following, which I don't know how to interpret.


use "default.jsb"
use "j4w_default.jsb" ; 5

void function filler()
; Filler to make some JAWS versions compile this file successfully.
return
endFunction


I'm using JAWS 2019 May release with Windows 10.









Robin Van Lant, Sr. Program Manager, Strategy & Performance Management
Key Equipment Finance | 720-304-1060 | <http://www.keyequipmentfinance.com/>www.keyequipmentfinance.com



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.

JAWS Certified, 2014.
http://www.FreedomScientific.com/Certification


Re: How do I check a JAWS script version?

Van Lant, Robin
 

P.S.  I unzipped the file I had and that executable file name has more numbers it it that I assume indicate version.  But, I still wonder if there is a way I can tell the version from within JAWS, in case I didn’t have the original file. 

 

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Monday, July 15, 2019 10:34 AM
To: jaws-users-list@groups.io
Subject: [jaws-users] How do I check a JAWS script version?

 

I’m doing some troubleshooting with someone on Cisco software I’m using at work. He’s asking what version of the Cisco scripts I am using.  How do I check this?  The .zip file I originally downloaded doesn’t’ have a version number in the file name.  If I launch the scripts manager from JAWS, I get the following, which I don’t know how to interpret. 

 

 

use "default.jsb"

use "j4w_default.jsb"  ; 5

 

void function filler()

; Filler to make some JAWS versions compile this file successfully.

return

endFunction

 

 

I’m using JAWS 2019 May release with Windows 10.

 

 

 

 

 

 

 

 

 

Robin Van Lant, Sr. Program Manager, Strategy & Performance Management

Key Equipment Finance | 720-304-1060 |  www.keyequipmentfinance.com 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


How do I check a JAWS script version?

Van Lant, Robin
 

I’m doing some troubleshooting with someone on Cisco software I’m using at work. He’s asking what version of the Cisco scripts I am using.  How do I check this?  The .zip file I originally downloaded doesn’t’ have a version number in the file name.  If I launch the scripts manager from JAWS, I get the following, which I don’t know how to interpret. 

 

 

use "default.jsb"

use "j4w_default.jsb"  ; 5

 

void function filler()

; Filler to make some JAWS versions compile this file successfully.

return

endFunction

 

 

I’m using JAWS 2019 May release with Windows 10.

 

 

 

 

 

 

 

 

 

Robin Van Lant, Sr. Program Manager, Strategy & Performance Management

Key Equipment Finance | 720-304-1060 |  www.keyequipmentfinance.com 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Re: WLM Filters

Marie <magpie.mn@...>
 

Yes, that is strange indeed. Unchecking that box should work so not sure why it does not.
 
 

From: Ron Kolesar
Sent: Sunday, July 14, 2019 9:24 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hi Marie, from Ron Kolesar
1. I already have the send signatures with all outgoing mail checked.
2. I also have the don’t send signatures with forward and or returned unchecked.
Which if you tab over only once from option one to option two you see both of the above options.
So with the two above options set correctly, I can ship the signature out with outgoing mail if I write a letter, but if I ctrl R to return to sender or fw to forward a letter, I don’t get the signature and I have everything set up correctly.
So, that’s the weird thing.
Many thanks for the help and the support.
Ron
 
From: Marie
Sent: Monday, July 15, 2019 00:00
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron, to fix your issue with the tag line:
Press alt+f to go to the file menu.
Arrow down to Options
press the right arrow to go to the mail options.
press tab+ctrl until you get to the Signatures tab.
The first thing is a check box to include the signature on all outgoing messages. If you check this box, the next line will be Open-mouthed smiledon't add signature to replies. You need to uncheck  this box, which is checked by default.
tab down to the  OK button and press enter.
After this, the signature or tag line as you call it should appear on replies as well as new messages.
Marie
 
 
From: Ron Kolesar
Sent: Sunday, July 14, 2019 5:51 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hey Glen.
I simply forward the message that you sent to me via the list to your friend.
So, if I hear of anything I’ll ship it to you.
The only problem I have is that at random I get to copies of the address when I’m shipping out a letter while using jaws and WLM.
The first copy of the address is fine, then with no spaces I have a second copy of the letter enclosed in greater than and less than symbols without a space in between.
Then I have to move the entire line to the cc field to clean up the address then cut it and throw it in the to field before I can ship it out.
Then the other problem I’m having is if I write a letter my tag line goes with it.
But If I return to sender or forward a letter I have to manually type in my tagline.
So your letter went out.
Ron
 
From: Glenn / Lenny
Sent: Sunday, July 14, 2019 18:59
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hi Ron,
I have a weird eMail thing going on, and I'm wondering if a friend's Comcast server is rejecting messages from a WLM client.
Can you send a message to a friend's address and see if he gets it?
If you copy this message from me he will understand, as I've been working with him and Comcast on the phone today, and this is a hypothesis I just came up with.
If he gets a message from you, using WLM, then we'll know that it isn't because Comcast is rejecting WLM messages.
His address is:
josephmachise@...
Thanks.
Glenn

From: Ron Kolesar
Sent: Thursday, June 06, 2019 7:30 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
yes, I do notice that once in a blue moon that a few will go into the inbox instead of where they’re suppose to go into.
I usually double check  the rule AKA filter and go down into the rules and click on modify and double check that everything is set correctly.
But you can’t help that a few will go astray.
Enjoy the rules filter feature and the sub mailbox feature in WLM.
Every time I need to talk to a MS disability operator, while we’re linked together, I’ll recommend those two features and why I know quite of few blind people are using the MS mail app, why I’m staying with WLM and keep asking if they’ll install the two above features into the mail app.
Unless something seriously  happens to WLM or if they finely get all of the bugs out of the mail app, I’m staying with WLM.
Enjoy.
Ron
 
From: Glenn / Lenny
Sent: Wednesday, June 5, 2019 14:05
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron,
Have you ever noticed inconsistencies in the mail filters in WLM?
I have one that filters anything sent to audiotrax into my media folder.
99% of the time it works, but once in a while one slips through into my inbox.
I had the same filters, made just the same in outlook express, and they always worked as expected.
Glenn
 
 
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
That’s a little tricky to do over the phone, and the sound effect would be for all mail not just for the inbox.
Sorry that I can’t be more help.
Ron
 
From: patti
Sent: Wednesday, June 5, 2019 10:03
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 

Hi, I got the rule made, but I want to put a different sound from the inbox sound.

