1. jaws-users-list@groups.io
  2. Messages
   Date   
Re: Skipping through paragraphs

Justin Williams
 

 Control down arrow will do so. 

On Fri, May 17, 2019 at 8:17 PM wayne smith <waynesoundsmith@...> wrote:
Hello- I am using Windows 7 with MS Word2007 andJAWS 2018. I want to skip from paragraph to paragraph in the Word doc. Is there a command for doing this?

Thanks in advance, Wayne
Skipping through paragraphs

wayne smith
 

Hello- I am using Windows 7 with MS Word2007 andJAWS 2018. I want to skip from paragraph to paragraph in the Word doc. Is there a command for doing this?

Thanks in advance, Wayne
Re: Reading Adobe Files

Melissa Hambleton
 

I'm not sure if this will be the fix or not but quite a few people had the same problem not so long ago as well as myself.

In Adobe go to preferences and then look for security enhanced. Then there should be a check box that will say something like start protected mode at start up. You will want to make sure the check box is not checked. Then go to OK or whatever it is so it will accept.

You may need to close Adobe after that and reopen it ...I can't remember.

Melissa

-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of lynn white
Sent: Friday, May 17, 2019 6:45 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] Reading Adobe Files

I have the latest update of Jaws and suddenly can't read Adobe files when I open them. Is there something in Jaws that will allow these files to be read? Thanks.
Reading Adobe Files

lynn white
 

I have the latest update of Jaws and suddenly can't read Adobe files when I open them.  Is there something in Jaws that will allow these files to be read?  Thanks.
Re: latest CCleaner

Mike B <mb69mach1@...>
 

Yo Kimsan,
 
As Dan and Emile said, if you press, Alt + C, you can tab to both the, Windows and Applications, cleaning options.  After you tab and highlight the, Windows option, tab to, Run CCleaner and press the spacebar or the keystroke, Alt + R.  After the Windows option finishes you can Shift + Tab back to the Windows option and right arrow to the, Applications option, tab to Run CCleaner and press spacebar or Alt + R.  To activate the Registry cleaner option press, Alt + G, and press, Alt + S, to start the scan.  When the registry scan completes Shift + Tab to the list of items found, then press, Control + A, to select all if you want to delete all.  Now tab to, Fix selected issues, and press the spacebar.  A dialogue will pop-up asking if you want to backup the registry before cleaning, so press the spacebar on the, Yes, button and press, Alt + S, to save a backup of the registry.  Now tab a couple of times to, Fix all selected issues, and pres the spacebar.  When this finishes you'll hear, Checkbox not checked, now route the Jaws cursor to the PC cursor, up arrow 1 time and you'll hear a couple of numbers like, 40 / 40.  This means that 40 issues were found and 40 issues were fixed removed.
Note:  When CCleaner makes the registry backup copy, it is save in your Documents or My Documents folder.
 
 

Take care.  Mike.  Sent from my iBarstool.  Go Dodgers!
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----
Sent: Friday, May 17, 2019 12:29 PM
Subject: Re: [jaws-users] latest CCleaner

After opening Ccleaner if you get to the custom clean button and activate it, it will look more like the older version.  The new home screen is definitely not very accessible.

 

HTH

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Kimsan via Groups.Io
Sent: Friday, May 17, 2019 11:57 AM
To: 'jaws' <jaws-users-list@groups.io>
Subject: [jaws-users] latest CCleaner

 

Hi,

I installed the latest CCleaner, does anyone have any idea how to use it?

I’m not finding the windows or applications tab, even if I use the touch cursor.

The version ends in 7182. I downloaded the slim version, too.

 

Thankyou,

Sincerely,

Kimsan Song

kimsansong@...

 
Re: looking for two Excel keystrokes -- if they exist

Mike B <mb69mach1@...>
 

Hi All,
 
Here are steps on how to customize the Status Bar with Word or Excel:
To show number of lines, line number, or many other options  in the status bar in Word try the following:
1. Press F6 until Status bar is highlighted.  Or, until you hear Jaws report, Status Toolbar.  It should be the 2nd press of the F6 key.
2. Press Shift + F10 to show options.  This keystroke must be used because a right mouse click or pressing the application key will not.
3. Down arrow through the available options, and when you have found line count or something else of interest press the spacebar to check or uncheck
the item.
4. when done making modifications simply press AltF4 or escape key.
5. Review your status line to insure the settings have been properly modified.
 
