Date   

Re: JAWS Shutdown Sound

Richard Turner <richardturner42@...>
 

According to this How To Geek article, you have to now edit the registry to get the exit windows sound back.
Up to you if you want to do this, but this is the link to the article I found:
https://www.howtogeek.com/274010/how-to-change-the-windows-10-logoff-logon-and-shutdown-sounds-in-windows-10/

Richard


Check out my web site at: www.turner42.com
“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59

-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Gerald Levy via Groups.Io
Sent: Friday, June 21, 2019 3:09 AM
To: JAWS Users <jaws-users-list@groups.io>
Subject: [jaws-users] JAWS Shutdown Sound


One of the most annoying things about running Windows 10 is that there is no shutdown sound to indicate that your computer has shut down like in previous versions of Windows.?? The only reliable way to determine for sure that your computer has shut down completely is to listen for the internal cooling fan to stop spinning, which is not always possible, especially with a laptop whose internal fan may emit little or no noise.?? But the next best thing would be to have JAWS issue a shutdown sound whenever you close it manually or you shut down your computer.?? Is there any way to assign a shutdown sound to JAWS??? That other unmentionable screen reader has a shutdown sound, so I don't see any reason why JAWS couldn't have one, also.


Gerald


Re: Filling out an envelope

Rick Justice <ricjustice@...>
 

Hi Ron,
I am using Word 2007 on Win7, and Jaws 2019 and the envelope wizard works
very well for printing envelopes.
Typically on HP ink jet printers,the envelope would go in
with the flap facing up and pointing to the right,
and on laser printers the flap would be facing down and pointing to the
right.
Where the envelope is positioned in the paper tray will depend on the model,
in my old HP, the envelope was positioned in the right side of the paper
tray oriented as mentioned above,
but in my newer printer, the paper has to be removed and the envelope guide
must be used to center the envelope in the paper tray.

HTH,
Rick Justice

"Tomorrow's another day, another way!"
"and if tomorrow never comes, problem solved!"

----- Original Message -----
From: "Ron Kolesar" <kolesar16417@...>
To: <jaws-users-list@groups.io>
Sent: Friday, June 21, 2019 6:51 AM
Subject: Re: [jaws-users] Filling out an envelope


Hey Judy, long time no talk or see, from Ron Kolesar Ham Radio Station
KR3DOG-PA-WCECTM
I have a HP all in one printer.
When I insert a envelope, which is almost never these days when ever
possible first.
I try to use a persons and or company’s e-mail address.
But do you place the envelope in length ways and if so, with the flap side
up and or down and to the let and or to the right?
Also, or do you place it with ways where the flap is going across instead of
up and down?
And the above questions apply to if the envelope is in length ways or with
ways.
Very Thankfully yours, A lost friend Ron Kolesar Ham Radio Station
KR3DOG-PA-WCECTM
Pennsylvania West County emergency Com-Tree Manager.

From: Judy Jones
Sent: Thursday, June 20, 2019 18:08
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

Not unlike using a typewriter the way we used to back in the day. I
remember the spacing learned back then.



Judy

“Embrace the day with its mercies and blessings.”




From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf
Of Rebecca Lineberger
Sent: Thursday, June 20, 2019 2:09 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope



I have Word 2010, not 2016, so I don’t know if this will work for you.

If I want to print an envelope, I find it easiest to type the information in
a blank document. The return address goes at the top, not indented, then
the delivery address several lines below, again not indented.

When I go to the mailings tab and then to envelopes, everything is already
filled in, in the proper places. I have the envelope inserted into the
printer and all I have to do is tab until I get to print. Some printers
have an actual physical button to press to start the printer and sometimes
there’s a continue button on the screen which you may have to alt-tab to.
Someone may have to show you the first time just to make sure the envelope
is inserted as it should be and to make sure it printed properly.



From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf
Of Judy Jones
Sent: Thursday, June 20, 2019 3:43 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope



I have found Microsoft doesn’t play nice with their mailings tab, and stick
with Avery all the way.



Judy

“Embrace the day with its mercies and blessings.”





From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf
Of Kate Walsh
Sent: Thursday, June 20, 2019 12:14 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Filling out an envelope



Hi All,

I am using JAWS 2019 with the latest version, office 2016 and windows 10.