How do I do that?

I’m running windows 10, jaws 18, outlook, and office 2010.

Thanks for any help.

Patti

 

Hi

Marie.

Its really a walk in the park with windows 10 for creating message rules with WLM.

Let Glen and or myself know if you would need help and we’ll do our best to help you out.

Ron Ham Radio Station KR3DOG-PA-WCECTM

 

 

 

From: Marie

Sent: Tuesday, June 4, 2019 11:04

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glad you found this solution because I may have occasion to want to do the same kind of filter. I believe I did have one, once, long ago but had certainly forgotten how to make it work.Thanks for sharing.

Marie

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 9:52 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Ron and All,

Just thought I'd let the list know that I figured out a work-around for the message body not having an edit field in the filter.

I tried not checking the from option, and only selecting the message body and the move to a folder options, and when there was only one option, I got an edit field to put in my criteria.

Then I saved that part, and then I shift tabbed up and added the from option and did that part, and then the rest of the filter worked as usual.

I don't know why that would matter, but this way worked.

 

Glenn

 

From: Ron Kolesar

Sent: Monday, June 03, 2019 2:28 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glen, are you talking about the third roll over in the four rolls?

What I normally do is this.

after doing a alt n for new rule, the first roll I go down to to and cc, but you could get away with just to.

That’s a personal preference.

Tab once to the second roll and you should see move to the specified folder and it should be checked.

The third is probably where you’re having problems.

    I usually skip this one and fill in the name I want the rule to be named first which is the four roll then back tab to the third.

Smack enter on it and you should see a field to inter in the address.

Then if you smack enter twice, you then should see move it to the folder you want to move it to.

Hope this helps.

Ron KR3DOG-PA-WCECTM

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 14:13

To: jaws-users-list@groups.io

Subject: [jaws-users] WLM Filters

 

Hi,

I'm having difficulty creating a filter in Windows Live Mail.

I have several that I have made, so I normally have no problem creating filters.

The criteria that does not seem to be working is

"where the message body contains"

The only two things that are available when I go into it to type in the filter is exact match or any of the criteria.

But there should be an edit field to type in something for it to filter.

There is only those two options, and neither givbes me an edit field.

I've used my Jaws cursor, to look for something to click on, and there is nothing that I can find to click on.  latest Jaws, and this is Windows 7-64.

I have done this before in OE and it allows me to put in some criteria.

Something else strange I noticed, it reads "checked" when it shows other filters and also in some of the options.

If anyone here is using WLM and has figured this one out, I'll write a Thanks in advance for any thoughts.

Glenn

 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG


Re: WLM Filters

Ron Kolesar
 

Hi Marie, from Ron Kolesar
1. I already have the send signatures with all outgoing mail checked.
2. I also have the don’t send signatures with forward and or returned unchecked.
Which if you tab over only once from option one to option two you see both of the above options.
So with the two above options set correctly, I can ship the signature out with outgoing mail if I write a letter, but if I ctrl R to return to sender or fw to forward a letter, I don’t get the signature and I have everything set up correctly.
So, that’s the weird thing.
Many thanks for the help and the support.
Ron
 

From: Marie
Sent: Monday, July 15, 2019 00:00
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron, to fix your issue with the tag line:
Press alt+f to go to the file menu.
Arrow down to Options
press the right arrow to go to the mail options.
press tab+ctrl until you get to the Signatures tab.
The first thing is a check box to include the signature on all outgoing messages. If you check this box, the next line will be Open-mouthed smiledon't add signature to replies. You need to uncheck  this box, which is checked by default.
tab down to the  OK button and press enter.
After this, the signature or tag line as you call it should appear on replies as well as new messages.
Marie
 
 
From: Ron Kolesar
Sent: Sunday, July 14, 2019 5:51 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hey Glen.
I simply forward the message that you sent to me via the list to your friend.
So, if I hear of anything I’ll ship it to you.
The only problem I have is that at random I get to copies of the address when I’m shipping out a letter while using jaws and WLM.
The first copy of the address is fine, then with no spaces I have a second copy of the letter enclosed in greater than and less than symbols without a space in between.
Then I have to move the entire line to the cc field to clean up the address then cut it and throw it in the to field before I can ship it out.
Then the other problem I’m having is if I write a letter my tag line goes with it.
But If I return to sender or forward a letter I have to manually type in my tagline.
So your letter went out.
Ron
 
From: Glenn / Lenny
Sent: Sunday, July 14, 2019 18:59
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hi Ron,
I have a weird eMail thing going on, and I'm wondering if a friend's Comcast server is rejecting messages from a WLM client.
Can you send a message to a friend's address and see if he gets it?
If you copy this message from me he will understand, as I've been working with him and Comcast on the phone today, and this is a hypothesis I just came up with.
If he gets a message from you, using WLM, then we'll know that it isn't because Comcast is rejecting WLM messages.
His address is:
josephmachise@...
Thanks.
Glenn

From: Ron Kolesar
Sent: Thursday, June 06, 2019 7:30 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
yes, I do notice that once in a blue moon that a few will go into the inbox instead of where they’re suppose to go into.
I usually double check  the rule AKA filter and go down into the rules and click on modify and double check that everything is set correctly.
But you can’t help that a few will go astray.
Enjoy the rules filter feature and the sub mailbox feature in WLM.
Every time I need to talk to a MS disability operator, while we’re linked together, I’ll recommend those two features and why I know quite of few blind people are using the MS mail app, why I’m staying with WLM and keep asking if they’ll install the two above features into the mail app.
Unless something seriously  happens to WLM or if they finely get all of the bugs out of the mail app, I’m staying with WLM.
Enjoy.
Ron
 
From: Glenn / Lenny
Sent: Wednesday, June 5, 2019 14:05
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron,
Have you ever noticed inconsistencies in the mail filters in WLM?
I have one that filters anything sent to audiotrax into my media folder.
99% of the time it works, but once in a while one slips through into my inbox.
I had the same filters, made just the same in outlook express, and they always worked as expected.
Glenn
 
 
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
That’s a little tricky to do over the phone, and the sound effect would be for all mail not just for the inbox.
Sorry that I can’t be more help.
Ron
 
From: patti
Sent: Wednesday, June 5, 2019 10:03
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 

Hi, I got the rule made, but I want to put a different sound from the inbox sound.

How do I do that?

I’m running windows 10, jaws 18, outlook, and office 2010.

Thanks for any help.

