Re: Word 2016 "find"

Rebecca Lineberger

I use control-f to find the word. You will be on a
Find next button rather than the word you searched for.
Press escape and you will be on the word in the text of the document. There
you can use JAWS up arrow to read the line for context.
If that's not the right occurrence of the word, use the Word find next
Shift-f4 and you will be placed on the next occurrence without having to
escape out of a
Find next button. Again use JAWS up arrow to read for context.
Not so hard. Smile.

-----Original Message-----
From: [] On Behalf
Of Adrian Spratt
Sent: Wednesday, July 10, 2019 2:14 PM
Subject: Re: [jaws-users] Word 2016 "find"

Thanks for posting these steps. They do work in Word 2016. Unfortunately,
they've made no difference on my system. If anything, I know longer get the
benefit I described last night when I perform a second "find." With luck,
the situation will return to normal. Did I hear someone say, "Situation
normal. FUBAR"?

-----Original Message-----
From: <> On Behalf Of
Rebecca Lineberger
Sent: Wednesday, July 10, 2019 7:34 AM
Subject: Re: [jaws-users] Word 2016 "find"

I saw this years ago in a Word tutorial that I got, I think, from National
Braille Press. I changed it in my Word 2010.
It may be worth looking at in Word 2016 or 365 to see if it's still doable.
Restoring the traditional find command in Word # Find Command for Word 2010
and above.
Here are the steps for getting CTRL+F to work in the traditional manner.
These steps work in Word 2013. I don't have Word 2016 but I think they
should also work in that version of Word.

1. Use Alt with F followed by T to go into the Word options.
2. In the list of categories either use down arrow or press the letter
C until you get to the "customize ribbon" category.
3. Press Alt with T to use the customize button.
4. Use down arrow until you get to the Home tab.
5. Tab to the commands list.
6. In the commands list press E until you find the "EditFind" command.
7. Tab a couple times to the "press new shortcut key" box.
8. Press CTRL with F.
9. Tab to the Save Changes In box and choose Normal.DOTM.
10. Tab to the Assign button and press spacebar.
11. Tab to the Close button and use spacebar.
12. Tab to OK and use spacebar.

-----Original Message-----
From: [] On Behalf
Of Adrian Spratt
Sent: Wednesday, July 10, 2019 12:12 AM
Subject: Re: [jaws-users] Word 2016 "find"

Hi Ann,

With a similar configuration, I just tested Word's "find" feature and
realize I'm having a similar experience. However, I'm so used to treating it
as a trial-and-error function that I hadn't noticed. Let me detail two
experiments I just tried.

First, I pressed control-f and typed in my search term. The only way to read
the term in context was to press escape and then insert-8 ("say line").
Initially, JAWS wouldn't read the line with insert-8, but it did so on my
second press. So, how to reach the next result? I pressed control-f again.
As I recall (I can't replicate this now JAWS verbalized "Next result."
Assuming correctly that I was still on the first result, I pressed the
spacebar. I landed on the second result, but JAWS remained uncooperative.
The only way to read the context was, again, to press escape and then
insert-8, the say line command.

Now, this gets interesting. I abandoned that search and started one for a
different term. This time JAWS read the results pretty much as I expected
and wanted. I pressed control-f and enter. JAWS read the context and then
"Next result." I could press escape if I wanted to stay at that point or the
spacebar if I wanted to move on. I chose a term that had numerous
occurrences in that document, and it proceeded the same way throughout.

This is consistent with my experience. My first time through is hit-or-miss.
The second time, for whatever reason, the "find" function works well.

It's important because of the limitations of the JAWS search feature, which
can find only whole words, not search strings that might or might not be
words. Also, Word reports the number of instances of a search term.

I hope this is helpful. I realize it may not sound like it is. And you never
know with JAWS, what works for one person might not for another.

-----Original Message-----
From: <> On Behalf Of Ann
Sent: Tuesday, July 9, 2019 9:05 PM
Subject: Re: [jaws-users] Word 2016 "find"

I have tried f6. I get the same result.
At 07:27 PM 7/9/2019, you wrote:
I had problems with the find command since I moved to windows 10. An
alternative key to use is the F6 which brings up the search box just
like it does with the ctrl+f, give it a try.

-----Original Message-----
From: [] On
Behalf Of Ann Byrne
Sent: July 9, 2019 6:22 PM
Subject: [jaws-users] Word 2016 "find"

windows 10, 1903
JAWS 2019 June version
Word 2016 retail
JAWS Word classic scripts.

When I press ctrl+f and type in the word 'team' and press enter, JAWS
tells me 'not available in tables or spellcheck ..." or some other
apps. then it says, "one of two". if I press enter on what is
obviously the "find next" button, JAWS speaks the same message, with
the addition of "two of two". It is finding the data. However,
insert+c generates the same "not available" message. Escaping from
the find dialog leaves the cursor on the word, selected.

How can I make JAWS tell me it has found the word and read the word in

Much thanks,


Join to automatically receive all group messages.