Joseph the free tech guy!

Take care.  Mike.  Sent from my iBarstool.  Go Dodgers!
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----
From: Brian Lee
Sent: Friday, May 17, 2019 1:10 PM
Subject: Re: [jaws-users] looking for two Excel keystrokes -- if they exist

Hello Ann,

I am using JAWS 2019 and Excel 2013.  Both average and sum of selected cells
are shown on the status bar and reported by JAWS when I read the status bar.
Both those items are shown in the status bar contextual menu but need to be
checked.  I thought I would mention this to you as I am using JAWS 2019 and
those items are reported.  I am not sure about the later versions of Excel.


Take care.   

 Brian Lee
brianllee@...

-----Original Message-----
From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf
Of Ann Byrne
Sent: May 16, 2019 4:25 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] looking for two Excel keystrokes -- if they exist

Unfortunately, JAWS2019 does not report average and sum with
insert+3.  JAWS2018 does.  I have reported this to FS.
At 12:23 PM 5/16/2019, you wrote:
>Hello Robin,
>
>If you are only using arrow keys then you are not selecting but simply
>navigating.  If you select by using the shift key with arrow keys or by
>using other selecting keystrokes then the status bar should give you
>the count.  When you select the cells the status bar gives other things
>like the average and sum of the selected range of cells along with the
>number of cells selected.  If this isn't happening then use F6 to go to
>the status bar, press either the application key of shift with F10, and
>use down arrow to the "Count"
>item and see if it is checked.  If it isn't checked then use enter key
>to add it to the status bar.  If it is checked then just escape out of
>the menu and use F6 to go back to the worksheet.  The items in the menu
>include one for "Count" and one for "numeric count."  The "Numeric
>count" gives the number of cells that contain only numbers and the
>"Count" should give the actual number for the cells you select.
>
>You can use JAWS key with C to get the cell coordinates.  JAWS key with
>tab should give you the name of the worksheet, the contents of the
>current cell and the cell coordinates.
>
>Take care.
>
>Brian Lee
>brianllee@...
>
>From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io]
>On Behalf Of Van Lant, Robin via Groups.Io
>Sent: May 14, 2019 3:15 PM
>To: jaws-users-list@groups.io
>Subject: [jaws-users] looking for two Excel keystrokes -- if they exist
>
>There are two things I miss from using Window Eyes with Excel.  I'm
>wondering if an equivalent exists in JAWS.
>
>First, Is there a way, other than to arrow away and back, to have JAWS
>announce the current cell coordinates?  This is particularly helpful
>when in the middle of typing a formula and I need to recall the current
>cell I'm in.
>
>Second, I sometimes need to count a subset of rows or columns in a
>file.  For example, today I was looking at a list of all employees and
>I just needed to count out the number in a particular team.  With
>Window Eyes, I would start at the first cell and arrow down till the
>last one.  By default, Window Eyes would announce the number of columns
>or cells selected, depending on which way I was moving.  Is there some
>way to ask JAWS how many rows, columns or cells are currently
>highlighted?  I tried reading the status line, but that didn't' seem to
>work.
>
>Using JAWS 2019 latest build with Windows 10 and Excel 2016.
>
>
>Robin Van Lant, Sr. Program Manager, Strategy & Performance Management
>Key Equipment Finance | 720-304-1060
>|  <http://www.keyequipmentfinance.com/>www.keyequipmentfinance.com
>
>
>
>This communication may contain privileged and/or confidential
>information. It is intended solely for the use of the addressee. If you
>are not the intended recipient, you are strictly prohibited from
>disclosing, copying, distributing or using any of this information.
>If you received this communication in error, please contact the sender
>immediately and destroy the material in its entirety, whether
>electronic or hard copy. This communication may contain nonpublic
>personal information about consumers subject to the restrictions of the
>Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
>redisclose such information for any purpose other than to provide the
>services for which you are receiving the information.
>
>127 Public Square, Cleveland, OH 44114
>
>
>If you prefer not to receive future e-mail offers for products or
>services from Key send an e-mail to
><mailto:DNERequests@...>mailto:DNERequests@... with 'No
>Promotional E-mails' in the SUBJECT line.
>
Re: weird problem with Outlook 2019 and JAWS

JOHN RIEHL
 

How do I check to see if my view is set to list in Outlook?