When I go to fill out an envelope, I pulled up a word document and than
pressed alt plus m for the mailings tab than e for envelopes.

It says divelery address so I typed in the persons name and than pressed
enter to type in the address but it doesn’t do anything.

I tried typing in their whole address and using the reading command but it
just says envelopes and labels.

Any suggestions on how I can fix this problem.

Thanks in advance.

Kate Walsh



In the good old days of Morse code Shorthand, 73's AKA Best Regards and or
Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


CCleaner question

Dennis L
 

Hi, for those that have the pro version that can do things like automatically delete browsing on exit is there a way to tell what is checked and unchecked?  Thanks.


Re: Filling out an envelope

Rebecca Lineberger
 

I would just skip a line or two, as you would have done in the olden days when you were writing a formal business letter with both addresses listed at the left before the body of the letter begins.

 

Actually, if you’ve saved your return address, you don’t have to type that at all.  It will be filled in for you.

If you use the edit field in the mailings envelope tab, you don’t have to do anything but fill in the information:

Name

Address

City, State zip

Just pay attention as you tab through the fields and options on the way to the print button and follow the prompts.  This is not that complicated.  Smile.

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Justin Williams
Sent: Thursday, June 20, 2019 10:28 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

How far do you have to go down between the pieces of info on the page?

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Rebecca Lineberger
Sent: Thursday, June 20, 2019 8:57 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

If you’ve told Word what size envelope you have, Word will put the addresses where they need to go.  Writing the addresses in a blank document—no indentation necessary—is just a way to have Word fill in the edit fields for you.  You can always fill in the fields yourself from the mailings/envelopes tab.  Again, I just type in the addresses, no indentation required, since Word has a template for the envelope size you’ve selected.

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Glenn / Lenny
Sent: Thursday, June 20, 2019 6:06 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

How far do you indent for business size versus a small envelope?

Thanks

 

 

Sent: Thursday, June 20, 2019 4:08 PM

Subject: Re: [jaws-users] Filling out an envelope

 

I have Word 2010, not 2016, so I don’t know if this will work for you. 

If I want to print an envelope, I find it easiest to type the information in a blank document.  The return address goes at the top, not indented, then the delivery address several lines below, again not indented.

When I go to the mailings tab and then to envelopes, everything is already filled in, in the proper places.  I have the envelope inserted into the printer and all I have to do is tab until I get to print.  Some printers have an actual physical button to press to start the printer and sometimes there’s a continue button on the screen which you may have to alt-tab to.  Someone may have to show you the first time just to make sure the envelope is inserted as it should be and to make sure it printed properly.    

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Judy Jones
Sent: Thursday, June 20, 2019 3:43 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

I have found Microsoft doesn’t play nice with their mailings tab, and stick with Avery all the way.

 

Judy

“Embrace the day with its mercies and blessings.”

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Kate Walsh
Sent: Thursday, June 20, 2019 12:14 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Filling out an envelope

 

Hi All,

I am using JAWS 2019 with the latest version, office 2016 and windows 10.

When I go to fill out an envelope, I pulled up a word document and than pressed alt plus m for the mailings tab than e for envelopes.

It says divelery address so I typed in the persons name and than pressed enter to type in the address but it doesn’t do anything.

I tried typing in their whole address and using the reading command but it just says envelopes and labels.

Any suggestions on how I can fix this problem.

Thanks in advance.

Kate Walsh  


Re: Links Inquiry

chris judge
 

Also, internet explorer might be your issue. I’d suggest trying chrome or fire fox.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Justin Williams
Sent: June 20, 2019 5:57 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Links Inquiry

 

Root jaws to pc, and double click.

You can also try it without the virtual cursor on.

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Glenn / Lenny
Sent: Thursday, June 20, 2019 4:40 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Links Inquiry

 

Which browser are you using when this happens?

Have you tried insert + F7 to list the links?

HTH.

Glenn

 

Sent: Thursday, June 20, 2019 3:33 PM

Subject: [jaws-users] Links Inquiry

 

Afternoon all.

 

Using Jaws 2018 and Windows 10 on a Dell laptop, I need some information on an issue with website links.

 

I am trying to do some online research, and one of the links I am attempting to open says “link World War 2 on mouse over”. I have tried opening it with the spacebar, pressing enter, and the applications (shift f10) keys. None work. Can anyone answer this issue and offer a workaround? Thanks.

