Just wonder if anybody have used this display?<top>

Just wonder if anybody have used this display?<top>

Is anyone using the CI-V interface cable with FTDI chip on Windows 10 with Icom 7000? My interface only works on Windows 11 but on Windows 10 the USB port is recognized but will not control the radio.

Hi All Is there a way to add extra (different frequency) offset to the drop down menu ? Thanks Morrie

Just received the new ci-v/usb FTDI interface for the Icom IC-7000 and works fine on Windows 11. Can't get it to communicate with the radio on Windows 10. Serial port ids as FTDI. Drivers updated, pro

Anyone using the 7000 in FT8? Comments?

I've been tasked to provide a 6M station for June field day. With a SDR running on a computer. Purpose is to provide visual to visitors. No clue how to set up for this with an ICOM 7000. Any help as t

Just purchased another ci-v/usb interface for my Laptop running Windows 10 but can't get it connect to Icom IC-7000. Works fine on the desktop PC running Windows 11. This interface uses the FTDI chip

Perhaps this may be related to a prevous thread (or maybe not). I have recently been migrating to Lnux OS and been very pleased to find WJTX and FLDIGI for Linux. At first, both programs seemed to wor

I see where the narrowest CW filter is 250 hz. However, from the manual am I to understand that I can reduce the CW bandwidth even more, to 50 hz?

My IC-7000 had been sitting a while and has a history of very light use. One night I pulled it out and decided to update the local repeaters. After programming the IC-7000 with R T Systems software, I

I setup a DigiRig to my IC-7000 and connected the audio in/out/PTT to the Accessory connector. I was wondering if there is a compelling reason to use the DATA jack instead? From what I read in the man

Just got an IC-7000 from estate sale, never out of the box. Are the 7 inch monitors still available somewhere in North America? VE9MB

My 7000 seems to have developed a strong hiss in the receive mode. Originally, I thought it was is atmospheric but the noise didn’t change when the coax was disconnected. some details that help diagno

https://eham.net/classifieds/604682 In case you're looking for one. It's not mine, I just came across the ad.

Hello, I am new to this group. I did try to send this before and I didn't see it pop up in the list so apologies if it comes up twice. I have been looking at a crook IC-7000 for a friend of mine which

Hello, I am trying to fix a friend's 7000 that is iffy on TX on 10 & 14 MHz. I immediately think that there maybe an issue with the LPF relays / components on these bands as I see that the 10 and 14 M

My IC-7000, installed on my boat, has died in a direct lightning strike. I would like to replace it with another, in anyone has one to sell. Thanks Chip AE5KA

Hi group, I am trying, and trying, to get the CW keyer memories play. But they simply won't. I can set the content of the four memories without problem, but when going into KEY->SND and then pushing a

I have a new logic unit for the 7000 tech told me that was problem with rig got a new logic unit from Icom same problem removed the new unit it is now for sale