Patti

 

Hi

Marie.

Its really a walk in the park with windows 10 for creating message rules with WLM.

Let Glen and or myself know if you would need help and we’ll do our best to help you out.

Ron Ham Radio Station KR3DOG-PA-WCECTM

 

 

 

From: Marie

Sent: Tuesday, June 4, 2019 11:04

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glad you found this solution because I may have occasion to want to do the same kind of filter. I believe I did have one, once, long ago but had certainly forgotten how to make it work.Thanks for sharing.

Marie

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 9:52 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Ron and All,

Just thought I'd let the list know that I figured out a work-around for the message body not having an edit field in the filter.

I tried not checking the from option, and only selecting the message body and the move to a folder options, and when there was only one option, I got an edit field to put in my criteria.

Then I saved that part, and then I shift tabbed up and added the from option and did that part, and then the rest of the filter worked as usual.

I don't know why that would matter, but this way worked.

 

Glenn

 

From: Ron Kolesar

Sent: Monday, June 03, 2019 2:28 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glen, are you talking about the third roll over in the four rolls?

What I normally do is this.

after doing a alt n for new rule, the first roll I go down to to and cc, but you could get away with just to.

That’s a personal preference.

Tab once to the second roll and you should see move to the specified folder and it should be checked.

The third is probably where you’re having problems.

    I usually skip this one and fill in the name I want the rule to be named first which is the four roll then back tab to the third.

Smack enter on it and you should see a field to inter in the address.

Then if you smack enter twice, you then should see move it to the folder you want to move it to.

Hope this helps.

Ron KR3DOG-PA-WCECTM

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 14:13

To: jaws-users-list@groups.io

Subject: [jaws-users] WLM Filters

 

Hi,

I'm having difficulty creating a filter in Windows Live Mail.

I have several that I have made, so I normally have no problem creating filters.

The criteria that does not seem to be working is

"where the message body contains"

The only two things that are available when I go into it to type in the filter is exact match or any of the criteria.

But there should be an edit field to type in something for it to filter.

There is only those two options, and neither givbes me an edit field.

I've used my Jaws cursor, to look for something to click on, and there is nothing that I can find to click on.  latest Jaws, and this is Windows 7-64.

I have done this before in OE and it allows me to put in some criteria.

Something else strange I noticed, it reads "checked" when it shows other filters and also in some of the options.

If anyone here is using WLM and has figured this one out, I'll write a Thanks in advance for any thoughts.

Glenn

 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG


Re: WLM Filters

Marie <magpie.mn@...>
 

Ron, to fix your issue with the tag line:
Press alt+f to go to the file menu.
Arrow down to Options
press the right arrow to go to the mail options.
press tab+ctrl until you get to the Signatures tab.
The first thing is a check box to include the signature on all outgoing messages. If you check this box, the next line will be don't add signature to replies. You need to uncheck  this box, which is checked by default.
tab down to the  OK button and press enter.
After this, the signature or tag line as you call it should appear on replies as well as new messages.
Marie
 
 

From: Ron Kolesar
Sent: Sunday, July 14, 2019 5:51 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hey Glen.
I simply forward the message that you sent to me via the list to your friend.
So, if I hear of anything I’ll ship it to you.
The only problem I have is that at random I get to copies of the address when I’m shipping out a letter while using jaws and WLM.
The first copy of the address is fine, then with no spaces I have a second copy of the letter enclosed in greater than and less than symbols without a space in between.
Then I have to move the entire line to the cc field to clean up the address then cut it and throw it in the to field before I can ship it out.
Then the other problem I’m having is if I write a letter my tag line goes with it.
But If I return to sender or forward a letter I have to manually type in my tagline.
So your letter went out.
Ron
 
From: Glenn / Lenny
Sent: Sunday, July 14, 2019 18:59
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hi Ron,
I have a weird eMail thing going on, and I'm wondering if a friend's Comcast server is rejecting messages from a WLM client.
Can you send a message to a friend's address and see if he gets it?
If you copy this message from me he will understand, as I've been working with him and Comcast on the phone today, and this is a hypothesis I just came up with.
If he gets a message from you, using WLM, then we'll know that it isn't because Comcast is rejecting WLM messages.
His address is:
josephmachise@...
Thanks.
Glenn

From: Ron Kolesar
Sent: Thursday, June 06, 2019 7:30 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
yes, I do notice that once in a blue moon that a few will go into the inbox instead of where they’re suppose to go into.
I usually double check  the rule AKA filter and go down into the rules and click on modify and double check that everything is set correctly.
But you can’t help that a few will go astray.
Enjoy the rules filter feature and the sub mailbox feature in WLM.
Every time I need to talk to a MS disability operator, while we’re linked together, I’ll recommend those two features and why I know quite of few blind people are using the MS mail app, why I’m staying with WLM and keep asking if they’ll install the two above features into the mail app.
Unless something seriously  happens to WLM or if they finely get all of the bugs out of the mail app, I’m staying with WLM.
Enjoy.
Ron
 
From: Glenn / Lenny
Sent: Wednesday, June 5, 2019 14:05
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron,
Have you ever noticed inconsistencies in the mail filters in WLM?
I have one that filters anything sent to audiotrax into my media folder.
99% of the time it works, but once in a while one slips through into my inbox.
I had the same filters, made just the same in outlook express, and they always worked as expected.
Glenn
 
 
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
That’s a little tricky to do over the phone, and the sound effect would be for all mail not just for the inbox.
Sorry that I can’t be more help.
Ron
 
From: patti
Sent: Wednesday, June 5, 2019 10:03
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 

Hi, I got the rule made, but I want to put a different sound from the inbox sound.

How do I do that?

I’m running windows 10, jaws 18, outlook, and office 2010.

Thanks for any help.

Patti

 

Hi

Marie.

Its really a walk in the park with windows 10 for creating message rules with WLM.

Let Glen and or myself know if you would need help and we’ll do our best to help you out.

Ron Ham Radio Station KR3DOG-PA-WCECTM

 

 

 

From: Marie

Sent: Tuesday, June 4, 2019 11:04

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glad you found this solution because I may have occasion to want to do the same kind of filter. I believe I did have one, once, long ago but had certainly forgotten how to make it work.Thanks for sharing.

Marie

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 9:52 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Ron and All,

Just thought I'd let the list know that I figured out a work-around for the message body not having an edit field in the filter.

I tried not checking the from option, and only selecting the message body and the move to a folder options, and when there was only one option, I got an edit field to put in my criteria.