 

Jerry


Re: Filling out an envelope

Ron Kolesar
 

Hey Judy, long time no talk or see, from Ron Kolesar Ham Radio Station KR3DOG-PA-WCECTM
I have a HP all in one printer.
When I insert a envelope, which is almost never these days when ever possible first.
I try to use a persons and or company’s e-mail address.
But do you place the envelope in length ways and if so, with the flap side up and or down and to the let and or to the right?
Also, or do you place it with ways where the flap is going across instead of up and down?
And the above questions apply to if the envelope is in length ways or with ways.
Very Thankfully yours, A lost friend Ron Kolesar Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County emergency Com-Tree Manager.
 

From: Judy Jones
Sent: Thursday, June 20, 2019 18:08
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope
 

Not unlike using a typewriter the way we used to back in the day.  I remember the spacing learned back then.

 

Judy

“Embrace the day with its mercies and blessings.”

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Rebecca Lineberger
Sent: Thursday, June 20, 2019 2:09 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

I have Word 2010, not 2016, so I don’t know if this will work for you. 

If I want to print an envelope, I find it easiest to type the information in a blank document.  The return address goes at the top, not indented, then the delivery address several lines below, again not indented.

When I go to the mailings tab and then to envelopes, everything is already filled in, in the proper places.  I have the envelope inserted into the printer and all I have to do is tab until I get to print.  Some printers have an actual physical button to press to start the printer and sometimes there’s a continue button on the screen which you may have to alt-tab to.  Someone may have to show you the first time just to make sure the envelope is inserted as it should be and to make sure it printed properly.   

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Judy Jones
Sent: Thursday, June 20, 2019 3:43 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

I have found Microsoft doesn’t play nice with their mailings tab, and stick with Avery all the way.

 

Judy

“Embrace the day with its mercies and blessings.”

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Kate Walsh
Sent: Thursday, June 20, 2019 12:14 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Filling out an envelope

 

Hi All,

I am using JAWS 2019 with the latest version, office 2016 and windows 10.

When I go to fill out an envelope, I pulled up a word document and than pressed alt plus m for the mailings tab than e for envelopes.

It says divelery address so I typed in the persons name and than pressed enter to type in the address but it doesn’t do anything.

I tried typing in their whole address and using the reading command but it just says envelopes and labels.

Any suggestions on how I can fix this problem.

Thanks in advance.

Kate Walsh 

In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


Re: Question About Wlm

Ron Kolesar
 

Do the following.
1. got to the letter that you want to move.
2. tap your application key which on a normal keyboard is the very first button on the lower write of your normal keyboard.
If you fine the long zero button on your calculator keypad, follow it to the left until you get to the normal keyboard, it will be the very first button you come to.
3. Tap the app key until you come to move to folder, or you can simply tap the letter v which is the short cut.
That’s just the letter V by itself with no additional keys.
4. up or down arrow until you fine the mailbox you want to place it in.
5. tab over to the ok button and abuse either enter key and or the spacebar and you just moved that letter from one mailbox to the new mailbox.
6. If you want to move more than one letter to the same mailbox,
You don’t have to go looking for the mailbox since it knows where you were at the last time you moved a letter.
Unless you tap your up and or down arrow keys.
Simply tab over to the ok button or if I remember correctly at any time you can skip the ok button but simply just abusing either of the enter keys and or the spacebar.
Hope this advice was helpful.
Ron Kolesar U.S. Ham Radio Operator KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager.
 

From: Robert Ringwald
Sent: Thursday, June 20, 2019 14:15
To: Jaws
Subject: [jaws-users] Question About Wlm
 
Has anyone had this problem?
 
        Windows 10
Latest Jaws
WLM 12
 
In order to move email from in folder to another folder, I use ctrl shift V.
 
There is then the list of folders. A sighted person can see the list, but Jaws does not read the list. Any ideas?
 
