Hi i am Mike and i am a Amateur radio operator. I had to move in to a apartment building and I tried my HT yaesu ft-60 and then I was told not to do it I know I can do it with in my rights but I have

This thread is screwy from the start. Not normal vernacular from a ham. My 2 cents. 73- W1JCW John From: ic7000@groups.io [mailto:ic7000@groups.io] On Behalf Of D C *Mac* Macdonald Sent: Wednesday, Se

Hello, my 7000 is connected to the radio port of a MFJ-993B tuner. Unfortunately, the tune button on the 7000 does not trigger the low power keying of the transmitter. The TUNE message on the display

Hi i am Mike and i am a Amateur radio operator. I had to move in to a apartment building and I tried my HT yaesu ft-60 and then I was told not to do it agen I know I can do it with in my rights but I

Hi Jim, my ic7000 has problems, when I change band with the up or down button and step from the bands hf to vhf it stops working and crashes. Switching from 29.999 mhz to 30 mhz the monitor goes off a

Group, I’ve recently lost the ability to communicate between my 7000 and HRD using the RTS-01 cable. I checked the voltage on the CI-V and have about 2.5v. An Icom rep tells me that is where it’s supp

Looking to replace the PTT switch on my HM 151. Does someone have a source for these switches ?? 73- W1JCW John

Digi-Key (450-1804-ND). 73- W1JCW John From: ic7000@groups.io [mailto:ic7000@groups.io] On Behalf Of W1JCW Sent: Tuesday, July 17, 2018 8:24 AM To: ic7000@groups.io Subject: [ic7000] PTT switch source

All, Several weeks ago I took my IC-7000 to Galveston and used it to activate the Tall Ship Elissa for Museum Ships Weekend. Our station was setup on the pier along side the ship under an awning. Brig

I hope this is a stupid question with a simple answer. My F1 F2 F3 and F4 buttons do not seem to be functioning. Did a factory reset and still nothing. Have read the manual back to front but still not

Hello all. since Yahoo is gone io is taking over please and hello to all.

Hi all this is driving me nuts. I I have the RTS software for the radio and I can’t get it to work with the ARRL repeater software I have tried downloading a image of the “a” bank and then using the A

I know there is a memory battery inside the IC-7000 but I don't know where its at or how to replace it. I ordered a replacement from Icom America's Parts Department (Thanks Carl Shearer) but they don'

Moved into a condo, that will end my use of HF unless I go mobile. Looking for a decent 7000, cosmetics not to important. Would like to find the separation kit or at least the cables, as they seem har

In the "old days" this could occur when a tube in the audio output developed "microphonics." That is, a slight vibration of the tube would vibrate an element inside the tube, causing the mechanical en

My 7k has been perfectly working for the last 7 years or so, yesterday I switched on and signals were coming in on 40m, changed band and then nothing, all bands dead save for a small hash, checked all

HI, I would like to purchase an automatic tuner for my 7k. I have selected the MFJ-939I and the MFJ-993B. I would prefer the latter, as it is way more versatile. However, as far as I have understood,

My IC-7000 crapped out, again, at Field day last year, no , or low power on HF, (don’t think it’s the fuse problem, as the power cord is not fused, connects to a rigrunner)...second time it happened.

Not me, have three! 73- W1JCW John From: ic7000@groups.io [mailto:ic7000@groups.io] On Behalf Of Mark Schoonover Sent: Wednesday, April 25, 2018 9:59 AM To: ic7000@groups.io Subject: Re: [ic7000] IC-7

A stupid question why not the ICOM AH-4? 73 de Federico IZ1FID ----Messaggio originale---- Da: mypactor@... Data: 30-apr-2018 9.27 A: "ic7000@groups.io"<ic7000@groups.io> Ogg: Re: [ic7000] An auto tun