Then I saved that part, and then I shift tabbed up and added the from option and did that part, and then the rest of the filter worked as usual.

I don't know why that would matter, but this way worked.

 

Glenn

 

From: Ron Kolesar

Sent: Monday, June 03, 2019 2:28 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glen, are you talking about the third roll over in the four rolls?

What I normally do is this.

after doing a alt n for new rule, the first roll I go down to to and cc, but you could get away with just to.

That’s a personal preference.

Tab once to the second roll and you should see move to the specified folder and it should be checked.

The third is probably where you’re having problems.

    I usually skip this one and fill in the name I want the rule to be named first which is the four roll then back tab to the third.

Smack enter on it and you should see a field to inter in the address.

Then if you smack enter twice, you then should see move it to the folder you want to move it to.

Hope this helps.

Ron KR3DOG-PA-WCECTM

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 14:13

To: jaws-users-list@groups.io

Subject: [jaws-users] WLM Filters

 

Hi,

I'm having difficulty creating a filter in Windows Live Mail.

I have several that I have made, so I normally have no problem creating filters.

The criteria that does not seem to be working is

"where the message body contains"

The only two things that are available when I go into it to type in the filter is exact match or any of the criteria.

But there should be an edit field to type in something for it to filter.

There is only those two options, and neither givbes me an edit field.

I've used my Jaws cursor, to look for something to click on, and there is nothing that I can find to click on.  latest Jaws, and this is Windows 7-64.

I have done this before in OE and it allows me to put in some criteria.

Something else strange I noticed, it reads "checked" when it shows other filters and also in some of the options.

If anyone here is using WLM and has figured this one out, I'll write a Thanks in advance for any thoughts.

Glenn

 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG


FYI Microsoft One Note and JAWS

John Gassman <johngassman@...>
 

Hi,
Brian Hartgen is going to do a two week training course on Microsoft One Note and JAWS.
this is not a promotion of that course, its just for your information.
If you'd like to read more about the course and cost, visit <http://hartgen.org/onenotewonder>http://hartgen.org/onenotewonder

John



JAWS Certified, 2014.
http://www.FreedomScientific.com/Certification


Re: WLM Filters

Glenn / Lenny
 

Thanks much, Ron.
 
Glenn

Sent: Sunday, July 14, 2019 7:51 PM
Subject: Re: [jaws-users] WLM Filters

Hey Glen.
I simply forward the message that you sent to me via the list to your friend.
So, if I hear of anything I’ll ship it to you.
The only problem I have is that at random I get to copies of the address when I’m shipping out a letter while using jaws and WLM.
The first copy of the address is fine, then with no spaces I have a second copy of the letter enclosed in greater than and less than symbols without a space in between.
Then I have to move the entire line to the cc field to clean up the address then cut it and throw it in the to field before I can ship it out.
Then the other problem I’m having is if I write a letter my tag line goes with it.
But If I return to sender or forward a letter I have to manually type in my tagline.
So your letter went out.
Ron
 
From: Glenn / Lenny
Sent: Sunday, July 14, 2019 18:59
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hi Ron,
I have a weird eMail thing going on, and I'm wondering if a friend's Comcast server is rejecting messages from a WLM client.
Can you send a message to a friend's address and see if he gets it?
If you copy this message from me he will understand, as I've been working with him and Comcast on the phone today, and this is a hypothesis I just came up with.
If he gets a message from you, using WLM, then we'll know that it isn't because Comcast is rejecting WLM messages.
His address is:
josephmachise@...
Thanks.
Glenn

From: Ron Kolesar
Sent: Thursday, June 06, 2019 7:30 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
yes, I do notice that once in a blue moon that a few will go into the inbox instead of where they’re suppose to go into.
I usually double check  the rule AKA filter and go down into the rules and click on modify and double check that everything is set correctly.
But you can’t help that a few will go astray.
Enjoy the rules filter feature and the sub mailbox feature in WLM.
Every time I need to talk to a MS disability operator, while we’re linked together, I’ll recommend those two features and why I know quite of few blind people are using the MS mail app, why I’m staying with WLM and keep asking if they’ll install the two above features into the mail app.
Unless something seriously  happens to WLM or if they finely get all of the bugs out of the mail app, I’m staying with WLM.
Enjoy.
Ron
 
From: Glenn / Lenny
Sent: Wednesday, June 5, 2019 14:05
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron,
Have you ever noticed inconsistencies in the mail filters in WLM?
I have one that filters anything sent to audiotrax into my media folder.
99% of the time it works, but once in a while one slips through into my inbox.
I had the same filters, made just the same in outlook express, and they always worked as expected.
Glenn
 
 
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
That’s a little tricky to do over the phone, and the sound effect would be for all mail not just for the inbox.
Sorry that I can’t be more help.
Ron
 
From: patti
Sent: Wednesday, June 5, 2019 10:03
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 

Hi, I got the rule made, but I want to put a different sound from the inbox sound.

How do I do that?

I’m running windows 10, jaws 18, outlook, and office 2010.

Thanks for any help.

Patti

 

Hi

Marie.

Its really a walk in the park with windows 10 for creating message rules with WLM.

Let Glen and or myself know if you would need help and we’ll do our best to help you out.

Ron Ham Radio Station KR3DOG-PA-WCECTM

 

 

 

From: Marie

Sent: Tuesday, June 4, 2019 11:04

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glad you found this solution because I may have occasion to want to do the same kind of filter. I believe I did have one, once, long ago but had certainly forgotten how to make it work.Thanks for sharing.

Marie

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 9:52 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Ron and All,

Just thought I'd let the list know that I figured out a work-around for the message body not having an edit field in the filter.

I tried not checking the from option, and only selecting the message body and the move to a folder options, and when there was only one option, I got an edit field to put in my criteria.

Then I saved that part, and then I shift tabbed up and added the from option and did that part, and then the rest of the filter worked as usual.

I don't know why that would matter, but this way worked.

 

Glenn

 

From: Ron Kolesar

Sent: Monday, June 03, 2019 2:28 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glen, are you talking about the third roll over in the four rolls?

What I normally do is this.

after doing a alt n for new rule, the first roll I go down to to and cc, but you could get away with just to.

That’s a personal preference.

Tab once to the second roll and you should see move to the specified folder and it should be checked.

The third is probably where you’re having problems.

    I usually skip this one and fill in the name I want the rule to be named first which is the four roll then back tab to the third.

