I recently discovered that my IC-7000 has the same 6-pin mini-DIN connector as my VHF/UHF Kenwood TM-V71A. So I took my FSQ/FLDIGI cable out of the Kenwood and plugged it into the IC-7000, tuned the r

Hello All, I'm looking at putting my IC-7000 online as my Winlink HF Gateway. There is NO Radio listing in RMS Express for the 7000. I have tried the Icom Amateur Radio's and the Early version as well

Looking forward to see more information on the ic7000 Dirk VE3HDJ

Hey, guys please find on this link the updated CT17B-6BT CI-C Bluetooth Hub user manual updated with the IC-705 configuration procedure. can also be used to isolate the PC business of your shack from

Hi, as it has been discussed earlier I have been messing with the rather known potential issue - the TCXO's crystal aging. The service menu REF hex value of FF does not tune my 2LO to the required 124

Hi all: Pulled the radio out of storage and attempted to power up the rig and it is completely dead. I have verified 13V at the PA board and 3.3V at the regulator on the CPU board. I traced the PWRK s

Hello ! I am new hire so warm hello for all IC7000 owners. My rig serve me perfect for 6 years in many UHF SHF test and I am still fascinated with it. To be quick: my LO is off. On 2m 1,2 kHz and on 7

Greetings, I recently acquired a used IC-7000 in good condition. I just ordered the RT Systems software and cable for memory programming. I also have the CT-17 CI-V unit without cables and a USB type

Hello Gang! Here is a short update from WWW.VE2DX.COM and what we been up to! Keep an eye out for the soon to be released CT17B-6USB and CT-17B-6USB-Plus that offers a USB port, 5 CI-V ports with a de

Hi i have two IC7000 radios and I love them. I have one mobile in my car and it’s just great. However, I recall reading somewhere that even when the radio is “off” it’s still drawing a small current -

Hello, I have two ic7000's belonging to a friend that I am trying to evaluate / troubleshoot / fix. They both have the same odd problem. When first powered up, they seem to work properly. However, if

Hi, so i have a problem with my 7000 , first i had the click click error.Control of the rig an i foud a burned C. replaced this one and now nothing is hapend isf i push the onn button. Have any one an

Sorry, I though I was on the IC9700 forum Please disregard my previous reply.

Recently I had a hard drive failure on the computer I use for digital modes on my IC-7000. A newer computer with Windows 10 does not automatically create a com port for the interface that has been wor

I bought a 7K (after having been out of the hobby for 30 years) and it’s a great little radio BUT the temp gauge always shows HOT, even after just switching on. also the fan always runs, even after ju

Help, I can key up repeaters so I know the RF transmit is working, but no audio gets out. I have two iCOM 7000s so I have tested the parts interchanged between the two. Both receive well and both tran

I bought a 7K (after having been out of the hobby for 30 years) and it’s a great little radio BUT the temp gauge always shows HOT, even after just switching on. also the fan always runs, even after ju

I seen some people were looking for the remote head cable Rich W6ABJ https://www.facebook.com/groups/HamRadioForSale/permalink/1966424013495414/?sale_post_id=1966424013495414

Is it possible to make your own head separation cable? Are the connectors available? A check on the internet shows these cables to be pretty much extinct. Larrie AF7NU

I have no problems with accessing and controlling my ICOM 7000 radio using HRD Rig Control. What I am not able to do is get the memory management to work with HRD. I have tried some other software for