I've got a couple of those nearly indestructible ICOM IC-28H and 37A VHF transceivers (146 and 220 MHz, respectively) from the 1980s, and have not been able to find any online fan groups for them. I'm

Only getting about 25 watts out or so on HF, VHF/UHF is fine, full power.....Its NOT the power cord, I've tried a couple different ones, same result, and those cords work fine with my 7300, I had a pr

Purchased a used IC7000 when it is turned on it displays the previous owners call letters. How can i delete this and inter my call letters ?

Using the 7000 with ACLog. Connected data port on rig to laptop with RigRunner. Works great to capture the frequency. How do I connect the rig to the laptop for ACLog to transmit CW please? Thanks!

What are easy (and cheap) way to get radio to laptop control? Also what cable and laptop do I need. Just getting started. Thanks kc2mzw

I recently fixed an IC-7000 with seriously burned driver. Due to lack of the outdated parts from ICOM support, I created the PCB and uploaded the files to github and oshpark, hope this may help who wa

Hey, So a new problem on my 7000 Hf---Ok VHF--OK UHF power ok and working buth a to high level of ALC and...50% power if i puth my mice without modulation!!! problems with the UHF Pa...normaly ir the

Greetings, I'm looking for a source of a CT-39 cable (6 pin mini Din) with DB-9 connector attached for packet and Winlink use. Thanks, Doug VE1ZG

Greetings, what is the best solution for interconnecting IC-7000 to PC when using Direwolf for packet or APRS? Doug VE1ZG

Icom IC-7000 multimode HF + 50, 144, 430 MHz transceiver. Only a couple of hours use in like-new condition. $725 plus shipping. LDG Electronics IT-100 tuner plus cable for IC-7000. Never used. $120 pl

Hi, The main board of IC7000/driver board was sold , PA unit ,DDS unit, CPU(working perfectly checked) ,case ,ribbon cables,cooling fan interested people can contact me ,you can use as spares for othe

Does anyone know where I could source a replacement mic cable for my HM-151? The curly one with RJ-45 ends. Thanks and 73 de NN4E

I recently discovered that my IC-7000 has the same 6-pin mini-DIN connector as my VHF/UHF Kenwood TM-V71A. So I took my FSQ/FLDIGI cable out of the Kenwood and plugged it into the IC-7000, tuned the r

Hello All, I'm looking at putting my IC-7000 online as my Winlink HF Gateway. There is NO Radio listing in RMS Express for the 7000. I have tried the Icom Amateur Radio's and the Early version as well

Looking forward to see more information on the ic7000 Dirk VE3HDJ

Hey, guys please find on this link the updated CT17B-6BT CI-C Bluetooth Hub user manual updated with the IC-705 configuration procedure. can also be used to isolate the PC business of your shack from

Hi, as it has been discussed earlier I have been messing with the rather known potential issue - the TCXO's crystal aging. The service menu REF hex value of FF does not tune my 2LO to the required 124

Hi all: Pulled the radio out of storage and attempted to power up the rig and it is completely dead. I have verified 13V at the PA board and 3.3V at the regulator on the CPU board. I traced the PWRK s

Hello ! I am new hire so warm hello for all IC7000 owners. My rig serve me perfect for 6 years in many UHF SHF test and I am still fascinated with it. To be quick: my LO is off. On 2m 1,2 kHz and on 7

Greetings, I recently acquired a used IC-7000 in good condition. I just ordered the RT Systems software and cable for memory programming. I also have the CT-17 CI-V unit without cables and a USB type