Smack enter on it and you should see a field to inter in the address.

Then if you smack enter twice, you then should see move it to the folder you want to move it to.

Hope this helps.

Ron KR3DOG-PA-WCECTM

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 14:13

To: jaws-users-list@groups.io

Subject: [jaws-users] WLM Filters

 

Hi,

I'm having difficulty creating a filter in Windows Live Mail.

I have several that I have made, so I normally have no problem creating filters.

The criteria that does not seem to be working is

"where the message body contains"

The only two things that are available when I go into it to type in the filter is exact match or any of the criteria.

But there should be an edit field to type in something for it to filter.

There is only those two options, and neither givbes me an edit field.

I've used my Jaws cursor, to look for something to click on, and there is nothing that I can find to click on.  latest Jaws, and this is Windows 7-64.

I have done this before in OE and it allows me to put in some criteria.

Something else strange I noticed, it reads "checked" when it shows other filters and also in some of the options.

If anyone here is using WLM and has figured this one out, I'll write a Thanks in advance for any thoughts.

Glenn

 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG


Re: WLM Filters

Ron Kolesar
 

Hey Glen.
I simply forward the message that you sent to me via the list to your friend.
So, if I hear of anything I’ll ship it to you.
The only problem I have is that at random I get to copies of the address when I’m shipping out a letter while using jaws and WLM.
The first copy of the address is fine, then with no spaces I have a second copy of the letter enclosed in greater than and less than symbols without a space in between.
Then I have to move the entire line to the cc field to clean up the address then cut it and throw it in the to field before I can ship it out.
Then the other problem I’m having is if I write a letter my tag line goes with it.
But If I return to sender or forward a letter I have to manually type in my tagline.
So your letter went out.
Ron
 

From: Glenn / Lenny
Sent: Sunday, July 14, 2019 18:59
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hi Ron,
I have a weird eMail thing going on, and I'm wondering if a friend's Comcast server is rejecting messages from a WLM client.
Can you send a message to a friend's address and see if he gets it?
If you copy this message from me he will understand, as I've been working with him and Comcast on the phone today, and this is a hypothesis I just came up with.
If he gets a message from you, using WLM, then we'll know that it isn't because Comcast is rejecting WLM messages.
His address is:
josephmachise@...
Thanks.
Glenn

From: Ron Kolesar
Sent: Thursday, June 06, 2019 7:30 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
yes, I do notice that once in a blue moon that a few will go into the inbox instead of where they’re suppose to go into.
I usually double check  the rule AKA filter and go down into the rules and click on modify and double check that everything is set correctly.
But you can’t help that a few will go astray.
Enjoy the rules filter feature and the sub mailbox feature in WLM.
Every time I need to talk to a MS disability operator, while we’re linked together, I’ll recommend those two features and why I know quite of few blind people are using the MS mail app, why I’m staying with WLM and keep asking if they’ll install the two above features into the mail app.
Unless something seriously  happens to WLM or if they finely get all of the bugs out of the mail app, I’m staying with WLM.
Enjoy.
Ron
 
From: Glenn / Lenny
Sent: Wednesday, June 5, 2019 14:05
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron,
Have you ever noticed inconsistencies in the mail filters in WLM?
I have one that filters anything sent to audiotrax into my media folder.
99% of the time it works, but once in a while one slips through into my inbox.
I had the same filters, made just the same in outlook express, and they always worked as expected.
Glenn
 
 
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
That’s a little tricky to do over the phone, and the sound effect would be for all mail not just for the inbox.
Sorry that I can’t be more help.
Ron
 
From: patti
Sent: Wednesday, June 5, 2019 10:03
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 

Hi, I got the rule made, but I want to put a different sound from the inbox sound.

How do I do that?

I’m running windows 10, jaws 18, outlook, and office 2010.

Thanks for any help.

Patti

 

Hi

Marie.

Its really a walk in the park with windows 10 for creating message rules with WLM.

Let Glen and or myself know if you would need help and we’ll do our best to help you out.

Ron Ham Radio Station KR3DOG-PA-WCECTM

 

 

 

From: Marie

Sent: Tuesday, June 4, 2019 11:04

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glad you found this solution because I may have occasion to want to do the same kind of filter. I believe I did have one, once, long ago but had certainly forgotten how to make it work.Thanks for sharing.

Marie

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 9:52 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Ron and All,

Just thought I'd let the list know that I figured out a work-around for the message body not having an edit field in the filter.

I tried not checking the from option, and only selecting the message body and the move to a folder options, and when there was only one option, I got an edit field to put in my criteria.

Then I saved that part, and then I shift tabbed up and added the from option and did that part, and then the rest of the filter worked as usual.

I don't know why that would matter, but this way worked.

 

Glenn

 

From: Ron Kolesar

Sent: Monday, June 03, 2019 2:28 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glen, are you talking about the third roll over in the four rolls?

What I normally do is this.

after doing a alt n for new rule, the first roll I go down to to and cc, but you could get away with just to.

That’s a personal preference.

Tab once to the second roll and you should see move to the specified folder and it should be checked.

The third is probably where you’re having problems.

    I usually skip this one and fill in the name I want the rule to be named first which is the four roll then back tab to the third.

Smack enter on it and you should see a field to inter in the address.

Then if you smack enter twice, you then should see move it to the folder you want to move it to.

Hope this helps.

Ron KR3DOG-PA-WCECTM

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 14:13

To: jaws-users-list@groups.io

Subject: [jaws-users] WLM Filters

 

Hi,

I'm having difficulty creating a filter in Windows Live Mail.

I have several that I have made, so I normally have no problem creating filters.

The criteria that does not seem to be working is

"where the message body contains"

The only two things that are available when I go into it to type in the filter is exact match or any of the criteria.

But there should be an edit field to type in something for it to filter.

There is only those two options, and neither givbes me an edit field.

I've used my Jaws cursor, to look for something to click on, and there is nothing that I can find to click on.  latest Jaws, and this is Windows 7-64.

I have done this before in OE and it allows me to put in some criteria.

Something else strange I noticed, it reads "checked" when it shows other filters and also in some of the options.

If anyone here is using WLM and has figured this one out, I'll write a Thanks in advance for any thoughts.