Thanks.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Friday, May 17, 2019 11:24 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] weird problem with Outlook 2019 and JAWS

 

Hello,

I’m still on Outlook 2016, but the attachment menu is the same.  Once you hit space or enter on the Attach button, arrow up once to get directly to that Browse this PC option and hit enter to open that dialog.  I’m not getting the behavior in that dialog that you are getting, although I know I’ve seen that on accasion other places in Office.  It may be that you need to check that your View is set to list. It may also be a JAWS verbosity thing, but it’s hard for me to test, since I don’t have that issue.

 

I’ll also recommend a different approach for attaching files.  My favorite way to attach files is this:  

  • Via Windows Explorer, open the folder where your file is on your computer.  Many of mine are in My Documents, for which I have a desktop icon, so it’s really fast to get this open.
  • Find the file or files you want and hit control C to copy.
  • Go to an open message in Outlook and navigate to the body of the message.
  • Hit Control V.  The attachment(s) will be added  You can hit Insert A to confirm.

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of JOHN RIEHL via Groups.Io
Sent: Thursday, May 16, 2019 2:32 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] weird problem with Outlook 2019 and JAWS

 

Hi. I’m having a weird problem with Outlook 2019 and JAWS. When I go into an e-mail message and go to Insert (to insert a file, then tab over to attach file and press enter, I’m presented with a list of recent documents, as opposed to the expected behavior, which is being placed in the My documents directory. The Browse inside my computer, which does give this behavior, is at the bottom of a list of documents. This is highly annoying.

Also, when I’m in the list of documents, Jaws keeps saying “document grid”, which don’t remember hearing previously. What’s going on and how can I fix these annoying behaviors?

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.
Re: looking for two Excel keystrokes -- if they exist

Brian Lee
 

Hello Ann,

I am using JAWS 2019 and Excel 2013. Both average and sum of selected cells
are shown on the status bar and reported by JAWS when I read the status bar.
Both those items are shown in the status bar contextual menu but need to be
checked. I thought I would mention this to you as I am using JAWS 2019 and
those items are reported. I am not sure about the later versions of Excel.


Take care.

Brian Lee
brianllee@...

-----Original Message-----
From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf
Of Ann Byrne
Sent: May 16, 2019 4:25 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] looking for two Excel keystrokes -- if they exist

Unfortunately, JAWS2019 does not report average and sum with
insert+3. JAWS2018 does. I have reported this to FS.
At 12:23 PM 5/16/2019, you wrote:
Hello Robin,

If you are only using arrow keys then you are not selecting but simply
navigating. If you select by using the shift key with arrow keys or by
using other selecting keystrokes then the status bar should give you
the count. When you select the cells the status bar gives other things
like the average and sum of the selected range of cells along with the
number of cells selected. If this isn't happening then use F6 to go to
the status bar, press either the application key of shift with F10, and
use down arrow to the "Count"
item and see if it is checked. If it isn't checked then use enter key
to add it to the status bar. If it is checked then just escape out of
the menu and use F6 to go back to the worksheet. The items in the menu
include one for "Count" and one for "numeric count." The "Numeric
count" gives the number of cells that contain only numbers and the
"Count" should give the actual number for the cells you select.

You can use JAWS key with C to get the cell coordinates. JAWS key with
tab should give you the name of the worksheet, the contents of the
current cell and the cell coordinates.

Take care.

Brian Lee
brianllee@...

