modding the Driver board ? i see that icom did mod the driver board with an added resister to stop it self oscillating, and burning it self out, does this work ? I have seen on youtube TRX Bench that

Hi My mosfet RD60HUF arrived today from china i paid £18 for it i should have found out the price from icom for this mosfet, ,i put it on my peak atlas dca 75 pro and it tested ok, The print on it was

Hi, in the adjustment menu i can not get the driver idle current down to the 1 amp setting the lowest it will go to is 2.56 amps but it could be some leakage on any of the other output transistors ? i

Any updates on the opc-1443 or a substitute? Thomas McCain KC5ETW

Has anyone used the MFJ-1708 T/R switch and a SDR with the IC7000? Also were they able to control the radio thru SDRPlay?

Last date on his website was 2021.

Hi what power are users getting out of there radios on uhf, are they seeing 35w as per icom specs, Thanks Dave 2E0DMB

i can not get my radio in to adjustment mode, am i doing something wrong, i have a uk (10) model , i am doing as page 16 of the service manual says,and the radio just starts up as normal, my civ port

Please Can I be considered for membership of the group. As I own an IC7000 that is giving me trouble My Call sign Is VK6YV Peter Savage 6 Stadia Court Beldon 6027 Western Australia 73s Peter Virus-fre

IC-7000-HDMI Separtation Kit DM5AI Manual attached. I have used it for a year. Jim WI6X

I picked up a second IC7000 at the hamfest.. Rig is 9.5 of 10.. It came from an estate, and there was no box, no separation cable- control head mounting. There was a 706markII and it had the separatio

Has anyone recorded the proper voltages under any condition at IC1601, particularly pins 8, 9 and 10. And the area of Q1604? If so, thanks!

First of all i like to thank everyone for responded to my first question with a solution. Now I am trying to down load my area uhf/vhf frequencies into my ic7000 from the call book which is suppose to

Helping a friend over the radio and trying to help him get WSJT-X running with his 7000 and a Signalink interface. Can someone provide me with the instructions to do this. Getting the rig error messag

Just received the RT System program and i don,t see any where in the instructions where you plug the the cord into the back of the radio ? Can any one help this 78 year old new be ? VE3LGP

After an RF feedback event, my IC7000 has very low TX audio. The TX power meter barely moves when speaking into the microphone in SSB mode, and on FM, the deviation is only 1 kHz. The MIC Gain setting

Hello everyone I have a problem with my Ic 7000 this is it, the problem is on the TX part, it usually works regularly but suddenly it happens that the power drops considerably, for example it goes fro

Hello All, Anyone happen to have a IC-7000 file that was done with CHIRP software. Trying to setup some memory channels in my 7K and CHIRP will not save the empty memory files to my pc so I can edit t

hello Gang, Here are my new Acrylic Call Sign Displays, with Dual LED Zones and ICOM CI-V Bluetooth hubs or Yaesu FT8X7 Bluetooth interfaces. Drop-in to WWW.VE2DX.COM or contact me at ve2dx@... if int

I have a new amplifier and need to run <12 watts so will need to reduce my output power on a continuous basis. Is thi sage for the IC7000?