Glenn

 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG


Re: WLM Filters

Glenn / Lenny
 

Hi Marie,
It may have to do with his spam settings on Comcast, so although I think it is Comcast, and it is specifically his account, I don't know if WLM has anything to do with it.
Glenn

From: Marie
Sent: Sunday, July 14, 2019 7:11 PM
Subject: Re: [jaws-users] WLM Filters

I know you meant this to go directly to Ron, but I can assure you that ComCast is not rejecting emails from WLM.
Marie
 
 
From: Glenn / Lenny
Sent: Sunday, July 14, 2019 3:59 PM
Subject: Re: [jaws-users] WLM Filters
 
Hi Ron,
I have a weird eMail thing going on, and I'm wondering if a friend's Comcast server is rejecting messages from a WLM client.
Can you send a message to a friend's address and see if he gets it?
If you copy this message from me he will understand, as I've been working with him and Comcast on the phone today, and this is a hypothesis I just came up with.
If he gets a message from you, using WLM, then we'll know that it isn't because Comcast is rejecting WLM messages.
His address is:
josephmachise@...
Thanks.
Glenn

From: Ron Kolesar
Sent: Thursday, June 06, 2019 7:30 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
yes, I do notice that once in a blue moon that a few will go into the inbox instead of where they’re suppose to go into.
I usually double check  the rule AKA filter and go down into the rules and click on modify and double check that everything is set correctly.
But you can’t help that a few will go astray.
Enjoy the rules filter feature and the sub mailbox feature in WLM.
Every time I need to talk to a MS disability operator, while we’re linked together, I’ll recommend those two features and why I know quite of few blind people are using the MS mail app, why I’m staying with WLM and keep asking if they’ll install the two above features into the mail app.
Unless something seriously  happens to WLM or if they finely get all of the bugs out of the mail app, I’m staying with WLM.
Enjoy.
Ron
 
From: Glenn / Lenny
Sent: Wednesday, June 5, 2019 14:05
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron,
Have you ever noticed inconsistencies in the mail filters in WLM?
I have one that filters anything sent to audiotrax into my media folder.
99% of the time it works, but once in a while one slips through into my inbox.
I had the same filters, made just the same in outlook express, and they always worked as expected.
Glenn
 
 
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
That’s a little tricky to do over the phone, and the sound effect would be for all mail not just for the inbox.
Sorry that I can’t be more help.
Ron
 
From: patti
Sent: Wednesday, June 5, 2019 10:03
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 

Hi, I got the rule made, but I want to put a different sound from the inbox sound.

How do I do that?

I’m running windows 10, jaws 18, outlook, and office 2010.

Thanks for any help.

Patti

 

Hi

Marie.

Its really a walk in the park with windows 10 for creating message rules with WLM.

Let Glen and or myself know if you would need help and we’ll do our best to help you out.

Ron Ham Radio Station KR3DOG-PA-WCECTM

 

 

 

From: Marie

Sent: Tuesday, June 4, 2019 11:04

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glad you found this solution because I may have occasion to want to do the same kind of filter. I believe I did have one, once, long ago but had certainly forgotten how to make it work.Thanks for sharing.

Marie

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 9:52 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Ron and All,

Just thought I'd let the list know that I figured out a work-around for the message body not having an edit field in the filter.

I tried not checking the from option, and only selecting the message body and the move to a folder options, and when there was only one option, I got an edit field to put in my criteria.

Then I saved that part, and then I shift tabbed up and added the from option and did that part, and then the rest of the filter worked as usual.

I don't know why that would matter, but this way worked.

 

Glenn

 

From: Ron Kolesar

Sent: Monday, June 03, 2019 2:28 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glen, are you talking about the third roll over in the four rolls?

What I normally do is this.

after doing a alt n for new rule, the first roll I go down to to and cc, but you could get away with just to.

That’s a personal preference.

Tab once to the second roll and you should see move to the specified folder and it should be checked.

The third is probably where you’re having problems.

    I usually skip this one and fill in the name I want the rule to be named first which is the four roll then back tab to the third.

Smack enter on it and you should see a field to inter in the address.

Then if you smack enter twice, you then should see move it to the folder you want to move it to.

Hope this helps.

Ron KR3DOG-PA-WCECTM

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 14:13

To: jaws-users-list@groups.io

Subject: [jaws-users] WLM Filters

 

Hi,

I'm having difficulty creating a filter in Windows Live Mail.

I have several that I have made, so I normally have no problem creating filters.

The criteria that does not seem to be working is

"where the message body contains"

The only two things that are available when I go into it to type in the filter is exact match or any of the criteria.

But there should be an edit field to type in something for it to filter.

There is only those two options, and neither givbes me an edit field.

I've used my Jaws cursor, to look for something to click on, and there is nothing that I can find to click on.  latest Jaws, and this is Windows 7-64.

I have done this before in OE and it allows me to put in some criteria.

Something else strange I noticed, it reads "checked" when it shows other filters and also in some of the options.

If anyone here is using WLM and has figured this one out, I'll write a Thanks in advance for any thoughts.

Glenn

 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Re: WLM Filters

Marie <magpie.mn@...>
 

I know you meant this to go directly to Ron, but I can assure you that ComCast is not rejecting emails from WLM.
Marie
 
 

From: Glenn / Lenny
Sent: Sunday, July 14, 2019 3:59 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Hi Ron,
I have a weird eMail thing going on, and I'm wondering if a friend's Comcast server is rejecting messages from a WLM client.
Can you send a message to a friend's address and see if he gets it?
If you copy this message from me he will understand, as I've been working with him and Comcast on the phone today, and this is a hypothesis I just came up with.
If he gets a message from you, using WLM, then we'll know that it isn't because Comcast is rejecting WLM messages.
His address is:
josephmachise@...
Thanks.
Glenn

From: Ron Kolesar
Sent: Thursday, June 06, 2019 7:30 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
yes, I do notice that once in a blue moon that a few will go into the inbox instead of where they’re suppose to go into.
I usually double check  the rule AKA filter and go down into the rules and click on modify and double check that everything is set correctly.
But you can’t help that a few will go astray.
Enjoy the rules filter feature and the sub mailbox feature in WLM.
Every time I need to talk to a MS disability operator, while we’re linked together, I’ll recommend those two features and why I know quite of few blind people are using the MS mail app, why I’m staying with WLM and keep asking if they’ll install the two above features into the mail app.
Unless something seriously  happens to WLM or if they finely get all of the bugs out of the mail app, I’m staying with WLM.
Enjoy.
Ron
 
From: Glenn / Lenny
Sent: Wednesday, June 5, 2019 14:05
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron,
Have you ever noticed inconsistencies in the mail filters in WLM?
I have one that filters anything sent to audiotrax into my media folder.
99% of the time it works, but once in a while one slips through into my inbox.
I had the same filters, made just the same in outlook express, and they always worked as expected.
Glenn
 
 
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
That’s a little tricky to do over the phone, and the sound effect would be for all mail not just for the inbox.
Sorry that I can’t be more help.
Ron
 
From: patti
Sent: Wednesday, June 5, 2019 10:03
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 

Hi, I got the rule made, but I want to put a different sound from the inbox sound.