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io]
On Behalf Of Van Lant, Robin via Groups.Io
Sent: May 14, 2019 3:15 PM
To: jaws-users-list@groups.io
Subject: [jaws-users] looking for two Excel keystrokes -- if they exist

There are two things I miss from using Window Eyes with Excel. I'm
wondering if an equivalent exists in JAWS.

First, Is there a way, other than to arrow away and back, to have JAWS
announce the current cell coordinates? This is particularly helpful
when in the middle of typing a formula and I need to recall the current
cell I'm in.

Second, I sometimes need to count a subset of rows or columns in a
file. For example, today I was looking at a list of all employees and
I just needed to count out the number in a particular team. With
Window Eyes, I would start at the first cell and arrow down till the
last one. By default, Window Eyes would announce the number of columns
or cells selected, depending on which way I was moving. Is there some
way to ask JAWS how many rows, columns or cells are currently
highlighted? I tried reading the status line, but that didn't' seem to
work.

Using JAWS 2019 latest build with Windows 10 and Excel 2016.


Robin Van Lant, Sr. Program Manager, Strategy & Performance Management
Key Equipment Finance | 720-304-1060
| <http://www.keyequipmentfinance.com/>www.keyequipmentfinance.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information.
If you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether
electronic or hard copy. This communication may contain nonpublic
personal information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or
services from Key send an e-mail to
<mailto:DNERequests@...>mailto:DNERequests@... with 'No
Promotional E-mails' in the SUBJECT line.
auto read on web pages

Glenn / Lenny
 

Hi,
I'm pretty sure that Jaws can be set to not read through a web page when it opens.
I've been always meaning to turn this off, but I usually get distracted and never look into it.
I hate it when I'm waiting for a page to open and I go do something while waiting, like doing something across the room, and it will come up and I have to run back and hit the control key.
I always like to start at the top of a page anyway.
If anyone knows the route to this setting, it will save me some digging.
Thanks.
Glenn
 
 
Sent From My Tabletop
N0YJV   shade tree computer guy
Re: someone on Long Island to help with Jaws?

Mr. Ed
 

Hi Miriam,
Did you try calling your state Services for the Blind and see if they know
of someone you can pay to assist you. I know each state has Services for the
Blind.
Mr. Ed

-----Original Message-----
From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf
Of Miriam Vieni
Sent: Thursday, May 16, 2019 5:32 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] someone on Long Island to help with Jaws?

Yes, there are two people who have helped me remotely and they're great. But
I think that for some of the things I need, and given my situation, right
now I need someone who can come here. I'm having hearing issues. Just got a
hearing aid that I'm getting accustomed to and I'm mobility impaired and
there aren't always sighted people here.

Miriam

-----Original Message-----
From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of
James Malone
Sent: Thursday, May 16, 2019 5:57 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] someone on Long Island to help with Jaws?

Can you have someone remote in as well?

-----Original Message-----
From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf
Of Miriam Vieni
Sent: Thursday, May 16, 2019 10:18 AM
To: jaws users list <jaws-users-list@groups.io>
Subject: [jaws-users] someone on Long Island to help with Jaws?

I'm looking for someone who lives on Long Island and knows Jaws, who can
travel to my home in South Huntington to fix some things for me. Does anyone
have any suggestions?
Also, one of the problems is that Jaws isn't reading word documents
accurately.

Miriam
Re: latest CCleaner

Dan Kerstetter
 

After opening Ccleaner if you get to the custom clean button and activate it, it will look more like the older version.  The new home screen is definitely not very accessible.

 

HTH

 

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Kimsan via Groups.Io
Sent: Friday, May 17, 2019 11:57 AM
To: 'jaws' <jaws-users-list@groups.io>
Subject: [jaws-users] latest CCleaner

 

Hi,

I installed the latest CCleaner, does anyone have any idea how to use it?

I’m not finding the windows or applications tab, even if I use the touch cursor.

The version ends in 7182. I downloaded the slim version, too.

 

Thankyou,

Sincerely,

Kimsan Song

kimsansong@...