Bob Ringwald
Amateur (ham) radio station K6YBV
www.ringwald.com
Go Dodgers
In the good old days of Morse code Shorthand, 73's AKA Best Regards and or Best Whishes,
From Ron U.S. Ham Radio Station KR3DOG-PA-WCECTM
Pennsylvania West County Emergency Com-Tree Manager


JAWS Shutdown Sound

Gerald Levy
 

One of the most annoying things about running Windows 10 is that there is no shutdown sound to indicate that your computer has shut down like in previous versions of Windows.?? The only reliable way to determine for sure that your computer has shut down completely is to listen for the internal cooling fan to stop spinning, which is not always possible, especially with a laptop whose internal fan may emit little or no noise.?? But the next best thing would be to have JAWS issue a shutdown sound whenever you close it manually or you shut down your computer.?? Is there any way to assign a shutdown sound to JAWS??? That other unmentionable screen reader has a shutdown sound, so I don't see any reason why JAWS couldn't have one, also.


Gerald


Re: task Scheduler viewing

Glenn / Lenny
 

Hi Victor,
If you tap the windows key and start typing in task scheduler, it will bring it up.
I'm wondering if your virus scanner is running, like security essentials, or defender, if you are running win 10.
Glenn

Sent: Thursday, June 20, 2019 7:25 PM
Subject: [jaws-users] task Scheduler viewing

Hi All,
 
For some odd reason, my computer gets completely slow starting around the 10:00 and 11:00 pm mark, where Jaws freezes up, and, it seems like my computer slows to the point of stopping for several seconds, like something’s happening in the background.
 
While I know there’s a way to view scheduled tasks with the task scheduler through Windows, but is there a utility, or something where I can get just a list of the various tasks scheduled to run at any given moment.
 
I don’t mean the task manager, as that tells me nothing, and the Windows Task Scheduler has too many branches to go into to reliably see what is scheduled to run and what isn’t.
 
Does such a utility exist, or do I have to suffer around that time?
 
Any help would be appreciated.
 
Victor


Re: Filling out an envelope

Glenn / Lenny
 

I would say that with the built-in margins, you would not want to go down at all.
 

Sent: Thursday, June 20, 2019 9:27 PM
Subject: Re: [jaws-users] Filling out an envelope

How far do you have to go down between the pieces of info on the page?

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Rebecca Lineberger
Sent: Thursday, June 20, 2019 8:57 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

If you’ve told Word what size envelope you have, Word will put the addresses where they need to go.  Writing the addresses in a blank document—no indentation necessary—is just a way to have Word fill in the edit fields for you.  You can always fill in the fields yourself from the mailings/envelopes tab.  Again, I just type in the addresses, no indentation required, since Word has a template for the envelope size you’ve selected.

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Glenn / Lenny
Sent: Thursday, June 20, 2019 6:06 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

How far do you indent for business size versus a small envelope?

Thanks

 

 

Sent: Thursday, June 20, 2019 4:08 PM

Subject: Re: [jaws-users] Filling out an envelope

 

I have Word 2010, not 2016, so I don’t know if this will work for you. 

If I want to print an envelope, I find it easiest to type the information in a blank document.  The return address goes at the top, not indented, then the delivery address several lines below, again not indented.

When I go to the mailings tab and then to envelopes, everything is already filled in, in the proper places.  I have the envelope inserted into the printer and all I have to do is tab until I get to print.  Some printers have an actual physical button to press to start the printer and sometimes there’s a continue button on the screen which you may have to alt-tab to.  Someone may have to show you the first time just to make sure the envelope is inserted as it should be and to make sure it printed properly.    

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Judy Jones
Sent: Thursday, June 20, 2019 3:43 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

I have found Microsoft doesn’t play nice with their mailings tab, and stick with Avery all the way.

 

Judy

“Embrace the day with its mercies and blessings.”

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Kate Walsh
Sent: Thursday, June 20, 2019 12:14 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Filling out an envelope

 

Hi All,

I am using JAWS 2019 with the latest version, office 2016 and windows 10.

When I go to fill out an envelope, I pulled up a word document and than pressed alt plus m for the mailings tab than e for envelopes.

It says divelery address so I typed in the persons name and than pressed enter to type in the address but it doesn’t do anything.

I tried typing in their whole address and using the reading command but it just says envelopes and labels.

Any suggestions on how I can fix this problem.

Thanks in advance.

Kate Walsh  


Re: Filling out an envelope

Justin Williams
 

How far do you have to go down between the pieces of info on the page?

