Ok, 3D printer back online and plenty of parts came in so the CT-17Bs (Icom CI-V hubs) and IAB1 (Icom Breakout Boxes are available for shipment again this week. https://www.youtube.com/watch?v=YkKvKKs

https://www.youtube.com/watch?v=3FWcMfHGcwQ Well still working on the IMK keypads family of products, looks like the first products to come out will be the IMK2 for highend ICOM radios with Keypad jac

Hi I want to bring my IC7000 in operation for FT8. but need some guide : What is needed of HW for correct setup What is recommended Power Out to use with IC7000 on FT8 Do you have any other alternativ

Hello to all, I have designed a small base for mounting an handheld antenna on the side of my 7000 radio. is is 3d printed and very easy to make. I thouht that might be of interest to some of you here

Good morning, group, Does anyone have a source for a cable for connecting the 7000 to a Coastal Chipworks TNC-X, or the pin-out to build one? Perhaps I am blind as a bat or dumb as a rock, but I can’t

After posting this, things I didn't realized.... 1. My RF power was quite low (3). 2. Laptop audio (SDR station on 14.255) was going out to US Navigator. Can't repeat problem, but I wonder how I'm hea

Hi I’m going to repair an IC-7000 of a very friend of mine. Driver unit is fauly as you can see in attach. Before to fix PD55015, I’m going to seek a new driver unit board, if it’s possible. Could any

Moderator Assuming there is one. Please try to filter out this spam

Hey gang! Juste finish the new design of my Icom CI-V hub, it is a mordern replacement for the original Icom CT-17 with or without USB port. The VE2DX CI-V Hub will let you interface multiple ICOM rad

I just subscribed to the group this evening; my name is Terry Young, call sign n0ve I'm looking for help with a problem. I've had my IC-7000 since 2011 and an AH-4 since 2012. For about the past three

I have a question for the group. A while back I put in a new driver board for the icom 7000. I had just learned about it from another ham. When I got it back, I was testing the radio on 10 m. I have i

It has been a few years since using my rig, but quarantining is making me want to get back to the hobby. I powered up the rig today and I'm having issues with the machine powering off when transmittin

My apologies in advance for a noob question - I don't have access to an elmer. I have been away from my 7000 for a while and am relearning it. I recall with my current setup (MFJ-939 tuner and Cushcra

Hi everyone. I am new to the group and I hope everyone is staying safe.

Here we go gang the units are ready the enclosure now have magnets and we will be ready to ship by next week here are the latest info sorry for the delays its been wild getting the PCBs and hardware i

A local group put a repeater on 6 meters at 50.110+ 127.3 but the input is on 51.410. How do I set this odd split on my IC-7000?

The four metre band here in the UK is undergoing a massive growth of activity. Has anyone successfully modified an IC-7000 to cover that band? 73 es TIA Dave G4CLI

During a ic-7000 repair I found a mysterious circuitry in the PA unit. The board sits on the bottom side of the radio. Inside and invisible it carries the shielded preamp for 2 meters and the preamp F

Somehow in all my switching this past week chasing the VP8, between CW SSB and FT/8, I accidentally added an extra 30 meter screen to the "Band" up and down. That would be OK except when I try to chan

Hi, All, Although I have been ideally looking for an exchange deal on my IC-7200 against an IC-7100, I am not finding any 7100s either at the right price, or close enough in mileage to go and have a l