How do I do that?

I’m running windows 10, jaws 18, outlook, and office 2010.

Thanks for any help.

Patti

 

Hi

Marie.

Its really a walk in the park with windows 10 for creating message rules with WLM.

Let Glen and or myself know if you would need help and we’ll do our best to help you out.

Ron Ham Radio Station KR3DOG-PA-WCECTM

 

 

 

From: Marie

Sent: Tuesday, June 4, 2019 11:04

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glad you found this solution because I may have occasion to want to do the same kind of filter. I believe I did have one, once, long ago but had certainly forgotten how to make it work.Thanks for sharing.

Marie

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 9:52 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Ron and All,

Just thought I'd let the list know that I figured out a work-around for the message body not having an edit field in the filter.

I tried not checking the from option, and only selecting the message body and the move to a folder options, and when there was only one option, I got an edit field to put in my criteria.

Then I saved that part, and then I shift tabbed up and added the from option and did that part, and then the rest of the filter worked as usual.

I don't know why that would matter, but this way worked.

 

Glenn

 

From: Ron Kolesar

Sent: Monday, June 03, 2019 2:28 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glen, are you talking about the third roll over in the four rolls?

What I normally do is this.

after doing a alt n for new rule, the first roll I go down to to and cc, but you could get away with just to.

That’s a personal preference.

Tab once to the second roll and you should see move to the specified folder and it should be checked.

The third is probably where you’re having problems.

    I usually skip this one and fill in the name I want the rule to be named first which is the four roll then back tab to the third.

Smack enter on it and you should see a field to inter in the address.

Then if you smack enter twice, you then should see move it to the folder you want to move it to.

Hope this helps.

Ron KR3DOG-PA-WCECTM

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 14:13

To: jaws-users-list@groups.io

Subject: [jaws-users] WLM Filters

 

Hi,

I'm having difficulty creating a filter in Windows Live Mail.

I have several that I have made, so I normally have no problem creating filters.

The criteria that does not seem to be working is

"where the message body contains"

The only two things that are available when I go into it to type in the filter is exact match or any of the criteria.

But there should be an edit field to type in something for it to filter.

There is only those two options, and neither givbes me an edit field.

I've used my Jaws cursor, to look for something to click on, and there is nothing that I can find to click on.  latest Jaws, and this is Windows 7-64.

I have done this before in OE and it allows me to put in some criteria.

Something else strange I noticed, it reads "checked" when it shows other filters and also in some of the options.

If anyone here is using WLM and has figured this one out, I'll write a Thanks in advance for any thoughts.

Glenn

 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Re: WLM Filters

Glenn / Lenny
 

Sorry list, I thought I was responding to Ron privately.
Glenn

Sent: Sunday, July 14, 2019 5:59 PM
Subject: Re: [jaws-users] WLM Filters

Hi Ron,
I have a weird eMail thing going on, and I'm wondering if a friend's Comcast server is rejecting messages from a WLM client.
Can you send a message to a friend's address and see if he gets it?
If you copy this message from me he will understand, as I've been working with him and Comcast on the phone today, and this is a hypothesis I just came up with.
If he gets a message from you, using WLM, then we'll know that it isn't because Comcast is rejecting WLM messages.
His address is:
Thanks.
Glenn

Sent: Thursday, June 06, 2019 7:30 AM
Subject: Re: [jaws-users] WLM Filters

yes, I do notice that once in a blue moon that a few will go into the inbox instead of where they’re suppose to go into.
I usually double check  the rule AKA filter and go down into the rules and click on modify and double check that everything is set correctly.
But you can’t help that a few will go astray.
Enjoy the rules filter feature and the sub mailbox feature in WLM.
Every time I need to talk to a MS disability operator, while we’re linked together, I’ll recommend those two features and why I know quite of few blind people are using the MS mail app, why I’m staying with WLM and keep asking if they’ll install the two above features into the mail app.
Unless something seriously  happens to WLM or if they finely get all of the bugs out of the mail app, I’m staying with WLM.
Enjoy.
Ron
 
From: Glenn / Lenny
Sent: Wednesday, June 5, 2019 14:05
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron,
Have you ever noticed inconsistencies in the mail filters in WLM?
I have one that filters anything sent to audiotrax into my media folder.
99% of the time it works, but once in a while one slips through into my inbox.
I had the same filters, made just the same in outlook express, and they always worked as expected.
Glenn
 
 
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
That’s a little tricky to do over the phone, and the sound effect would be for all mail not just for the inbox.
Sorry that I can’t be more help.
Ron
 
From: patti
Sent: Wednesday, June 5, 2019 10:03
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 

Hi, I got the rule made, but I want to put a different sound from the inbox sound.

How do I do that?

I’m running windows 10, jaws 18, outlook, and office 2010.

Thanks for any help.

Patti

 

Hi

Marie.

Its really a walk in the park with windows 10 for creating message rules with WLM.

Let Glen and or myself know if you would need help and we’ll do our best to help you out.

Ron Ham Radio Station KR3DOG-PA-WCECTM

 

 

 

From: Marie

Sent: Tuesday, June 4, 2019 11:04

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glad you found this solution because I may have occasion to want to do the same kind of filter. I believe I did have one, once, long ago but had certainly forgotten how to make it work.Thanks for sharing.

Marie

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 9:52 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Ron and All,

Just thought I'd let the list know that I figured out a work-around for the message body not having an edit field in the filter.

I tried not checking the from option, and only selecting the message body and the move to a folder options, and when there was only one option, I got an edit field to put in my criteria.

Then I saved that part, and then I shift tabbed up and added the from option and did that part, and then the rest of the filter worked as usual.

I don't know why that would matter, but this way worked.

 

Glenn

 

From: Ron Kolesar

Sent: Monday, June 03, 2019 2:28 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glen, are you talking about the third roll over in the four rolls?

