I recently purchased a used IC-7000 that did not come with a Mic. I bought a no-name one on Amazon and it had very low audio levels, I can hardly get the ALC to budge unless I drop plosives into the m

Hello guys, as some of you are aware I have a small lab where I work on Ham Radio devices and have been doing a lot of work around CI-V devices and hubs. Well after many months of work, I am introduci

Test message; please forgive. 73, Adam VA7OJ/AB4OJ

Since '03, I'd been using the same antenna for 6 and 2m, a log periodic that was really just a 6m antenna but which worked "OK" on 2. As I'm spending most of my operating time on 6m, I upgraded that a

I want to control the icom-7000 from a computer using the HamRadioDeluxe software through the CT-17. I don't have a USB CI-V Cat Interface Cable to connect it directly to a computer. When I use CT-17

ic7000 made in japan - B6249k serial 0801640 thanks colin vk3zzs (qrz.com)

Does anybody remember the name/call of the fellow who put these kits together years ago? I had the info several years ago when I bought one of those kits, but can't remember where I stashed it. I thin

Problem solved. I was using wrong cable between monitor and the 7000. The video from the 7000 goes via a simple mono cable (3.5mm output jack) to a yellow RCA male plug which then connects to the yell

When I hook it up, the monitor shows "NO SYNC." Is there something in/on the 7000 I need to do to make it work? It had worked in the past, but maybe I have forgotten something 73 - Mac, K2GKK/5 Since

I am ready to part with my IC-7000 and accessories. I am the original owner. I am posting here to our group before moving on to QRZ and/or eBay. IC-7000, Serial #512337, MARS Mod by Icom Authorized Se

Can you use the IC7000 cable for programing the IC 207 ? Is the IC207 the same as the IC207H ? Does anyone have the computer program for the IC207 you could send to me ? Thanks James NQ7L

I guess we all have to realize, our beloved '7000 radios are getting old (hi hi) and nothing lasts forever. Since Icom has discontinued the radio (sad), they cannot be replaced, so we all do our best

Hi Does anyone know why icom did the auto band switching voltage as a mod, and not have it working from the start without soldering a link between tracks, Thanks Dave

Just got a new ic 7000 installed don't have the HD antenna attached, but the vhf/uh is. While in vhf mode I key up, the radio shuts down and restarts. Is this caused by tmnot having a HD antenna attac

modding the Driver board ? i see that icom did mod the driver board with an added resister to stop it self oscillating, and burning it self out, does this work ? I have seen on youtube TRX Bench that

Hi My mosfet RD60HUF arrived today from china i paid £18 for it i should have found out the price from icom for this mosfet, ,i put it on my peak atlas dca 75 pro and it tested ok, The print on it was

Hi, in the adjustment menu i can not get the driver idle current down to the 1 amp setting the lowest it will go to is 2.56 amps but it could be some leakage on any of the other output transistors ? i

Any updates on the opc-1443 or a substitute? Thomas McCain KC5ETW

Has anyone used the MFJ-1708 T/R switch and a SDR with the IC7000? Also were they able to control the radio thru SDRPlay?

Last date on his website was 2021.