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Rebecca Lineberger
Sent: Thursday, June 20, 2019 8:57 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

If you’ve told Word what size envelope you have, Word will put the addresses where they need to go.  Writing the addresses in a blank document—no indentation necessary—is just a way to have Word fill in the edit fields for you.  You can always fill in the fields yourself from the mailings/envelopes tab.  Again, I just type in the addresses, no indentation required, since Word has a template for the envelope size you’ve selected.

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Glenn / Lenny
Sent: Thursday, June 20, 2019 6:06 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

How far do you indent for business size versus a small envelope?

Thanks

 

 

Sent: Thursday, June 20, 2019 4:08 PM

Subject: Re: [jaws-users] Filling out an envelope

 

I have Word 2010, not 2016, so I don’t know if this will work for you. 

If I want to print an envelope, I find it easiest to type the information in a blank document.  The return address goes at the top, not indented, then the delivery address several lines below, again not indented.

When I go to the mailings tab and then to envelopes, everything is already filled in, in the proper places.  I have the envelope inserted into the printer and all I have to do is tab until I get to print.  Some printers have an actual physical button to press to start the printer and sometimes there’s a continue button on the screen which you may have to alt-tab to.  Someone may have to show you the first time just to make sure the envelope is inserted as it should be and to make sure it printed properly.    

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Judy Jones
Sent: Thursday, June 20, 2019 3:43 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

I have found Microsoft doesn’t play nice with their mailings tab, and stick with Avery all the way.

 

Judy

“Embrace the day with its mercies and blessings.”

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Kate Walsh
Sent: Thursday, June 20, 2019 12:14 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Filling out an envelope

 

Hi All,

I am using JAWS 2019 with the latest version, office 2016 and windows 10.

When I go to fill out an envelope, I pulled up a word document and than pressed alt plus m for the mailings tab than e for envelopes.

It says divelery address so I typed in the persons name and than pressed enter to type in the address but it doesn’t do anything.

I tried typing in their whole address and using the reading command but it just says envelopes and labels.

Any suggestions on how I can fix this problem.

Thanks in advance.

Kate Walsh  


google drive

Justin Williams
 

Does google drive work with google chrome? The version of firefox is doen't
seem to work that well for anything.


Re: Filling out an envelope

Rebecca Lineberger
 

If you’ve told Word what size envelope you have, Word will put the addresses where they need to go.  Writing the addresses in a blank document—no indentation necessary—is just a way to have Word fill in the edit fields for you.  You can always fill in the fields yourself from the mailings/envelopes tab.  Again, I just type in the addresses, no indentation required, since Word has a template for the envelope size you’ve selected.

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Glenn / Lenny
Sent: Thursday, June 20, 2019 6:06 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

How far do you indent for business size versus a small envelope?

Thanks

 

 

Sent: Thursday, June 20, 2019 4:08 PM

Subject: Re: [jaws-users] Filling out an envelope

 

I have Word 2010, not 2016, so I don’t know if this will work for you. 

If I want to print an envelope, I find it easiest to type the information in a blank document.  The return address goes at the top, not indented, then the delivery address several lines below, again not indented.

When I go to the mailings tab and then to envelopes, everything is already filled in, in the proper places.  I have the envelope inserted into the printer and all I have to do is tab until I get to print.  Some printers have an actual physical button to press to start the printer and sometimes there’s a continue button on the screen which you may have to alt-tab to.  Someone may have to show you the first time just to make sure the envelope is inserted as it should be and to make sure it printed properly.    

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Judy Jones
Sent: Thursday, June 20, 2019 3:43 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

I have found Microsoft doesn’t play nice with their mailings tab, and stick with Avery all the way.

 

Judy

“Embrace the day with its mercies and blessings.”

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Kate Walsh
Sent: Thursday, June 20, 2019 12:14 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Filling out an envelope

 

Hi All,

I am using JAWS 2019 with the latest version, office 2016 and windows 10.

When I go to fill out an envelope, I pulled up a word document and than pressed alt plus m for the mailings tab than e for envelopes.

It says divelery address so I typed in the persons name and than pressed enter to type in the address but it doesn’t do anything.

I tried typing in their whole address and using the reading command but it just says envelopes and labels.

Any suggestions on how I can fix this problem.

Thanks in advance.