 
Pontes Media Downloader was RE: [jaws-users] converting MP3

Alan Lemly
 

Dean Martineau's Flying Blind email yesterday mentioned the Pontes Media Downloader for extracting audio from other file formats and had a link to the following site where Pontes and its accessibility is discussed:

 

https://webfriendlyhelp.com/ponts-media-downloader-convert-online-videos-with-ease/

 

be aware that the above site has Pontes misspelled as it omits the e preceding the ending s. I could not find a download link at the above site which is needed as Pontes is a separate program that must be installed on your computer in order to use it. I personally prefer this as I'm finding websites I previously used to extract mp3 from youtube videos no longer seem to work for me. I located the following website where the latest version of the Pontes Media Downloader can be obtained:

 

http://www.pontes.ro/en/scripts/#pmd

 

I downloaded version 3 of Pontes from the above link and installed it without issue on my Windows 7 computer. I then went to youtube.com and did a search on Kacey Musgraves and opened a mix of hers which was the first youtube search result. I had Pontes running on my computer and noted that the URL for the Kacey Musgraves youtube mix which I had copied to my clipboard was already loaded into Pontes and when I executed its Download button, all the audio tied to that URL began extracting in mp3 format to the default Pontes Media Downloader folder under Documents on my computer. I was surprised that there were quite a number but was impressed that Pontes issued a nice tone each time a file was converted and JAWS announced when the process was complete. According to Windows Explorer, I got 85 mp3 song files in the Kacey Musgraves Mix subfolder of my Pontes Media Downloader foler under Documents. I sampled many of these and the quality seemed very good. It took more than a few seconds for the conversion to complete but based on the number being processed, I was very pleased with the timing.

 

Pontes seems like a most accessible and effective alternative for extracting audio from other file formats. I've just used it the one time but I encourage others to try it and report back if it works well for you.

 

Alan Lemly

 

From: jaws-users-list@groups.io [mailto:jaws-users-list@groups.io] On Behalf Of Debbie April Yuille
Sent: Friday, May 17, 2019 2:32 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] converting MP3

 

Hi Mitchell

 

Is it the Youtube to MP3 Converter from Media Human. I’ve tried it and it’s not at all accessible with JAWS. In fact I’ve not even able to find any menus.

Any advices is greatly appreciated.

 

Debbie

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Mitchell via Groups.Io
Sent: Thursday, 16 May 2019 4:05 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] converting MP3

 

No the program is 100% accessible email me if you need any assistance with it


On May 15, 2019, at 10:58 AM, Steve <hamsteve64@...> wrote:

Looks interesting, I am just going to start exploring it.

 

Are there any needed changes to make it work well with Jaws?

 

----- Original Message -----

Sent: Tuesday, May 14, 2019 11:04 PM

Subject: Re: [jaws-users] converting MP3

 


There’s a better audio converter it’s called media human if you go to media human.com you’ll find it


On May 14, 2019, at 7:30 PM, Kevin <kleeva5@...> wrote:

Yeah but everytime you launch it, it buggs you to get the premium version!

E-mail is golden!!!
Kevin Lee

From: Steve
Sent: Tuesday, May 14, 2019 3:59 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] converting MP3

I use Free Youtube-to-Mp3 converter from Videosoft.  It is an accessible program, and in the advanced options section is a checkbox to make it "screen-reader" friendly.

Steve

----- Original Message -----

From: patti

Sent: Tuesday, May 14, 2019 11:20 AM

Subject: [jaws-users] converting MP3

Hey Gang,

I’m trying to convert a song from YouTube to a mp3.

What website page is good for this?

Thanks for your help.

Patti
Re: Windows update

Orlando Enrique Fiol
 

Hi Denise.

When I hit the windows key & started typing JAWS isn't talking anymore. It
does open what I typed but is annoying that there is no speech.
Sometimes with Windows updates, you have to reboot for Cortana and settings to work properly. This explains why you get no speech after pressing the start menu key.

I think Windows did an update because I couldn't do anything on my
computer.>rebooted my computer & it finally told me an update was in progress.

If JAWS spoke this update progress announcement, it means that only features were being updated. If Windows itself were being updated, you would have to launch Narrator to hear the update progress because JAWS can't load until Windows loads.