What I normally do is this.

after doing a alt n for new rule, the first roll I go down to to and cc, but you could get away with just to.

That’s a personal preference.

Tab once to the second roll and you should see move to the specified folder and it should be checked.

The third is probably where you’re having problems.

    I usually skip this one and fill in the name I want the rule to be named first which is the four roll then back tab to the third.

Smack enter on it and you should see a field to inter in the address.

Then if you smack enter twice, you then should see move it to the folder you want to move it to.

Hope this helps.

Ron KR3DOG-PA-WCECTM

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 14:13

To: jaws-users-list@groups.io

Subject: [jaws-users] WLM Filters

 

Hi,

I'm having difficulty creating a filter in Windows Live Mail.

I have several that I have made, so I normally have no problem creating filters.

The criteria that does not seem to be working is

"where the message body contains"

The only two things that are available when I go into it to type in the filter is exact match or any of the criteria.

But there should be an edit field to type in something for it to filter.

There is only those two options, and neither givbes me an edit field.

I've used my Jaws cursor, to look for something to click on, and there is nothing that I can find to click on.  latest Jaws, and this is Windows 7-64.

I have done this before in OE and it allows me to put in some criteria.

Something else strange I noticed, it reads "checked" when it shows other filters and also in some of the options.

If anyone here is using WLM and has figured this one out, I'll write a Thanks in advance for any thoughts.

Glenn

 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Re: WLM Filters

Glenn / Lenny
 

Hi Ron,
I have a weird eMail thing going on, and I'm wondering if a friend's Comcast server is rejecting messages from a WLM client.
Can you send a message to a friend's address and see if he gets it?
If you copy this message from me he will understand, as I've been working with him and Comcast on the phone today, and this is a hypothesis I just came up with.
If he gets a message from you, using WLM, then we'll know that it isn't because Comcast is rejecting WLM messages.
His address is:
Thanks.
Glenn

Sent: Thursday, June 06, 2019 7:30 AM
Subject: Re: [jaws-users] WLM Filters

yes, I do notice that once in a blue moon that a few will go into the inbox instead of where they’re suppose to go into.
I usually double check  the rule AKA filter and go down into the rules and click on modify and double check that everything is set correctly.
But you can’t help that a few will go astray.
Enjoy the rules filter feature and the sub mailbox feature in WLM.
Every time I need to talk to a MS disability operator, while we’re linked together, I’ll recommend those two features and why I know quite of few blind people are using the MS mail app, why I’m staying with WLM and keep asking if they’ll install the two above features into the mail app.
Unless something seriously  happens to WLM or if they finely get all of the bugs out of the mail app, I’m staying with WLM.
Enjoy.
Ron
 
From: Glenn / Lenny
Sent: Wednesday, June 5, 2019 14:05
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
Ron,
Have you ever noticed inconsistencies in the mail filters in WLM?
I have one that filters anything sent to audiotrax into my media folder.
99% of the time it works, but once in a while one slips through into my inbox.
I had the same filters, made just the same in outlook express, and they always worked as expected.
Glenn
 
 
From: Ron Kolesar
Sent: Wednesday, June 05, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 
That’s a little tricky to do over the phone, and the sound effect would be for all mail not just for the inbox.
Sorry that I can’t be more help.
Ron
 
From: patti
Sent: Wednesday, June 5, 2019 10:03
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] WLM Filters
 

Hi, I got the rule made, but I want to put a different sound from the inbox sound.

How do I do that?

I’m running windows 10, jaws 18, outlook, and office 2010.

Thanks for any help.

Patti

 

Hi

Marie.

Its really a walk in the park with windows 10 for creating message rules with WLM.

Let Glen and or myself know if you would need help and we’ll do our best to help you out.

Ron Ham Radio Station KR3DOG-PA-WCECTM

 

 

 

From: Marie

Sent: Tuesday, June 4, 2019 11:04

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glad you found this solution because I may have occasion to want to do the same kind of filter. I believe I did have one, once, long ago but had certainly forgotten how to make it work.Thanks for sharing.

Marie

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 9:52 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Ron and All,

Just thought I'd let the list know that I figured out a work-around for the message body not having an edit field in the filter.

I tried not checking the from option, and only selecting the message body and the move to a folder options, and when there was only one option, I got an edit field to put in my criteria.

Then I saved that part, and then I shift tabbed up and added the from option and did that part, and then the rest of the filter worked as usual.

I don't know why that would matter, but this way worked.

 

Glenn

 

From: Ron Kolesar

Sent: Monday, June 03, 2019 2:28 PM

To: jaws-users-list@groups.io

Subject: Re: [jaws-users] WLM Filters

 

Glen, are you talking about the third roll over in the four rolls?

What I normally do is this.

after doing a alt n for new rule, the first roll I go down to to and cc, but you could get away with just to.

That’s a personal preference.

Tab once to the second roll and you should see move to the specified folder and it should be checked.

The third is probably where you’re having problems.

    I usually skip this one and fill in the name I want the rule to be named first which is the four roll then back tab to the third.

Smack enter on it and you should see a field to inter in the address.

Then if you smack enter twice, you then should see move it to the folder you want to move it to.

Hope this helps.

Ron KR3DOG-PA-WCECTM

 

 

From: Glenn / Lenny

Sent: Monday, June 3, 2019 14:13

To: jaws-users-list@groups.io

Subject: [jaws-users] WLM Filters

 

Hi,

I'm having difficulty creating a filter in Windows Live Mail.

I have several that I have made, so I normally have no problem creating filters.

The criteria that does not seem to be working is

"where the message body contains"

The only two things that are available when I go into it to type in the filter is exact match or any of the criteria.

But there should be an edit field to type in something for it to filter.

There is only those two options, and neither givbes me an edit field.

I've used my Jaws cursor, to look for something to click on, and there is nothing that I can find to click on.  latest Jaws, and this is Windows 7-64.

I have done this before in OE and it allows me to put in some criteria.

Something else strange I noticed, it reads "checked" when it shows other filters and also in some of the options.

If anyone here is using WLM and has figured this one out, I'll write a Thanks in advance for any thoughts.

Glenn

 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


photoshop elements 4 and jaws 2018

Kevin <kleeva5@...>
 

I have an old adobe photoshop elements version 4, I was wondering if it plays nicely with jaws 2018.

I got elements before my vision decreased and it’s quite expensive so I don’t want to waste it!

 

E-mail is golden!!!
Kevin Lee

 

1201 - 1220 of 13767