Kate Walsh  


task Scheduler viewing

Victor Gouveia <victor.gouveia@...>
 

Hi All,
 
For some odd reason, my computer gets completely slow starting around the 10:00 and 11:00 pm mark, where Jaws freezes up, and, it seems like my computer slows to the point of stopping for several seconds, like something’s happening in the background.
 
While I know there’s a way to view scheduled tasks with the task scheduler through Windows, but is there a utility, or something where I can get just a list of the various tasks scheduled to run at any given moment.
 
I don’t mean the task manager, as that tells me nothing, and the Windows Task Scheduler has too many branches to go into to reliably see what is scheduled to run and what isn’t.
 
Does such a utility exist, or do I have to suffer around that time?
 
Any help would be appreciated.
 
Victor


Re: Links Inquiry

JERRY MARTIN
 

Larry:
 
I use IE 11, and the suggestion provided from Adrian worked great. It is
 
when on the specific link, press control jawskey enter (the last two keys are on the numpad). Then listen to what jaws says. Hope this help, as it helped me.
 
 

From: Larry Volk
Sent: Thursday, June 20, 2019 5:57 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Links Inquiry
 

Which browser are you using? There is a website I use all the time and I have this same issue but I switched back to IE and problem resolved.

 

Larry

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of jyandt.martin@...
Sent: June 20, 2019 2:34 PM
To: jaws-users-list
Subject: [jaws-users] Links Inquiry

 

Afternoon all.

 

Using Jaws 2018 and Windows 10 on a Dell laptop, I need some information on an issue with website links.

 

I am trying to do some online research, and one of the links I am attempting to open says “link World War 2 on mouse over”. I have tried opening it with the spacebar, pressing enter, and the applications (shift f10) keys. None work. Can anyone answer this issue and offer a workaround? Thanks.

 

Jerry


Re: Links Inquiry

Larry Volk
 

Which browser are you using? There is a website I use all the time and I have this same issue but I switched back to IE and problem resolved.

 

Larry

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of jyandt.martin@...
Sent: June 20, 2019 2:34 PM
To: jaws-users-list
Subject: [jaws-users] Links Inquiry

 

Afternoon all.

 

Using Jaws 2018 and Windows 10 on a Dell laptop, I need some information on an issue with website links.

 

I am trying to do some online research, and one of the links I am attempting to open says “link World War 2 on mouse over”. I have tried opening it with the spacebar, pressing enter, and the applications (shift f10) keys. None work. Can anyone answer this issue and offer a workaround? Thanks.

 

Jerry


Re: Links Inquiry

JERRY MARTIN
 

Thanks very much. That did the trick.
 
 

From: Adrian Spratt
Sent: Thursday, June 20, 2019 4:30 PM
To: jaws-users-list@groups.io
Subject: FW: [jaws-users] Links Inquiry
 

Sorry, I had the right keys in my head but wrote down the wrong ones. Here are the three keys to press together on a mouseover link:

Control-JAWS key-numpad enter

 

From: Adrian Spratt
Sent: Thursday, June 20, 2019 5:26 PM
To: 'jaws-users-list@groups.io' <jaws-users-list@groups.io>
Subject: RE: [jaws-users] Links Inquiry

 

For a mouseover link, press control-numpad enter and the PC cursor key, all at the same time. Listen carefully for what JAWS says after you release the keys.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of jyandt.martin@...
Sent: Thursday, June 20, 2019 4:34 PM
To: jaws-users-list <jaws-users-list@groups.io>
Subject: [jaws-users] Links Inquiry

 

Afternoon all.

 

Using Jaws 2018 and Windows 10 on a Dell laptop, I need some information on an issue with website links.

 

I am trying to do some online research, and one of the links I am attempting to open says “link World War 2 on mouse over”. I have tried opening it with the spacebar, pressing enter, and the applications (shift f10) keys. None work. Can anyone answer this issue and offer a workaround? Thanks.

 

Jerry


Re: Filling out an envelope

Judy Jones <sonshines59@...>
 

Not unlike using a typewriter the way we used to back in the day.  I remember the spacing learned back then.

 

Judy

“Embrace the day with its mercies and blessings.”

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Rebecca Lineberger
Sent: Thursday, June 20, 2019 2:09 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

I have Word 2010, not 2016, so I don’t know if this will work for you. 