Is there any way that JAWS could tell you that an update is in progress?
See above. It depends on whether you're getting a feature update or an operating system update. Feature updates can run at boo tup because the operating system has already loaded. So, you'll hear feature update progress spoken by JAWS. But JAWS can't run during operating system updates because Windows hasn't yet loaded.

It
does ask you if you want to update JAWS now but I think Windows just does it
automatically.
You can set Windows to restart automatically when an update is ready. You can set it to notify you when the update is ready, or turn that off.



Orlando Enrique Fiol
Ph.D. in Music Theory
University of Pennsylvania
Professional Pianist/Keyboardist, Percussionist, Arranger, Performer and Pedagogue
Home: (980) 585-1516
Mobile: (267) 971-7090
Email: ofiol@...
Re: converting MP3

Orlando Enrique Fiol
 

Hi there.

Is it the Youtube to MP3 Converter from Media Human. I've tried it
and it's not at all accessible with JAWS. In fact I've not even
able to find any menus.
The only solution is to edit MediaHuman's registry keys. All the necessary values are easy to figure out. For anyone who has installed the program, I can email you a .re file with all my settings. All you have to do is open the file and the settings will automatically get imported. I have mine set to minimize to the system tray, too convert links copied to the clipboard automatically, to convert at the highest bit rate (320k)

and to name files with artist and title.
Orlando Enrique Fiol
Ph.D. in Music Theory
University of Pennsylvania
Professional Pianist/Keyboardist, Percussionist, Arranger, Performer and Pedagogue
Home: (980) 585-1516
Mobile: (267) 971-7090
Email: ofiol@...
Re: latest CCleaner

Dennis L
 

Will it automatically cleaning browsing history?  I really wish Jaws would script for CCleaner or get a dialog going with them to make it accessible.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of emile
Sent: Friday, May 17, 2019 1:53 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] latest CCleaner

 

You might want to try cleaner.exe.  It’s an old program but it is accessible.  I don’t know if it is as good as ccleaner.

Emile.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Dennis L
Sent: Friday, May 17, 2019 12:10 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] latest CCleaner

 

I quit using there products because they don’t care about accessibility.  Is there a accessible product that does what C cleaner does that is accessible with Jaws?

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Mike B
Sent: Friday, May 17, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] latest CCleaner

 

Howdy Kimsan,

 

They now have Custom and Easy Clean options and I haven't figured either one of them out!  LOL   I've tried different Jaws versions and that other 4 letter screenreader without any luck.


Take care.  Mike.  Sent from my iBarstool.  Go Dodgers!
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----

To: 'jaws'

Sent: Friday, May 17, 2019 8:57 AM

Subject: [jaws-users] latest CCleaner

 

Hi,

I installed the latest CCleaner, does anyone have any idea how to use it?

I’m not finding the windows or applications tab, even if I use the touch cursor.

The version ends in 7182. I downloaded the slim version, too.

 

Thankyou,

Sincerely,

Kimsan Song

kimsansong@...

 
Re: latest CCleaner

emile
 

I found out that if use the shortcut alt-c it will work just fine.  The shortcut alt-e stands for easy clean will get rid of traces of files left behind which will make your computer less conspicuous on the internet.

Emile.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Kimsan via Groups.Io
Sent: Friday, May 17, 2019 10:57 AM
To: 'jaws' <jaws-users-list@groups.io>
Subject: [jaws-users] latest CCleaner

 

Hi,

I installed the latest CCleaner, does anyone have any idea how to use it?

I’m not finding the windows or applications tab, even if I use the touch cursor.

The version ends in 7182. I downloaded the slim version, too.

 

Thankyou,

Sincerely,

Kimsan Song

kimsansong@...

 
Re: latest CCleaner

emile
 

You might want to try cleaner.exe.  It’s an old program but it is accessible.  I don’t know if it is as good as ccleaner.

Emile.

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Dennis L
Sent: Friday, May 17, 2019 12:10 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] latest CCleaner

 

I quit using there products because they don’t care about accessibility.  Is there a accessible product that does what C cleaner does that is accessible with Jaws?

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Mike B
Sent: Friday, May 17, 2019 12:56 PM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] latest CCleaner

 

Howdy Kimsan,

 

They now have Custom and Easy Clean options and I haven't figured either one of them out!  LOL   I've tried different Jaws versions and that other 4 letter screenreader without any luck.


Take care.  Mike.  Sent from my iBarstool.  Go Dodgers!
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----

To: 'jaws'

Sent: Friday, May 17, 2019 8:57 AM

Subject: [jaws-users] latest CCleaner

 

Hi,

I installed the latest CCleaner, does anyone have any idea how to use it?

I’m not finding the windows or applications tab, even if I use the touch cursor.

The version ends in 7182. I downloaded the slim version, too.

 

Thankyou,

Sincerely,

Kimsan Song

kimsansong@...

 
Re: latest CCleaner

Glenn / Lenny
 

Hey Kimsun,
Have you tried it with the touch cursor?
I have used it, and I don't recall if I had to use the Jaws cursor or the touch cursor.
Glenn

----- Original Message -----
From: Mike B
Sent: Friday, May 17, 2019 11:56 AM
Subject: Re: [jaws-users] latest CCleaner

Howdy Kimsan,
 
They now have Custom and Easy Clean options and I haven't figured either one of them out!  LOL   I've tried different Jaws versions and that other 4 letter screenreader without any luck.

Take care.  Mike.  Sent from my iBarstool.  Go Dodgers!
I don't know the key to success, but the key to failure is trying to please everybody.
----- Original Message -----
To: 'jaws'
Sent: Friday, May 17, 2019 8:57 AM
Subject: [jaws-users] latest CCleaner

Hi,

I installed the latest CCleaner, does anyone have any idea how to use it?

I’m not finding the windows or applications tab, even if I use the touch cursor.

The version ends in 7182. I downloaded the slim version, too.

 

Thankyou,

Sincerely,

Kimsan Song

kimsansong@...

 
Windows update

Denise J Moses
 

When I hit the windows key & started typing JAWS isn’t talking anymore.  It does open what I typed but is annoying that there is no speech.  I think Windows did an update because I couldn’t do anything on my computer.  I rebooted my computer & it finally told me an update was in progress.  Is there any way that JAWS could tell you that an update is in progress?  It does ask you if you want to update JAWS now but I think Windows just does it automatically.  Does anyone else encounter the Windows key not talking anymore & if so what can I do?

I am using Windows 10.0.17134 & JAWS 2019.1904.60.

 

Also when I ALT tab JAWS isn’t speaking what program I am in so I have to let go to find out.  Any help please.

 

Denise
Re: latest CCleaner

Kimsan <kimsansong@...>
 

Hi Mike,

When clicking on either of the easy or custom, I’m not sure if it’s even cleaning anything.

I won’t mess with NVDA, since you said it didn’t work there.

I’ll keep messing with it as time presents itself, though.

 

Best regards,

 

Kimsan Song

 

kimsansong@...

 

From: jaws-users-list@groups.io <jaws-users-list@groups.io> On Behalf Of Mike B
Sent: Friday, May 17, 2019 9:56 AM
To: jaws-users-list@groups.io
Subject: Re: [jaws-users] latest CCleaner

 

Howdy Kimsan,

 

They now have Custom and Easy Clean options and I haven't figured either one of them out!  LOL   I've tried different Jaws versions and that other 4 letter screenreader without any luck.


Take care.  Mike.  Sent from my iBarstool.  Go Dodgers!
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----

To: 'jaws'

Sent: Friday, May 17, 2019 8:57 AM

Subject: [jaws-users] latest CCleaner

 

Hi,

I installed the latest CCleaner, does anyone have any idea how to use it?

I’m not finding the windows or applications tab, even if I use the touch cursor.

The version ends in 7182. I downloaded the slim version, too.

 

Thankyou,

Sincerely,

Kimsan Song

kimsansong@...

 
3221 - 3240 of 13767