If I want to print an envelope, I find it easiest to type the information in a blank document.  The return address goes at the top, not indented, then the delivery address several lines below, again not indented.

When I go to the mailings tab and then to envelopes, everything is already filled in, in the proper places.  I have the envelope inserted into the printer and all I have to do is tab until I get to print.  Some printers have an actual physical button to press to start the printer and sometimes there’s a continue button on the screen which you may have to alt-tab to.  Someone may have to show you the first time just to make sure the envelope is inserted as it should be and to make sure it printed properly.    

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Judy Jones
Sent: Thursday, June 20, 2019 3:43 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

I have found Microsoft doesn’t play nice with their mailings tab, and stick with Avery all the way.

 

Judy

“Embrace the day with its mercies and blessings.”

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Kate Walsh
Sent: Thursday, June 20, 2019 12:14 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Filling out an envelope

 

Hi All,

I am using JAWS 2019 with the latest version, office 2016 and windows 10.

When I go to fill out an envelope, I pulled up a word document and than pressed alt plus m for the mailings tab than e for envelopes.

It says divelery address so I typed in the persons name and than pressed enter to type in the address but it doesn’t do anything.

I tried typing in their whole address and using the reading command but it just says envelopes and labels.

Any suggestions on how I can fix this problem.

Thanks in advance.

Kate Walsh  


Re: Filling out an envelope

Glenn / Lenny
 

How far do you indent for business size versus a small envelope?
Thanks
 

Sent: Thursday, June 20, 2019 4:08 PM
Subject: Re: [jaws-users] Filling out an envelope

I have Word 2010, not 2016, so I don’t know if this will work for you. 

If I want to print an envelope, I find it easiest to type the information in a blank document.  The return address goes at the top, not indented, then the delivery address several lines below, again not indented.

When I go to the mailings tab and then to envelopes, everything is already filled in, in the proper places.  I have the envelope inserted into the printer and all I have to do is tab until I get to print.  Some printers have an actual physical button to press to start the printer and sometimes there’s a continue button on the screen which you may have to alt-tab to.  Someone may have to show you the first time just to make sure the envelope is inserted as it should be and to make sure it printed properly.    

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Judy Jones
Sent: Thursday, June 20, 2019 3:43 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] Filling out an envelope

 

I have found Microsoft doesn’t play nice with their mailings tab, and stick with Avery all the way.

 

Judy

“Embrace the day with its mercies and blessings.”

 

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Kate Walsh
Sent: Thursday, June 20, 2019 12:14 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Filling out an envelope

 

Hi All,

I am using JAWS 2019 with the latest version, office 2016 and windows 10.

When I go to fill out an envelope, I pulled up a word document and than pressed alt plus m for the mailings tab than e for envelopes.

It says divelery address so I typed in the persons name and than pressed enter to type in the address but it doesn’t do anything.

I tried typing in their whole address and using the reading command but it just says envelopes and labels.

Any suggestions on how I can fix this problem.

Thanks in advance.

Kate Walsh  


FW: [jaws-users] Links Inquiry

Adrian Spratt
 

Sorry, I had the right keys in my head but wrote down the wrong ones. Here are the three keys to press together on a mouseover link:

Control-JAWS key-numpad enter

 

From: Adrian Spratt
Sent: Thursday, June 20, 2019 5:26 PM
To: 'jaws-users-list@groups.io' <jaws-users-list@groups.io>
Subject: RE: [jaws-users] Links Inquiry

 

For a mouseover link, press control-numpad enter and the PC cursor key, all at the same time. Listen carefully for what JAWS says after you release the keys.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of jyandt.martin@...
Sent: Thursday, June 20, 2019 4:34 PM
To: jaws-users-list <jaws-users-list@groups.io>
Subject: [jaws-users] Links Inquiry

 

Afternoon all.

 

Using Jaws 2018 and Windows 10 on a Dell laptop, I need some information on an issue with website links.

 

I am trying to do some online research, and one of the links I am attempting to open says “link World War 2 on mouse over”. I have tried opening it with the spacebar, pressing enter, and the applications (shift f10) keys. None work. Can anyone answer this issue and offer a workaround? Thanks.

 

Jerry

1961 - 1980 of 13767